ELAC VELA FS 407 is a 3-way Passive Bass Reflex Floor-standing speaker by ELAC. It was released in 2018. It features a handmade JET 5 folded ribbon Tweeter, 1 x 6" Midrange and 1 x 6" Aluminum/Paper Woofer. The speaker has a frequency range of 30-50k Hz and a sensitivity of 88 dB. ELAC VELA FS 407 has an MSRP of 5800$ per pair.
Room Size Suitability
The size of the room where you plan to use the ELAC VELA FS 407 is a crucial factor in your decision. We have assessed its suitability for various room sizes based on its dimensions and maximum power output:
| Listening Environment* |
Suitability |
| Near-field | Bad |
| Small Room | Poor |
| Mid-size Room | Good |
| Large Room | Good |
| Very Large Room | Poor |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2, Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: > 400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual listening experience changes depending on floor height, room shape, surface materials, listening position, speaker locations, etc.)
ELAC later replaced VELA FS 407 with Vela 2.0 VFS407.2-GB. Follow the link to read our in-depth comparison of these speakers:
Compare ELAC VELA FS 407 vs Elac Vela 2.0 VFS407.2-GB
ELAC's VELA Series of Loudspeakers
VELA FS 407 is a member of ELAC's VELA series of Passive speakers. The VELA range is ELAC's premium German-designed line, using a JET folded-ribbon tweeter and aluminium-sandwich drivers. Below you can see the main specs of these speakers.
See all 4 ELAC VELA models compared »
ELAC VELA Series Speakers
**This post contains affiliate links, and we will be compensated if you make a purchase after clicking through our links. As an Amazon Associate I earn from qualifying purchases.
Frequency Response of the ELAC VELA FS 407 Speaker
ELAC VELA FS 407 has a Frequency response range of 30-50k Hz at ±3dB and Power Range of 40-130 watts. With a minimum frequency of 30 Hz, VELA FS 407 delivers deep bass that will likely satisfy most listeners, especially those who enjoy music. However, movie enthusiasts and music fans who prefer a full range of sound may still benefit from adding a subwoofer.
Here we have a comparison of how VELA FS 407's Low frequency value compares with the average, max and min Low frequency values in its class.
Low Frequency
Floor-standing Speakers
Thinking about a subwoofer for the ELAC VELA FS 407?
Among the speakers in our database with a max MSRP price of 10000$ (Pair), these are the 5 Passive Floor-standing speakers that have the deeper bass levels than the ELAC VELA FS 407's 30Hz:
Impedance and Sensitivity
ELAC VELA FS 407's nominal impedance level is
4 ohms and has a sensitivity of
88 dB.
Sensitivity
Floor-standing Speakers
Nominal Impedance of the 4 Ohms means that the ELAC VELA FS 407 is a difficult to drive speaker from nominal Impedance perspective, make sure that you choose an amplifier than can provide 4 Ohms for this speaker.
Many AVRs (audio/video receiver) in the market may have difficulty when the speakers dip below the 4 Ohms levels (this may cause clipping or even physical damage), so we recommend to not pair the ELAC VELA FS 407 with an AVR but use an Integrated Amplifier instead.
Sensitivity
88dB of the ELAC VELA FS 407 is an average sensitivity for stereo speaker so it is neither easy nor difficult to drive Sensitivity wise. Work out how loud the ELAC VELA FS 407 plays in your room →
Running more than one pair from a single amplifier? Check the load it would present →
What amplifier does the ELAC VELA FS 407 need?
At normal listening levels in a medium room, about
24–130 W
per channel into 4 ohms.
Set your own conditions and we will rank every amplifier we cover.
Prefer to browse? See every integrated amplifier we cover.
Input Type
VELA FS 407 has Binding post type connectors and lets bi-amping/bi-wiring. Bi-wiring can enhance the overall transparency of your loudspeakers by using separate speaker wires for the low and high-frequency drivers from a single amplifier. Bi-amping, on the other hand, involves using separate amplifiers for the high and low-frequency drivers, potentially resulting in a greater dynamic range and reduced distortion.
Work out what gauge speaker cable this run needs →
ELAC VELA FS 407 External Dimensions and Weight
ELAC VELA FS 407 has external dimensions of (Height x Width x Depth) 40-1/4 x 8-13/16 x 10-3/4inch (1023.0 x 224.0 x 274.0mm ).
Base Surface Area
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base area of ELAC VELA FS 407 is approximately 613.8cm2 / 95.1inch2.
To get a better perspective on the real life size of ELAC VELA FS 407, let's compare it with a standard size Compact Disc which has a diameter of 4.7inch (120mm).
ELAC VELA FS 407 Speaker Size Compared to a Compact Disc
Here we place the ELAC VELA FS 407 virtually next to a standard width amplifier and turntable on a media center to get a better idea about the size.
ELAC VELA FS 407 Floor-standing Speaker next to a Media Stand
Find speakers that fit your shelf or alcove → · Work out where they should sit in the room →
WeightThe ELAC VELA FS 407 weighs 19.14kg / 42.1lbs per piece. Here is a comparison of how VELA FS 407's weight compares with the average, max and min weights in its class.
Weight
All Floor-standing Speakers
Weight
Floor-standing Speakers under $10000
How does the ELAC VELA FS 407 compare to the ELAC VELA FS 409?
One of the natural alternative to the ELAC VELA FS 407 is the VELA FS 409 which is located one step higher in ELAC's Passive Floor-standing selection.
Here is a scaled size comparison of these two speakers to give you an idea how their external dimensions compare:
Comparison image of ELAC VELA FS 407 and ELAC VELA FS 409 Size and External Dimensions
Check the Detailed Comparison of ELAC VELA FS 407 vs VELA FS 409 for more details.
Cabinet type and Materials
ELAC VELA FS 407 has a
Bass Reflex type cabinet and a MDF/Aluminum finish. Bass Reflex type loudspeakers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs.
Speaker Feet
ELAC VELA FS 407 comes with the parts below which you can use to secure your loudspeaker on the surface that you are putting on:
- 4 Spikes
- 4 Pucks
- 4 Rubber pads
It is always recommended to use some kind of feet under all types of speakers. Besides limiting the movement of the speakers, it also compensates for non-flat surfaces and limits the contact surface area of the speaker. Rubber based feet also help isolating the vibrations within certain frequency ranges.
Available colors
ELAC VELA FS 407 is available in Gloss Black.
What's in the Box of ELAC VELA FS 407?
Here are the items that are included inside the box of VELA FS 407:
- Floorstanding loudspeaker
- Base plate
- 2 Jumper straps (pre-installed)
- 4 Spikes
- 4 Pucks
- 4 Rubber pads
- 4 Machine screws
- 4 Washers
- Hex-key
- Operating And Safety Instructions
Recommended Accessories
Here is a list of accessories that we think you may need for the ELAC VELA FS 407.
Warranty
3 Years of parts warranty and 3 Years of labor warranty is generally provided by the manufacturer.