Dynaudio Evoke 10 is a 2-way Passive Bass Reflex Bookshelf speaker by Dynaudio. It features a 1.1" Tweeter and 1 x 5.5" Magnesium Silicate Polymer Woofer. The speaker has a frequency range of 47-23k Hz and a sensitivity of 84 dB. Dynaudio Evoke 10 has an MSRP of 3500$ per pair.
Room Size Suitability
The size of the room where you plan to use the Dynaudio Evoke 10 is a crucial factor in your decision. We have assessed its suitability for various room sizes based on its dimensions and maximum power output:
| Listening Environment* |
Suitability |
| Near-field | Poor |
| Small Room | Average |
| Mid-size Room | Good |
| Large Room | Average |
| Very Large Room | Poor |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2, Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: > 400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual listening experience changes depending on floor height, room shape, surface materials, listening position, speaker locations, etc.)
Dynaudio Evoke 10 Lifestyle
Dynaudio's Evoke Series of Loudspeakers
Evoke 30 is a member of Dynaudio's Evoke series of Passive speakers. Below you can see the main specs of these speakers.
Dynaudio Evoke Series Speakers
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases.
Frequency Response of the Dynaudio Evoke 10 Speaker
Dynaudio Evoke 10 has a Frequency response range of 47-23k Hz at ±3dB and Power Range of up to 160 watts. With a minimum frequency of 47 Hz, Evoke 30 delivers moderate bass depth so depending on your use case, you might want to consider adding a subwoofer to your system.
To focus on the subwoofers that are in a similar price range with Dynaudio Evoke 10, check out the Powered Subwoofers under $5000. Alternatively, find the Full list of Powered Subwoofers regardless of the price.
Here we have a comparison of how Evoke 30's Low and High frequency values compare with the average, max and min Low and High frequency values in its class.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
Among the speakers in our database with a max MSRP price of 5000$ (Pair), there is only one Passive Bookshelf speaker that have the deeper bass levels than the Dynaudio Evoke 10's 47Hz:
Crossover frequency of the Dynaudio Evoke 10?
The Crossover frequency of the Evoke 30 is set to 1400Hz. This is the threshold frequency where the higher frequency signals over this level are sent to the tweeter and the lower-frequency signals are sent to the woofer by the crossover component.
Impedance and Sensitivity
Dynaudio Evoke 10's nominal impedance level is
6 ohms and has a sensitivity of
84 dB.
Sensitivity
Bookshelf Speakers
Nominal Impedance of the 6 Ohms makes the Dynaudio Evoke 10 a relatively difficult to drive speaker compared to more frequently found 8 ohms speakers from nominal Impedance perspective.
Sensitivity
With a sensitivity level of only 84 dB, Dynaudio Evoke 10 is a difficult to drive speaker from Sensitivity perspective, make sure to choose an amplifier with a high output if you like listening to your music at high volume levels. You may especially have a hard time using Tube amplifiers which are traditionally very low power compared to Class A/B or Class D amps.
Check the amplifiers that are in a similar price range to the Dynaudio Evoke 10:
Input Type
Evoke 30 features Binding post type connectors. Bi-amping and Bi-wiring are not possible.
Dynaudio Evoke 10 Back View
Dynaudio Evoke 10 External Dimensions and Weight
Dynaudio Evoke 10 has external dimensions of (Height x Width x Depth) 12.4 x 7.1 x 10.5inch (315.0 x 180.0 x 266.0mm ).
Base Surface Area
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base area of Dynaudio Evoke 10 is approximately 478.8cm2 / 74.2inch2.
To get a better perspective on the real life size of Dynaudio Evoke 10, let's compare it with a standard size Compact Disc which has a diameter of 4.7inch (120mm).
Dynaudio Evoke 10 Speaker Size Compared to a Compact Disc
Here we place the Dynaudio Evoke 10 virtually next to a standard width amplifier and turntable on a BDI Octave Media Cabinet to get a better idea about the size.
Dynaudio Evoke 10 Speaker next to an amplifier and turntable
WeightThe Dynaudio Evoke 10 weighs 6.70kg / 14.7lbs per piece. Here is a comparison of how Evoke 30's weight compares with the average, max and min weights in its class.
Weight
All Bookshelf Speakers
Weight
Bookshelf Speakers under $5000
Dynaudio Evoke 10 - Top View
How does the Dynaudio Evoke 10 compare to the Dynaudio Evoke 20?
One of the natural alternative to the Dynaudio Evoke 10 is the Evoke 30 which is located one step higher in Dynaudio's Passive Bookshelf selection.
Here is a scaled size comparison of these two speakers to give you an idea how their external dimensions compare:
Comparison image of Dynaudio Evoke 10 and Dynaudio Evoke 20 Size and External Dimensions
Check the Detailed Comparison of Dynaudio Evoke 10 vs Evoke 30 for more details.
Cabinet type and Materials
Dynaudio Evoke 10 has a
Bass Reflex type cabinet and a MDF/Wood veneer finish. Bass Reflex type loudspeakers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs.
Port Position
Dynaudio Evoke 10 is a rear-firing port speaker so you have to make sure you leave enough space between the back of the speaker and wall or bookshelf so that it has room to breathe. Evoke 30 comes with
Foam port plug so if you don't have any choice but place the speakers too close to the walls or other surfaces, you can use these plugs in order to avoid boomy or too much bass.
Available colors
Dynaudio Evoke 10 is available in Black.
Wall Mounting
Evoke 30 doesn't sport any built-in mounting bracket, so you need an external structure to mount it on walls.
Does the Dynaudio Evoke 10 come with a Grille?
Evoke 30 comes with grilles. The purpose of the grille is to protect the delicate driver elements from external impacts while still allowing the sound to pass as clearly as possible.
Dynaudio Evoke 10 with Grille
What's in the Box of Dynaudio Evoke 10?
Here are the items that are included inside the box of Evoke 30:
Recommended Accessories
Here is a list of accessories that we think you may need for the Dynaudio Evoke 10.
- Speaker Cable and Connectors
- Vibration Isolators: IsoAcoustics isolators more affordable options too.
- Acoustic Panels and Treatments: Your room is as important as your stereo equipment so acoustic treatments goes a long way in improving the overall performance.
- Speaker Stands: Stands bring your bookshelf speakers to ideal height (rule of thumb is to have the tweeter level with your ear in your listening position), helps stability and acoustical isolation.
User's Manual
For more information about how to setup, use and maintain the Dynaudio Evoke 10, use the direct link below to download the official manual document:
Download User Manual for Dynaudio Evoke 10
Official Product Page
Official manufacturer's product page for the Dynaudio Evoke 10 speaker can be found below:
Official Product Page for Dynaudio Evoke 10
Warranty
5 Years (8 Years registered) of parts warranty and 5 Years (8 Years registered) of labor warranty is generally provided by the manufacturer.