Different price classes - Rotel A12 MKII costs roughly 4.1x what Audioengine N22 G2 does. Expect it to lead on paper; the question is whether you will hear the difference through the speakers you own.
| Area | Better | Why |
|---|
| Power | evenly matched | Effectively the same output - 50W against 60W into 8 ohms is under 1dB, which is not an audible difference in loudness. |
| Noise floor | B | Rotel A12 MKII is the quieter design on paper - 100dB against 90dB. Audible mainly with sensitive speakers in a quiet room. |
| Built-in DAC | evenly matched | Both have a DAC on board with much the same capability. |
| Analogue inputs | B | Rotel A12 MKII takes more analogue sources - 4 against 2. |
| Phono stage | depends | Rotel A12 MKII has a built-in phono stage (MM) and Audioengine N22 G2 does not. Decisive if you own a turntable, completely irrelevant if you do not - and an outboard phono stage is easy to add later either way. |
| Room to grow | evenly matched | The same expansion options on both. |
| Shelf space | depends | Audioengine N22 G2 takes up about 87% less shelf area (218cm² against 1633cm²), and it is 168mm shallower, which is the measurement that decides whether a rack door shuts. |
| Price | A | Audioengine N22 G2 costs less - $269 against $1,100 at list. |
| Watts per dollar | A | Audioengine N22 G2 is the cheaper watt - about $5 per watt against $18. A blunt measure, and it says nothing about how either sounds, but it is the honest one for raw output. |
A Audioengine N22 G2 B Rotel A12 MKII
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both amplifiers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
Rotel A12 MKII is ahead, but on only 1 of the measured areas, and it costs about 4.1x the price. That is a lot of money for a narrow margin - Audioengine N22 G2 is the sensible buy unless a specific feature above decides it for you. If you play records, Rotel A12 MKII saves you buying a phono stage; if you do not, ignore that row entirely. Think about the whole system: the roughly $831 saved by taking the cheaper one would buy better speakers or a subwoofer, which does more for the sound than the difference between two competent amplifiers.
What a spec sheet cannot show: how either sounds with your speakers, how the controls feel day to day, and what the app is like to live with - which is where most all-in-one amplifiers are actually won or lost. Power figures are the manufacturers' own and are not measured to a common standard, so treat small differences as noise. If you can hear both, that will tell you more than any row above.