The N22 Gen 2 is an integrated amplifier by Audioengine that delivers 50 watts x 2 channels into 8 ohms. It was released in August 2023. It is a 2-channel design using a Class A/B output stage. A minimum impedance of 4 ohms makes it compatible with a wide range of loudspeakers. It has a built-in DAC, so you can play digital sources directly with no separate DAC unit needed. The Audioengine N22 G2 has an MSRP of $269.
Audioengine replaced the older Audioengine N22 with this model. Follow the link to read our detailed comparison of these models:
Compare Audioengine N22 G2 vs Audioengine N22
There are 2 Audioengine amplifiers in our database. Below you can see the main specs of these amps.
Audioengine Integrated Amplifier Series
Performance Specs
One of the most important factors when deciding on an integrated amplifier is its power ratings and compatibility with your speaker's impedance requirements. The Audioengine N22 G2 is rated at 50 watts RMS into 8-ohms. Audioengine provides this wattage at a THD (Total Harmonic Distortion) of 0.055% which is an important indicator of distortion at the given values (lower THD is better).
Here are the main highlights of its performance specs:
- 50 watts into 8-ohms (20 Hz-20 kHz) at 0.055%
- 50 watts into 6-ohms
- 50 watts into 4-ohms
- 4-ohms Min Impedance (allows compatibility with a wide range of loudspeakers)
- 90dB Signal to Noise Ratio
How loud will 50 watts actually play in your room? →
Wiring more than one pair of speakers to it? Check the load first →
Which speakers suit the Audioengine N22 G2?
50 W into 8 ohms, 50 W into 4, rated down to 4 ohms.
We rank every passive speaker we cover against it on power, impedance safety and current
delivery.
Need more power?
Audioengine N22 G2 is rated at 50 watts into 8 ohms, which puts it in our Up to 60 watts band. The next band up is 61 to 90 watts, which is worth about 3.9dB more output. That is a real difference in headroom on peaks, and a modest one in how loud the system plays - power and loudness are not the same thing.
Before buying watts, check what your speakers actually need: the amp and speaker matcher works it out from their sensitivity, impedance and your room.
When pairing the Audioengine N22 G2 with a passive Bookshelf (Stand mount) or Passive Floor Standing (Tower) speaker, you have to check if their Max Power Range is below the max wattage of the amp for the given impedance levels.
Operating your amp outside of this max range may damage the speakers.
What size of room is the Audioengine N22 G2 Amplifier good for?
An essential deciding factor is the size of the room in which you intend to employ the Audioengine N22 G2 amplifier. Here, taking into account its maximum power parameters, we analyzed its applicability to various size environments:
| Listening Environment |
Suitability |
| Near-field | Average |
| Small Room | Good |
| Mid-size Room | Average |
| Large Room | Poor |
| Very Large Room | Bad |
Inputs and Outputs
Besides the performance specs of the Audioengine N22 G2, the next important feature set that you have to evaluate is the input and output selections that it offers.
Audioengine N22 G2 has total of 2 Analog inputs .
Audioengine N22 G2 Back View (Click the image for the larger version)
Inputs
- Total Number of Analog Inputs: 2
- USB Input:
- USB-C input for connecting a smartphone
- computer
- tablet
- or other compatible device to play music
Outputs
- Speaker Outputs
- Stereo RCA Preamp Outputs
- 3.5mm Headphone Output
Bluetooth Connectivity
Audioengine N22 G2 features built-in Bluetooth for wireless music streaming from your Bluetooth-enabled devices such as Apple iPod/iPhone/iPad, Android smartphone/tablet, Windows PC, Mac computers/laptops.
Among the amps in the same price range, these are the 5 amps that have Bluetooth Connectivity:
Audioengine N22 G2 supports the following Bluetooth Codecs when used with supported devices:
Phono Input
Audioengine N22 G2 doesn't have a phono input so in order to play your vinyl albums, Audioengine N22 G2 has to be paired with a Phono Preamp that is MM (Moving Magnet) or/and MC (Moving COil) depending on your cartridge type.
Subwoofer Output
Audioengine N22 G2 has Stereo RCA preamp outputs which can be used to connect to a powered subwoofer via an RCA cable ( as long as your sub supports this connection).
Check our
Powered Subwoofers page to find a subwoofer that will work with Audioengine N22 G2 amp and your speakers.
