Fyne Audio F501SP is a 3-way Passive Bass Reflex Floor-standing speaker by Fyne Audio. It was released in 2023. It features a Tweeter and x " Woofer.
High: FyneFlute surround with 25 mm magnesium dome compression tweeter
The speaker has a frequency range of 36-34k Hz and a sensitivity of 91 dB. Fyne Audio F501SP has an MSRP of 4799$ per pair.
Room Size Suitability
The size of the room where you plan to use the Fyne Audio F501SP is a crucial factor in your decision. We have assessed its suitability for various room sizes based on its dimensions and maximum power output:
| Listening Environment* |
Suitability |
| Near-field | Poor |
| Small Room | Average |
| Mid-size Room | Good |
| Large Room | Average |
| Very Large Room | Poor |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2, Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: > 400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual listening experience changes depending on floor height, room shape, surface materials, listening position, speaker locations, etc.)
**This post contains affiliate links, and we will be compensated if you make a purchase after clicking through our links. As an Amazon Associate I earn from qualifying purchases.
Frequency Response of the Fyne Audio F501SP Speaker
Fyne Audio F501SP has a Frequency response range of 36-34k Hz at ±3dB. With a minimum frequency of 36 Hz, F501SP delivers deep bass that will likely satisfy most listeners, especially those who enjoy music. However, movie enthusiasts and music fans who prefer a full range of sound may still benefit from adding a subwoofer.
Here we have a comparison of how F501SP's Low frequency value compares with the average, max and min Low frequency values in its class.
Low Frequency
Floor-standing Speakers
Thinking about a subwoofer for the Fyne Audio F501SP?
Among the speakers in our database with a max MSRP price of 5000$ (Pair), these are the 5 Passive Floor-standing speakers that have the deeper bass levels than the Fyne Audio F501SP's 36Hz:
Crossover frequency of the Fyne Audio F501SP?
The crossover points of the F501SP are set at 250 Hz, 1700 Hz.
Impedance and Sensitivity
Fyne Audio F501SP's nominal impedance level is
8 ohms and has a sensitivity of
91 dB.
Sensitivity
Floor-standing Speakers
8 Ohms is pretty much the standard nominal impedance amongst stereo speakers and amplifiers so Fyne Audio F501SP is not considered a difficult to drive speaker from nominal Impedance perspective.
Sensitivity
91dB of the Fyne Audio F501SP is considered a high sensitivity compared to average stereo speaker which makes F501SP an easy to drive from Sensitivity perspective. If you are planning to power your speaker with a Tube amp which are generally very low power, the Fyne Audio F501SP will be a good choice. Work out how loud the Fyne Audio F501SP plays in your room →
What amplifier does the Fyne Audio F501SP need?
At normal listening levels in a medium room, about
6.0–95 W
per channel into 8 ohms.
Set your own conditions and we will rank every amplifier we cover.
Prefer to browse? Integrated amplifiers under $5,000, or every amplifier we cover.
Input Type
F501SP features Binding post type connectors. Bi-amping and Bi-wiring are not possible.
Work out what gauge speaker cable this run needs →
Fyne Audio F501SP External Dimensions and Weight
Fyne Audio F501SP has external dimensions of (Height x Width x Depth) 38.7 x 11.3 x 12.7inch (983.0 x 287.0 x 322.6mm ).
Base Surface Area
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base area of Fyne Audio F501SP is approximately 925.9cm2 / 143.5inch2.
Find speakers that fit your shelf or alcove → · Work out where they should sit in the room →
WeightThe Fyne Audio F501SP weighs 21.00kg / 46.2lbs per piece. Here is a comparison of how F501SP's weight compares with the average, max and min weights in its class.
Weight
All Floor-standing Speakers
Weight
Floor-standing Speakers under $5000
Cabinet type and Materials
Fyne Audio F501SP has a
Bass Reflex type cabinet. Bass Reflex type loudspeakers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs.
Does the Fyne Audio F501SP come with a Grille?
F501SP comes with grilles. The purpose of the grille is to protect the delicate driver elements from external impacts while still allowing the sound to pass as clearly as possible.
Recommended Accessories
Here is a list of accessories that we think you may need for the Fyne Audio F501SP.
Official Product Page
Official manufacturer's product page for the Fyne Audio F501SP speaker can be found below:
Official Product Page for Fyne Audio F501SP