Dynaudio Evoke 50 is a 3-way Passive Bass Reflex Floor-standing speaker by Dynaudio. It was released in 2019. It features a 1.1" Tweeter, 1 x 5.5" Midrange and 2 x 7" Magnesium Silicate Polymer Woofer. The speaker has a frequency range of 35-23k Hz and a sensitivity of 87 dB. Dynaudio Evoke 50 has an MSRP of 5000$ per pair but can often be found around 4650$ per pair.
Room Size Suitability
The size of the room where you plan to use the Dynaudio Evoke 50 is a crucial factor in your decision. We have assessed its suitability for various room sizes based on its dimensions and maximum power output:
| Listening Environment* |
Suitability |
| Near-field | Bad |
| Small Room | Poor |
| Mid-size Room | Average |
| Large Room | Good |
| Very Large Room | Average |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2, Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: > 400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual listening experience changes depending on floor height, room shape, surface materials, listening position, speaker locations, etc.)
Dynaudio Evoke 50 Lifestyle
Dynaudio's Evoke Series of Loudspeakers
Evoke 50 is a member of Dynaudio's Evoke series of Passive speakers. The Evoke range is Dynaudio's mid-tier line, using Cerotar tweeter and Esotar-derived technology for a refined sound. Below you can see the main specs of these speakers.
See all 5 Dynaudio Evoke models compared »
Dynaudio Evoke Series Speakers
Frequency Response of the Dynaudio Evoke 50 Speaker
Dynaudio Evoke 50 has a Frequency response range of 35-23k Hz and Power Range of up to 260 watts. With a minimum frequency of 35 Hz, Evoke 50 delivers deep bass that will likely satisfy most listeners, especially those who enjoy music. However, movie enthusiasts and music fans who prefer a full range of sound may still benefit from adding a subwoofer.
Here we have a comparison of how Evoke 50's Low frequency value compares with the average, max and min Low frequency values in its class.
Low Frequency
Floor-standing Speakers
Thinking about a subwoofer for the Dynaudio Evoke 50?
Among the speakers in our database with a max MSRP price of 5000$ (Pair), these are the 5 Passive Floor-standing speakers that have the deeper bass levels than the Dynaudio Evoke 50's 35Hz:
Crossover frequency of the Dynaudio Evoke 50?
Evoke 50 is a 3-way speaker and its crossover frequency between the woofer and the midrange is set to 430 Hz and the crossover frequency between the midrange and the tweeter is set to 3500 Hz.
Impedance and Sensitivity
Dynaudio Evoke 50's nominal impedance level is
4 ohms and has a sensitivity of
87 dB.
Sensitivity
Floor-standing Speakers
Nominal Impedance of the 4 Ohms means that the Dynaudio Evoke 50 is a difficult to drive speaker from nominal Impedance perspective, make sure that you choose an amplifier than can provide 4 Ohms for this speaker.
Many AVRs (audio/video receiver) in the market may have difficulty when the speakers dip below the 4 Ohms levels (this may cause clipping or even physical damage), so we recommend to not pair the Dynaudio Evoke 50 with an AVR but use an Integrated Amplifier instead.
Sensitivity
With a sensitivity level of only 87 dB, Dynaudio Evoke 50 is a difficult to drive speaker from Sensitivity perspective, make sure to choose an amplifier with a high output if you like listening to your music at high volume levels. You may especially have a hard time using Tube amplifiers which are traditionally very low power compared to Class A/B or Class D amps. Work out how loud the Dynaudio Evoke 50 plays in your room →
Running more than one pair from a single amplifier? Check the load it would present →
What amplifier does the Dynaudio Evoke 50 need?
At normal listening levels in a medium room, about
30–260 W
per channel into 4 ohms.
Set your own conditions and we will rank every amplifier we cover.
Prefer to browse? Integrated amplifiers under $5,000, or every amplifier we cover.
Input Type
Evoke 50 features Binding post type connectors. Bi-amping and Bi-wiring are not possible.
Work out what gauge speaker cable this run needs →
Dynaudio Evoke 50 Back View
Dynaudio Evoke 50 External Dimensions and Weight
Dynaudio Evoke 50 has external dimensions of (Height x Width x Depth) 45-7/8 x 12-1/16 x 14-3/4inch (1162.0 x 305.0 x 373.0mm ).
Base Surface Area
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base area of Dynaudio Evoke 50 is approximately 1137.7cm2 / 176.3inch2.
To get a better perspective on the real life size of Dynaudio Evoke 50, let's compare it with a standard size Compact Disc which has a diameter of 4.7inch (120mm).
Dynaudio Evoke 50 Speaker Size Compared to a Compact Disc
Here we place the Dynaudio Evoke 50 virtually next to a standard width amplifier and turntable on a media center to get a better idea about the size.
Dynaudio Evoke 50 Floor-standing Speaker next to a Media Stand
Find speakers that fit your shelf or alcove → · Work out where they should sit in the room →
WeightThe Dynaudio Evoke 50 weighs 26.90kg / 59.2lbs per piece. Here is a comparison of how Evoke 50's weight compares with the average, max and min weights in its class.
Weight
All Floor-standing Speakers
Weight
Floor-standing Speakers under $5000
Dynaudio Evoke 50 - Top View
Cabinet type and Materials
Dynaudio Evoke 50 has a
Bass Reflex type cabinet and a MDF/Wood veneer finish. Bass Reflex type loudspeakers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs.
Speaker Feet
Dynaudio Evoke 50 comes with the parts below which you can use to secure your loudspeaker on the surface that you are putting on:
It is always recommended to use some kind of feet under all types of speakers. Besides limiting the movement of the speakers, it also compensates for non-flat surfaces and limits the contact surface area of the speaker. Rubber based feet also help isolating the vibrations within certain frequency ranges.
Port Position
Dynaudio Evoke 50 is a rear-firing port speaker so you have to make sure you leave enough space between the back of the speaker and wall or bookshelf so that it has room to breathe. Evoke 50 comes with
Foam port plug so if you don't have any choice but place the speakers too close to the walls or other surfaces, you can use these plugs in order to avoid boomy or too much bass.
Available colors
Dynaudio Evoke 50 is available in Oak (blonde).
Does the Dynaudio Evoke 50 come with a Grille?
Evoke 50 comes with grilles. The purpose of the grille is to protect the delicate driver elements from external impacts while still allowing the sound to pass as clearly as possible.
Dynaudio Evoke 50 with Grille
What's in the Box of Dynaudio Evoke 50?
Here are the items that are included inside the box of Evoke 50:
- Floorstanding loudspeaker
- Grille
- 4 Outrigger feet
- 4 Spikes
- 4 Locking nuts
- 8 Washers
- 8 Screws
- Foam port plug
- Hex-key
- Tweeter protection cover (pre-installed)
- Instructions for Use
- Important Safety Instructions
- Warranty Card
Recommended Accessories
Here is a list of accessories that we think you may need for the Dynaudio Evoke 50.
User's Manual
For more information about how to setup, use and maintain the Dynaudio Evoke 50, use the direct link below to download the official manual document:
Download User Manual for Dynaudio Evoke 50
Official Product Page
Official manufacturer's product page for the Dynaudio Evoke 50 speaker can be found below:
Official Product Page for Dynaudio Evoke 50
Warranty
5 Years (8 Years registered) of parts warranty and 5 Years (8 Years registered) of labor warranty is generally provided by the manufacturer.