SpeakerDecision
  • SPEAKERS by TYPE
    • Passive Bookshelf Speakers
    • Passive Floor-standing Speakers
    • Passive Center Channel Speakers
    • Passive In-wall Speakers
    • All Passive Speakers
    • Powered Subwoofers
    • Powered Stereo Speakers
  • AMPLIFIERS
  • SMART FIND
Parasound NewClassic 200 Integrated Review
Parasound NewClassic 200 Integrated

Main Features

  • 125 watts RMS into 8-ohms
  • Built-in DAC
  • Phono Input
  • USB Input
  • Weight: 11.50 lbs / 5.23 kg
  • Dimensions (H x W x D):2-1/2 x 17-1/4 x 16-3/4 inch
CHECK PRICE

Compare To

x
Add an Amp for comparison
Parasound NewClassic 200 Integrated Review
Parasound NewClassic 200 Integrated Parasound NewClassic...
See at AMAZON

The NewClassic 200 Integrated is an Integrated Amplifier with built-in DAC by Parasound that delivers 125 watts x 2 channels into 8 ohms and 125 watts x 2 channels into 4 ohms. Minimum impedance of 4 ohms makes the NewClassic 200 Integrated compatible with a wide range of loudspeakers. Thanks to its built-in Burr-Brown DAC, you can play digital sources directly without the need for an external DAC unit. Parasound NewClassic 200 Integrated lets you connect your turntable via its Phono input and start listening to your vinyl collection without a hassle. Parasound NewClassic 200 Integrated has an MSRP of 1399$.

There are 2 Parasound amplifiers in our database. Below you can see the main specs of these amps.

Parasound Integrated Amplifier Series
Model Watts RMS (8-ohms) Minimum Impedance Built-in DAC Bluetooth
Parasound NewClassic 200 Integrated
125 watts4-ohmsYesNo
Parasound Halo HINT 6
Compare
160 watts4-ohmsYesNo


**This post contains affiliate links, and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases.

Performance Specs

One of the most important factors when deciding on an integrated amplifier is its power ratings and compatibility with your speaker's impedance requirements.The Parasound NewClassic 200 Integrated is rated at 125 watts RMS into 8-ohms. Parasound provides this wattage at a THD (Total Harmonic Distortion) of 0.1% which is an important indicator of distortion at the given values (lower THD is better).

Here are the main highlights of its performance specs:

  • 125 watts into 8-ohms (20-20k) at 0.1%
  • 125 watts into 4-ohms
  • 4-ohms Min Impedance (allows compatibility with a wide range of loudspeakers)
  • 100dB Signal to Noise Ratio

When pairing the Parasound NewClassic 200 Integrated with a passive Bookshelf (Stand mount) or Passive Floor Standing (Tower) speaker, you have to check if their Max Power Range is below the max wattage of the amp for the given impedance levels. Operating your amp outside of this max range may damage the speakers.


What size of room is the Parasound NewClassic 200 Integrated Amplifier good for?

An essential deciding factor is the size of the room in which you intend to employ the Parasound NewClassic 200 Integrated amplifier. Here, taking into account its maximum power parameters, we analyzed its applicability to various size environments:

Listening Environment Suitability
Near-fieldPoor
Small RoomPoor
Mid-size RoomGood
Large RoomGood
Very Large RoomAverage

Inputs and Outputs

Besides the performance specs of the Parasound NewClassic 200 Integrated, the next important feature set that you have to evaluate is the input and output selections that it offers. Parasound NewClassic 200 Integrated has total of 4 Analog inputs including 1 Phono Input (MM,MC).

Parasound NewClassic 200 Integrated Back View
Parasound NewClassic 200 Integrated Back View (Click the image for the larger version)

Inputs
  • Total Number of Analog Inputs: 4
  • Phono Input
  • 1 Optical Digital Input
  • 1 Coaxial Digital Input
  • USB Input:
    • USB-B(Connect to your computer for playback)

Outputs
  • Stereo RCA Preamp Outputs
  • 3.5mm Headphone Output
  • Subwoofer Output

Bluetooth Connectivity

Parasound NewClassic 200 Integrated doesn't have bluetooth connectivity feature. In order to stream your music via bluetooth, the easiest way is to connect an external bluetooth receiver to your Parasound NewClassic 200 Integrated. Two bluetooth receivers that we recommend are the iFi Zen Blue V2 and the Audioengine B1.

Among the amps in the same price range, these are the 5 amps that have Bluetooth Connectivity:

  • Audiolab 6000A - MSRP 899$ - Compare w/ NewClassic 200 Integrated
  • Rotel A12 MKII - MSRP 1100$ - Compare w/ NewClassic 200 Integrated
  • NAD C 389 - MSRP 1499$ - Compare w/ NewClassic 200 Integrated
  • Cambridge Audio CXA81 - MSRP 1299$ - Compare w/ NewClassic 200 Integrated
  • Cambridge Audio CXA61 - MSRP 999$ - Compare w/ NewClassic 200 Integrated

Phono Input

Parasound NewClassic 200 Integrated features one Phono Input which is compatible with MM (Moving Magnet) type of phono cartridges, you can connect your turntable with MM cartridges directly to this amp without the need for a phono preamp. If you are using an MC cartridge on your turntable, you need to use a phono preamp that has MC phono stage such as the Cambridge Duo or the iFi ZEN Phono.

Subwoofer Output

Parasound NewClassic 200 Integrated has a dedicated subwoofer output which can be used to connect it directly to a powered subwoofer via an LFE(Low Frequency Effects) cable.
Check our Powered Subwoofers page to find a subwoofer that will work with Parasound NewClassic 200 Integrated amp and your speakers.

