Emotiva Airmotiv T1+ is a 3-way Passive Bass reflex Floor-standing speaker by Emotiva. It was released in October 2022. It features a 25×32 mm" folded ribbon Tweeter, 1 x 5.25" Midrange and 2 x 6" woven fiber cone Woofer. The speaker has a frequency range of 37 Hz – 28 kHz and a sensitivity of 88 dB. Emotiva Airmotiv T1+ has an MSRP of 799$ per pair.
Room Size Suitability
The size of the room where you plan to use the Emotiva Airmotiv T1+ is a crucial factor in your decision. We have assessed its suitability for various room sizes based on its dimensions and maximum power output:
| Listening Environment* |
Suitability |
| Near-field | Bad |
| Small Room | Poor |
| Mid-size Room | Good |
| Large Room | Good |
| Very Large Room | Poor |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2, Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: > 400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual listening experience changes depending on floor height, room shape, surface materials, listening position, speaker locations, etc.)
Emotiva later replaced Airmotiv T1+ with Airmotiv XT1. Follow the link to read our in-depth comparison of these speakers:
Compare Emotiva Airmotiv T1+ vs Emotiva Airmotiv XT1
Emotiva's Airmotiv Series of Loudspeakers
Airmotiv T1+ is a member of Emotiva's Airmotiv series of Passive speakers. The Airmotiv range are Emotiva's powered studio-style speakers, known for high value and folded-ribbon tweeters. Below you can see the main specs of these speakers.
See all 9 Emotiva Airmotiv models compared »
Emotiva Airmotiv Series Speakers
Emotiva Airmotiv Series Speakers
Frequency Response of the Emotiva Airmotiv T1+ Speaker
Emotiva Airmotiv T1+ has a Frequency response range of 37 Hz – 28 kHz and Power Range of Up to 150 watts. With a minimum frequency of 37 Hz, Airmotiv T1+ delivers deep bass that will likely satisfy most listeners, especially those who enjoy music. However, movie enthusiasts and music fans who prefer a full range of sound may still benefit from adding a subwoofer.
Here we have a comparison of how Airmotiv T1+'s Low frequency value compares with the average, max and min Low frequency values in its class.
Low Frequency
Floor-standing Speakers
Thinking about a subwoofer for the Emotiva Airmotiv T1+?
Emotiva Airmotiv T1+'s woven fiber cone Woofer
Among the speakers in our database with a max MSRP price of 1000$ (Pair), there is only one Passive Floor-standing speaker that have the deeper bass levels than the Emotiva Airmotiv T1+'s 37Hz:
Emotiva Airmotiv T1+'s folded ribbon Tweeter
Crossover frequency of the Emotiva Airmotiv T1+?
Airmotiv T1+ is a 3-way speaker and its crossover frequency between the woofer and the midrange is set to 275 Hz and the crossover frequency between the midrange and the tweeter is set to 2700 Hz.
Impedance and Sensitivity
Emotiva Airmotiv T1+'s nominal impedance level is
4 ohms and has a sensitivity of
88 dB.
Sensitivity
Floor-standing Speakers
Nominal Impedance of the 4 Ohms means that the Emotiva Airmotiv T1+ is a difficult to drive speaker from nominal Impedance perspective, make sure that you choose an amplifier than can provide 4 Ohms for this speaker.
Many AVRs (audio/video receiver) in the market may have difficulty when the speakers dip below the 4 Ohms levels (this may cause clipping or even physical damage), so we recommend to not pair the Emotiva Airmotiv T1+ with an AVR but use an Integrated Amplifier instead.
Sensitivity
88dB of the Emotiva Airmotiv T1+ is an average sensitivity for stereo speaker so it is neither easy nor difficult to drive Sensitivity wise. Work out how loud the Emotiva Airmotiv T1+ plays in your room →
Running more than one pair from a single amplifier? Check the load it would present →
What amplifier does the Emotiva Airmotiv T1+ need?
At normal listening levels in a medium room, about
24–150 W
per channel into 4 ohms.
Set your own conditions and we will rank every amplifier we cover.
Prefer to browse? Integrated amplifiers under $1,000, or every amplifier we cover.
Input Type
Airmotiv T1+ has Binding post type connectors and lets bi-amping/bi-wiring. Bi-wiring can enhance the overall transparency of your loudspeakers by using separate speaker wires for the low and high-frequency drivers from a single amplifier. Bi-amping, on the other hand, involves using separate amplifiers for the high and low-frequency drivers, potentially resulting in a greater dynamic range and reduced distortion.
Work out what gauge speaker cable this run needs →
Emotiva Airmotiv T1+ Back View
Emotiva Airmotiv T1+'s Binding post terminals allows Bi-amping or bi-wiring
Emotiva Airmotiv T1+ External Dimensions and Weight
Emotiva Airmotiv T1+ has external dimensions of (Height x Width x Depth) 39-1/2 x 8-3/8 x 11-5/8inch (1004.0 x 213.0 x 296.0mm ).
Base Surface Area
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base area of Emotiva Airmotiv T1+ is approximately 630.5cm2 / 97.7inch2.
Find speakers that fit your shelf or alcove → · Work out where they should sit in the room →
WeightThe Emotiva Airmotiv T1+ weighs 18.20kg / 40lbs per piece. Here is a comparison of how Airmotiv T1+'s weight compares with the average, max and min weights in its class.
Weight
All Floor-standing Speakers
Weight
Floor-standing Speakers under $1000
How does the Emotiva Airmotiv T1+ compare to the Emotiva Airmotiv T2+?
One of the natural alternative to the Emotiva Airmotiv T1+ is the which is located one step higher in Emotiva's Passive Floor-standing selection.
Check the Detailed Comparison of Emotiva Airmotiv T1+ vs for more details.
Cabinet type and Materials
Emotiva Airmotiv T1+ has a
Bass reflex type cabinet and a HDF finish.
Speaker Feet
Emotiva Airmotiv T1+ comes with the parts below which you can use to secure your loudspeaker on the surface that you are putting on:
- Permanently attached outrigger feet with rubber pads
- detachable adjustable spikes included
It is always recommended to use some kind of feet under all types of speakers. Besides limiting the movement of the speakers, it also compensates for non-flat surfaces and limits the contact surface area of the speaker. Rubber based feet also help isolating the vibrations within certain frequency ranges.
Emotiva Airmotiv T1+ Feet
Port Position
Emotiva Airmotiv T1+ is a rear-firing port speaker so you have to make sure you leave enough space between the back of the speaker and wall or bookshelf so that it has room to breathe.
Emotiva Airmotiv T1+ Port
Available colors
Emotiva Airmotiv T1+ is available in Black.
Does the Emotiva Airmotiv T1+ come with a Grille?
Airmotiv T1+ comes with magnetic grilles in black color choices. The purpose of the grille is to protect the delicate driver elements from external impacts while still allowing the sound to pass as clearly as possible. Since the included grille of the Airmotiv T1+ is magnetic type, it is very easy to put it on and off.
Recommended Accessories
Here is a list of accessories that we think you may need for the Emotiva Airmotiv T1+.
User's Manual
For more information about how to setup, use and maintain the Emotiva Airmotiv T1+, use the direct link below to download the official manual document:
Download User Manual for Emotiva Airmotiv T1+
Official Product Page
Official manufacturer's product page for the Emotiva Airmotiv T1+ speaker can be found below:
Official Product Page for Emotiva Airmotiv T1+
Warranty
5 Years of parts warranty and 5 Years of labor warranty is generally provided by the manufacturer.