Dynaudio Evoke 20 is a 2-way Passive Bass Reflex Bookshelf speaker by Dynaudio. It was released in 2019. It features a 1.1" Tweeter and 1 x 7" Magnesium Silicate Polymer Woofer. The speaker has a frequency range of 40-23k Hz and a sensitivity of 86 dB. Dynaudio Evoke 20 has an MSRP of 4798$ per pair.
Room Size Suitability
The size of the room where you plan to use the Dynaudio Evoke 20 is a crucial factor in your decision. We have assessed its suitability for various room sizes based on its dimensions and maximum power output:
| Listening Environment* |
Suitability |
| Near-field | Poor |
| Small Room | Average |
| Mid-size Room | Good |
| Large Room | Average |
| Very Large Room | Poor |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2, Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: > 400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual listening experience changes depending on floor height, room shape, surface materials, listening position, speaker locations, etc.)
Dynaudio Evoke 20 Lifestyle
Dynaudio's Evoke Series of Loudspeakers
Evoke 30 is a member of Dynaudio's Evoke series of Passive speakers. The Evoke range is Dynaudio's mid-tier line, using Cerotar tweeter and Esotar-derived technology for a refined sound. Below you can see the main specs of these speakers.
See all 5 Dynaudio Evoke models compared »
Dynaudio Evoke Series Speakers
Frequency Response of the Dynaudio Evoke 20 Speaker
Dynaudio Evoke 20 has a Frequency response range of 40-23k Hz and Power Range of up to 180 watts. With a minimum frequency of 40 Hz, Evoke 30 delivers deep bass that will likely satisfy most listeners, especially those who enjoy music. However, movie enthusiasts and music fans who prefer a full range of sound may still benefit from adding a subwoofer.
Here we have a comparison of how Evoke 30's Low frequency value compares with the average, max and min Low frequency values in its class.
Low Frequency
Bookshelf Speakers
Thinking about a subwoofer for the Dynaudio Evoke 20?
Crossover frequency of the Dynaudio Evoke 20?
The crossover frequency of the Evoke 30 is set to 3200Hz. This is the threshold frequency where the higher frequency signals over this level are sent to the tweeter and the lower-frequency signals are sent to the woofer by the crossover component.
Impedance and Sensitivity
Dynaudio Evoke 20's nominal impedance level is
6 ohms and has a sensitivity of
86 dB.
Sensitivity
Bookshelf Speakers
Nominal Impedance of the 6 Ohms makes the Dynaudio Evoke 20 a relatively difficult to drive speaker compared to more frequently found 8 ohms speakers from nominal Impedance perspective.
Sensitivity
With a sensitivity level of only 86 dB, Dynaudio Evoke 20 is a difficult to drive speaker from Sensitivity perspective, make sure to choose an amplifier with a high output if you like listening to your music at high volume levels. You may especially have a hard time using Tube amplifiers which are traditionally very low power compared to Class A/B or Class D amps. Work out how loud the Dynaudio Evoke 20 plays in your room →
Running more than one pair from a single amplifier? Check the load it would present →
What amplifier does the Dynaudio Evoke 20 need?
At normal listening levels in a medium room, about
25–180 W
per channel into 6 ohms.
Set your own conditions and we will rank every amplifier we cover.
Prefer to browse? Integrated amplifiers under $5,000, or every amplifier we cover.
Input Type
Evoke 30 features Binding post type connectors. Bi-amping and Bi-wiring are not possible.
Work out what gauge speaker cable this run needs →
Dynaudio Evoke 20 Back View
Dynaudio Evoke 20 External Dimensions and Weight
Dynaudio Evoke 20 has external dimensions of (Height x Width x Depth) 15 x 8.5 x 12.1inch (380.0 x 215.0 x 317.0mm ).
Base Surface Area
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base area of Dynaudio Evoke 20 is approximately 681.6cm2 / 105.6inch2.
To get a better perspective on the real life size of Dynaudio Evoke 20, let's compare it with a standard size Compact Disc which has a diameter of 4.7inch (120mm).
Dynaudio Evoke 20 Speaker Size Compared to a Compact Disc
Here we place the Dynaudio Evoke 20 virtually next to a standard width amplifier and turntable on a BDI Octave Media Cabinet to get a better idea about the size.
Dynaudio Evoke 20 Speaker next to an amplifier and turntable
Find speakers that fit your shelf or alcove → · Work out where they should sit in the room →
WeightThe Dynaudio Evoke 20 weighs 9.90kg / 21.8lbs per piece. Here is a comparison of how Evoke 30's weight compares with the average, max and min weights in its class.
Weight
All Bookshelf Speakers
Weight
Bookshelf Speakers under $5000
Dynaudio Evoke 20 - Top View
Cabinet type and Materials
Dynaudio Evoke 20 has a
Bass Reflex type cabinet and a MDF/Wood veneer finish. Bass Reflex type loudspeakers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs.
Port Position
Dynaudio Evoke 20 is a rear-firing port speaker so you have to make sure you leave enough space between the back of the speaker and wall or bookshelf so that it has room to breathe. Evoke 30 comes with
Foam port plug so if you don't have any choice but place the speakers too close to the walls or other surfaces, you can use these plugs in order to avoid boomy or too much bass.
Available colors
Dynaudio Evoke 20 is available in Black.
Wall Mounting
Evoke 30 doesn't sport any built-in mounting bracket, so you need an external structure to mount it on walls.
Does the Dynaudio Evoke 20 come with a Grille?
Evoke 30 comes with grilles. The purpose of the grille is to protect the delicate driver elements from external impacts while still allowing the sound to pass as clearly as possible.
Dynaudio Evoke 20 with Grille
What's in the Box of Dynaudio Evoke 20?
Here are the items that are included inside the box of Evoke 30:
Recommended Accessories
Here is a list of accessories that we think you may need for the Dynaudio Evoke 20.
- Speaker Cable and Connectors
- Vibration Isolators: IsoAcoustics isolators are our favorite isolators but you may find more affordable options too.
- Acoustic Panels and Treatments: Your room is as important as your stereo equipment so acoustic treatments goes a long way in improving the overall performance.
- Speaker Stands: Stands bring your bookshelf speakers to ideal height (rule of thumb is to have the tweeter level with your ear in your listening position), helps stability and acoustical isolation.
User's Manual
For more information about how to setup, use and maintain the Dynaudio Evoke 20, use the direct link below to download the official manual document:
Download User Manual for Dynaudio Evoke 20
Official Product Page
Official manufacturer's product page for the Dynaudio Evoke 20 speaker can be found below:
Official Product Page for Dynaudio Evoke 20
Warranty
5 Years (8 Years registered) of parts warranty and 5 Years (8 Years registered) of labor warranty is generally provided by the manufacturer.