DAC and Digital Music
The Audioengine N22 G2's built-in DAC allows the connection of digital sources directly, eliminating the need for an external DAC.
Audioengine N22 G2 Pros and Cons
Drawn from the published figures on this page, not from listening.
- ✓Built-in DAC, so a TV, computer or streamer can connect digitally with nothing in between.
- ✓Bluetooth (aptX HD,AAC,SBC) for playing straight from a phone.
- ✓Pre-outs (Stereo RCA) leave room to add a power amplifier or an active subwoofer later.
- ✓Headphone output (3.5mm).
- ✓At 104mm wide it fits where a full-size component will not.
- ✓Can stand vertically as well as flat.
- ✓Detachable mains lead (C7).
- ✗Output rises only from 50 to 50 watts when the load halves to 4 ohms, so it is happier with an easy 8 ohm speaker than a demanding one.
Audioengine N22 G2 External Dimensions and Weight
Audioengine N22 G2 has external dimensions of (H x W x D) 7-3/16inch x 4-1/16inch x 8-1/4inch (183.0mm x 104.0mm x 210.0mm ). The unit weighs
1.61 kg (3.6 lbs).
Base Surface Area
Base surface area of an integrated amplifier may become an important decision factor when the space in your room or desk is limited.
The base area of the Audioengine N22 G2 is approximately 218.4cm2 / 33.9inch2.
- Width: 104.0mm (4-1/16")
- Height: 183.0mm (7-3/16")
- Depth: 210.0mm (8-1/4")
- Weight: 1.61 kg (3.6 lbs)
- Base Surface Area: ~218.4cm2 / 33.9inch2
- Volume: ~4.0 liter / 1.1 gallon
Available colors
Audioengine N22 G2 is available in Black color options.
What's in the Box of Audioengine N22 G2?
Here are the items that are included inside the box of N22 Gen 2:
- Desktop stereo amplifier
- Base (pre-installed)
- 70-inch AC power cord
- Two 4-feet Lengths of 16AWG speaker wire
- 6.5-feet Stereo minijack cable
- 42-inch RCA stereo cable
- 39-inch USB-C cable
- Cloth amplifier bag
- 2 Cloth cable bags
- Quicstart Guide
- -inchThank You-inch brochure
Warranty
3 Years of parts warranty and 3 Years of labor warranty is generally provided for the Audioengine N22 G2 by the manufacturer.
Audioengine N22 G2 Lifestyle
| General |
| Brand |
Audioengine |
| Full Model Name |
Audioengine N22 (Gen 2) |
| Release Date |
August 2023 |
| Amplifier Type |
Integrated Amplifier |
| Number of Channels |
2 |
| Amp Class |
Class A/B |
| Amplifier Technology |
Solid State |
| Performance |
| Watts RMS per Channel into 8-ohms |
50 watts |
| Watts RMS per Channel into 6-ohms |
50 watts |
| Watts RMS per Channel into 4-ohms |
50 watts |
| Frequency Bandwidth |
20 Hz-20 kHz |
| THD |
0.055% |
| Minimum Impedance |
4 |
| Signal to Noise Ratio |
90 dB |
| Digital Music |
| Built-in DAC |
Yes |
| Bluetooth |
Yes |
| WiFi |
|
| Ecosystem |
| Apple AirPlay |
No |
| Apple AirPlay2 |
No |
| DTS Play-Fi |
No |
| Chromecast built-in |
No |
| Roon |
No |
| HEOS |
No |
| BluOS |
No |
| CONNECTIONS |
| Total Analog Inputs |
2 |
| Phono Input |
No |
| Optical Digital Inputs |
No |
| Coaxial Digital Inputs |
No |
| USB Input |
Yes |
| USB Type |
USB-C input for connecting a smartphone, computer, tablet, or other compatible device to play music |
| Preamp Outputs |
Stereo RCA |
| Pre-out / Main-in Loop |
No |
| Headphone Output |
3.5mm |
| Subwoofer Output |
Yes |
| Removable Power Cord |
C7 |
| PHYSICAL SPECS |
| Height |
183.0mm (7-3/16") |
| Width |
104.0mm (4-1/16") |
| Depth |
210.0mm (8-1/4") |
| Weight |
1.61 kg (3.6 lbs) |
| Available Colors |
Black |
| OTHER |
| Parts Warranty |
3 Years |
| Labor Warranty |
3 Years |