The Vibelink is an integrated amplifier with built-in DAC by WiiM that delivers 100 watts x 2 channels into 8 ohms and 200 watts x 2 channels into 4 ohms. It was released in March 2025. It is a 2-channel design using a Class D output stage. A minimum impedance of 3 ohms makes it compatible with a wide range of loudspeakers. It has a built-in DAC (ESS Sabre 9038Q2M), so you can play digital sources directly with no separate DAC unit needed. The WiiM Vibelink has an MSRP of $299.
There are 4 WiiM amplifiers in our database. Below you can see the main specs of these amps.
WiiM Integrated Amplifier Series
Performance Specs
One of the most important factors when deciding on an integrated amplifier is its power ratings and compatibility with your speaker's impedance requirements. The WiiM Vibelink is rated at 100 watts RMS into 8-ohms. WiiM provides this wattage at a THD (Total Harmonic Distortion) of 0.005% which is an important indicator of distortion at the given values (lower THD is better).
Here are the main highlights of its performance specs:
- 100 watts into 8-ohms (20 Hz-20 kHz) at 0.005%
- 200 watts into 4-ohms
- 110dB Signal to Noise Ratio
How loud will 100 watts actually play in your room? →
Wiring more than one pair of speakers to it? Check the load first →
Which speakers suit the WiiM Vibelink?
100 W into 8 ohms, 200 W into 4, rated down to 3 ohms.
We rank every passive speaker we cover against it on power, impedance safety and current
delivery.
Need more power?
WiiM Vibelink is rated at 100 watts into 8 ohms, which puts it in our 91 to 120 watts band. The next band up is 121 to 180 watts, which is worth about 1.5dB more output. That is a real difference in headroom on peaks, and a modest one in how loud the system plays - power and loudness are not the same thing.
Before buying watts, check what your speakers actually need: the amp and speaker matcher works it out from their sensitivity, impedance and your room. Plenty of systems are better served by the 61 to 90 watts band and better speakers.
When pairing the WiiM Vibelink with a passive Bookshelf (Stand mount) or Passive Floor Standing (Tower) speaker, you have to check if their Max Power Range is below the max wattage of the amp for the given impedance levels.
Operating your amp outside of this max range may damage the speakers.
WiiM Vibelink Amplifier
What size of room is the WiiM Vibelink Amplifier good for?
An essential deciding factor is the size of the room in which you intend to employ the WiiM Vibelink amplifier. Here, taking into account its maximum power parameters, we analyzed its applicability to various size environments:
| Listening Environment |
Suitability |
| Near-field | Poor |
| Small Room | Poor |
| Mid-size Room | Good |
| Large Room | Good |
| Very Large Room | Average |
Inputs and Outputs
Besides the performance specs of the WiiM Vibelink, the next important feature set that you have to evaluate is the input and output selections that it offers.
WiiM Vibelink Back View (Click the image for the larger version)
Inputs
- 1 Optical Digital Input
- 1 Coaxial Digital Input
Outputs
Bluetooth Connectivity
WiiM Vibelink doesn't have bluetooth connectivity feature. In order to stream your music via bluetooth, the easiest way is to connect an external bluetooth receiver to your WiiM Vibelink. Two bluetooth receivers that we recommend are the
iFi Zen Blue V2 and the
Audioengine B1.
Among the amps in the same price range, these are the 5 amps that have Bluetooth Connectivity:
Phono Input
WiiM Vibelink doesn't have a phono input so in order to play your vinyl albums, WiiM Vibelink has to be paired with a Phono Preamp that is MM (Moving Magnet) or/and MC (Moving COil) depending on your cartridge type.
DAC and Digital Music
The WiiM Vibelink's built-in DAC allows the connection of digital sources directly, eliminating the need for an external DAC. The DAC chip that is used in the Vibelink is the
ESS Sabre 9038Q2M, and supports resolutions up to
24-bit, 192KHZ.
WiiM Vibelink External Dimensions and Weight
WiiM Vibelink has external dimensions of (H x W x D) 2.5inch x 8inch x 8.5inch (63mm x 200mm x 215mm ). The unit weighs
2.05 kg (4.5 lbs).
Base Surface Area
Base surface area of an integrated amplifier may become an important decision factor when the space in your room or desk is limited.
The base area of the WiiM Vibelink is approximately 430.0cm2 / 66.7inch2.
- Width: 200.0mm (8")
- Height: 63.0mm (2.5")
- Depth: 215.0mm (8.5")
- Weight: 2.05 kg (4.5 lbs)
- Base Surface Area: ~430.0cm2 / 66.7inch2
- Volume: ~2.7 liter / 0.7 gallon
Available colors
WiiM Vibelink is available in Gray and Silver color options.
Warranty
1 Year of parts warranty and 1 Year of labor warranty is generally provided for the WiiM Vibelink by the manufacturer.
WiiM Vibelink Lifestyle
| General |
| Brand |
WiiM |
| Full Model Name |
WiiM Vibelink |
| Release Date |
March 2025 |
| Amplifier Type |
Integrated Amplifier |
| Number of Channels |
2 |
| Amp Class |
Class D |
| Amplifier Technology |
Solid State |
| Performance |
| Watts RMS per Channel into 8-ohms |
100 watts |
| Watts RMS per Channel into 6-ohms |
N/A |
| Watts RMS per Channel into 4-ohms |
200 watts |
| Frequency Bandwidth |
20 Hz-20 kHz |
| THD |
0.005% |
| Minimum Impedance |
3 |
| Signal to Noise Ratio |
110 dB |
| Digital Music |
| Built-in DAC |
Yes |
| DAC Specs |
ESS Sabre 9038Q2M |
| Bluetooth |
No |
| WiFi |
|
| Ecosystem |
| Apple AirPlay |
No |
| Apple AirPlay2 |
No |
| DTS Play-Fi |
No |
| Chromecast built-in |
No |
| Roon |
No |
| HEOS |
No |
| BluOS |
No |
| CONNECTIONS |
| Phono Input |
No |
| Optical Digital Inputs |
1 |
| Coaxial Digital Inputs |
1 |
| USB Input |
No |
| Preamp Outputs |
No |
| Pre-out / Main-in Loop |
No |
| Subwoofer Output |
Yes |
| Removable Power Cord |
|
| PHYSICAL SPECS |
| Height |
63.0mm (2.5") |
| Width |
200.0mm (8") |
| Depth |
215.0mm (8.5") |
| Weight |
2.05 kg (4.5 lbs) |
| Available Colors |
Gray,Silver |
| OTHER |
| Tone Controls |
No |
| Screen |
No |
| Parts Warranty |
1 Year |
| Labor Warranty |
1 Year |