In this review, we will be comparing Vela 2.0 VFS407.2-GB and VELA FS 407, two Passive Floor-standing speakers by ELAC Let's have a brief look at the main features
of Elac Vela 2.0 VFS407.2-GB and ELAC VELA FS 407 first before getting into our more
detailed comparison.
Elac Vela 2.0 VFS407.2-GB Key Specs
- 3-way Design
- " JET 6 AMT Tweeter
- 2 x 6" AS XR cone Woofer
- 30-50k Hz Frequency Response
- 88 dB Sensitivity
- Impedance: 4ohms
- Power Range:Up to 170watts
- Weight:19.10kg
- Dimensions (H x W x D): 1000.0" x 9" x 10.5"( 1000 x 229 x 266 mm )
ELAC VELA FS 407 Key Specs
- 3-way Design
- ---" handmade JET 5 folded ribbon Tweeter
- 6" Midrange
- 6" Aluminum/Paper Woofer
- 6" Midrange
- 30-50k Hz Frequency Response
- 88 dB Sensitivity
- Impedance: 4ohms
- Power Range:40-130watts
- Weight:19.14kg
- Dimensions (H x W x D): 1023.0" x 8-13/16" x 10-3/4"( 1023.0 x 224.0 x 274.0mm )
What size room are the Elac Vela 2.0 VFS407.2-GB and ELAC VELA FS 407 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
| Listening Environment* |
Elac Vela 2.0 VFS407.2-GB |
ELAC VELA FS 407 |
| Near-field |
Bad |
Bad |
| Small Room |
Poor |
Poor |
| Mid-size Room |
Average |
Good |
| Large Room |
Good |
Good |
| Very Large Room |
Average |
Poor |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2, Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: > 400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual listening experience changes depending on floor height, room shape, surface materials, listening position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the Elac Vela 2.0 VFS407.2-GB and ELAC VELA FS 407 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Vela 2.0 VFS407.2-GB and VELA FS 407 are 3-way speakers.
| Driver |
Elac Vela 2.0 VFS407.2-GB |
ELAC VELA FS 407 |
|
Driver Setup
|
3-way
|
3-way
|
|
Tweeter
|
-inch
|
----inch
|
|
Midrange
|
- |
1 x 6-inch |
|
Woofer
|
2 x 6-inch
|
1 x 6-inch
|
Vela 2.0 VFS407.2-GB features a " JET 6 AMT Tweeter and 2 x 6" AS XR cone Woofer with a Crossover frequency at 450Hz and 2400 Hz. On the other hand, the VELA FS 407 features a ---" handmade JET 5 folded ribbon Tweeter , a 6" Midrange and 1 x 6" Aluminum/Paper Woofer .
Frequency Response
Vela 2.0 VFS407.2-GB and VELA FS 407 has exactly the same frequency range of 30-50k Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
Elac Vela 2.0 VFS407.2-GB
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Vela 2.0 VFS407.2-GB and VELA FS 407 have the same Impedance of 4 ohms and their sensitivity is also same at 88 dB.
One thing to keep in mind that the lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit comared to higher impedance speakers especially at high volume levels, so make sure the amp you pair with the Vela 2.0 VFS407.2-GB and the Vela 2.0 VFS407.2-GB can provide this impedance level.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Vela 2.0 VFS407.2-GB can handle a max power of 170 watts RMS from the amp the whereas VELA FS 407 has a max power handling value of 130 watts RMS, 40 watts less than the Vela 2.0 VFS407.2-GB.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Elac Vela 2.0 VFS407.2-GB's and ELAC VELA FS 407's external dimensions. Elac Vela 2.0 VFS407.2-GB has external dimensions of 1000 x 229 x 266 mm ( 40 x 9 x 10.47 inches) whereas ELAC VELA FS 407 has external dimensions of 1023.0 x 224.0 x 274.0mm ( 40-1/4 x 8-13/16 x 10-3/4inch) .
Elac Vela 2.0 VFS407.2-GB is 23mm shorter and 8mm less deeper than ELAC VELA FS 407 but it is also 5mm wider.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Elac Vela 2.0 VFS407.2-GB is approximately 609.1cm2 / 94.4inch2 and base area of the ELAC VELA FS 407 is approximately 613.8cm2 / 95.1inch2. The Vela 2.0 VFS407.2-GB requires 1% less surface area than the VELA FS 407 which gives it a small advantage on placement in tight spaces.
What's in the Box of ELAC VELA FS 407?
Here are the items that come with the VELA FS 407:
Floorstanding loudspeakerBase plate2 Jumper straps (pre-installed)4 Spikes4 Pucks4 Rubber pads4 Machine screws4 WashersHex-keyOperating And Safety Instructions
Max Input Power 
Number of Woofers 
Height 
Base Surface Area 
Price per pair*