DAC and Digital Music

The Parasound NewClassic 200 Integrated's built-in DAC allows the connection of digital sources directly, eliminating the need for an external DAC. The DAC chip that is used in the NewClassic 200 Integrated is the Burr-Brown, and supports resolutions up to 24-bit, 192KHZ.
 Handheld Remote
Parasound NewClassic 200 Integrated Handheld Remote

Parasound NewClassic 200 Integrated External Dimensions and Weight

Parasound NewClassic 200 Integrated has external dimensions of (H x W x D) 2-1/2inch x 17-1/4inch x 16-3/4inch (64.0mm x 439.0mm x 426.0mm ). The unit weighs 5.23kg / 11.5lbs.

Base Surface Area
Base surface area of an integrated amplifier may become an important decision factor when the space in your room or desk is limited. The base area of the Parasound NewClassic 200 Integrated is approximately 1870.1cm2 / 289.9inch2.

  • Width: 439.0mm (17-1/4")
  • Height: 64.0mm (2-1/2")
  • Depth: 426.0mm (16-3/4")
  • Weight: 5.23 kg (11.50lbs)
  • Base Surface Area: ~1870.1cm2 / 289.9inch2
  • Volume: ~12.0 liter / 3.2 gallon

Available colors

Parasound NewClassic 200 Integrated is available in Black color options.

Official Product Page

Official manufacturer's product page for the Parasound NewClassic 200 Integrated Integrated Amplifier can be found below:
Official Product Page for Parasound NewClassic 200 Integrated

Warranty

2 Years of parts warranty and 2 Years of labor warranty is generally provided for the Parasound NewClassic 200 Integrated by the manufacturer.

Parasound NewClassic 200 Integrated Detailed Specifications

General
Brand Parasound
Full Model Name Parasound NewClassic 200 Integrated
Amplifier Type Integrated Amplifier
Amp Class Class D
Performance
Watts RMS per Channel into 8-ohms 125 watts
Watts RMS per Channel into 6-ohms N/A
Watts RMS per Channel into 4-ohms 125 watts
Frequency Bandwidth 20-20k
THD 0.1%
Minimum Impedance 4
Signal to Noise Ratio 100 dB
Digital Music
Built-in DAC Yes
DAC Specs Burr-Brown
Bluetooth No
WiFi N/A
Ecosystem
Apple AirPlay No
Apple AirPlay2 No
DTS Play-Fi No
Chromecast built-in No
Roon No
HEOS No
BluOS No

CONNECTIONS
Total Analog Inputs 4
Phono Input Yes
Optical Digital Inputs 1
Coaxial Digital Inputs 1
USB Input Yes
USB Type USB-B(Connect to your computer for playback)
Preamp Outputs Stereo RCA
Pre-out / Main-in Loop No
Headphone Output 3.5mm
Subwoofer Output Yes
Removable Power Cord IEC 3-prong
PHYSICAL SPECS
Height 64.0mm (2-1/2")
Width 439.0mm (17-1/4")
Depth 426.0mm (16-3/4")
Weight 5.23 kg (11.50lbs)
Available Colors Black
OTHER
Parts Warranty 2 Years
Labor Warranty 2 Years
Parasound NewClassic 200 Integrated Alternatives in No Streaming Amplifiers
Model Watts RMS (8-ohms) Minimum Impedance Built-in DAC Phono Stage
Audiolab 6000A
Compare
50 watts4-ohmsYesMM
Parasound Halo HINT 6
Compare
160 watts4-ohmsYesMM,MC
Yamaha A-S801
Compare
100 watts4-ohmsYesMM
Cambridge Audio CXA81
Compare
80 watts4-ohmsYesNo
Rotel A14 MKII
Compare
80 watts4-ohmsYesMM
Yamaha A-S501
Compare
85 watts4-ohmsYesMM
Rotel A12 MKII
Compare
60 watts4-ohmsYesMM
Rotel Diamond RA-6000
Compare
200 watts4-ohmsYesMM
Latest Amplifiers
Audiolab 8300A
Audiolab 8300A
75 watts into 8-ohms
Audiolab 6000A MKII
Audiolab 6000A MKII
50 watts into 8-ohms
WiiM Amp Pro
WiiM Amp Pro
60 watts into 8-ohms
Cambridge Audio CXA81 Mk II
Cambridge Audio CXA81 Mk II
80 watts into 8-ohms
Cambridge Audio EXA100
Cambridge Audio EXA100
100 watts into 8-ohms
WiiM Vibelink
WiiM Vibelink
100 watts into 8-ohms
Naim Uniti Nova Power Edition
Naim Uniti Nova Power Edition
150 watts into 8-ohms
WiiM Amp
WiiM Amp
60 watts into 8-ohms

Most Popular Amplifiers
Audiolab 7000A
Audiolab 7000A
70 watts into 8-ohms
Yamaha A-S801
Yamaha A-S801
100 watts into 8-ohms
Denon PMA-900HNE
Denon PMA-900HNE
50 watts into 8-ohms
Yamaha A-S301
Yamaha A-S301
60 watts into 8-ohms
Denon PMA-1700NE
Denon PMA-1700NE
70 watts into 8-ohms
Yamaha A-S501
Yamaha A-S501
85 watts into 8-ohms
Rotel A14 MKII
Rotel A14 MKII
80 watts into 8-ohms
Audiolab 6000A
Audiolab 6000A
50 watts into 8-ohms
Rotel A12 MKII
Rotel A12 MKII
60 watts into 8-ohms
Rotel Diamond Series RA-6000
Rotel Diamond Series RA-6000
200 watts into 8-ohms

Copyright © 2025 by SpeakerDecision
About Privacy Contact US Camera Decision