In this review, we will be comparing Evoke 30 and R3, two Passive Bookshelf speakers from Dynaudio and KEF. Let's have a brief look at the main features
of Dynaudio Evoke 10 and KEF R3 first before getting into our more
detailed comparison.
What size room are the Dynaudio Evoke 10 and KEF R3 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Dynaudio Evoke 10 and KEF R3 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
One of the fundamental differences between these two speakers is that Evoke 30 is a 2-way design whereas the R3 is a 3-way speaker. 3-way designs utilize a midrange driver in addition to the tweeter and woofer on 2-way designs. Designing a crossover for a 3-way speaker is a complicated process and generally increases the overall cost of the speaker.
| Driver |
Dynaudio Evoke 10 |
KEF R3 |
|
Driver Setup
|
2-way
|
3-way
|
|
Tweeter
|
1.1-inch
|
1-inch
|
|
Midrange
|
- |
1 x 5-inch |
|
Woofer
|
1 x 5.5-inch
|
1 x 6.5-inch
|
Evoke 30 features a 1.1" Cerotar with Hexis Tweeter and 1 x 5.5" Magnesium Silicate Polymer Woofer with a Crossover frequency at 1400Hz. On the other hand, the R3 features a 1" aluminum Dome Tweeter , a 5" Midrange and 1 x 6.5" Hybrid aluminum Woofer with a Crossover frequency at 400Hz and 2900Hz.
Frequency Response
Evoke 30 has a frequency range of 47-23k Hz whereas R3 has a frequency range of 52-28k Hz. With a minimum frequency of 47Hz, the Evoke 30 can go significantly deeper on the low side and provide stronger bass compared to the R3's min frequency of 52Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Evoke 30 is a 6 ohms speaker compared to the R3 which has a nominal impedance of 8 ohms.
These two speakers also have different sensitivity levels. Evoke 30 sensitivity is rated at 84 dB and the R3's is rated at 87 dB. This 3 dB difference makes the KEF R3 a more sensitive speaker compared to Dynaudio Evoke 10, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Evoke 30 can handle a max power of 180 watts RMS from the amp the whereas Evoke 30 has a max power handling value of 160 watts RMS , 20 watts less than the R3.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
R3 features Binding post posts which make bi-amping or bi-wiring possible. Evoke 30 has a Binding post which doesn't feature bi-amping/bi-wiring.
Dynaudio Evoke 10's Binding post terminals
Cabinet Type and Port Position
Both Evoke 30 and R3 have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
KEF R3 Port
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Dynaudio Evoke 10's and KEF R3's external dimensions. Dynaudio Evoke 10 has external dimensions of 315.0 x 180.0 x 266.0mm ( 12.4 x 7.1 x 10.5inch) whereas KEF R3 has external dimensions of 423.0 x 199.0 x 337.0mm ( 16-5/8 x 7-13/16 x 13-1/4inch) .
KEF R3 is clearly the larger of the two speakers. Its body is 19mm wider, 108mm taller and 71mm deeper than Dynaudio Evoke 10.
Below you can see the front view size comparison of Dynaudio Evoke 10 and KEF R3 in scale.
Comparison image of Dynaudio Evoke 10 and KEF R3 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Dynaudio Evoke 10 is approximately 478.8cm2 / 74.2inch2 and base area of the KEF R3 is approximately 670.6cm2 / 103.9inch2. The Evoke 30 requires 29% less surface area than the R3 which gives it a small advantage on placement in tight spaces.
Here is an another comparison that shows both speakers on a BDI Octave Media Cabinet, next to a standard size amplifier and turntable in scale:
Size Comparison image of Dynaudio Evoke 10 and KEF R3 on a Media Console
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Dynaudio Evoke 10 weighs 6.70kg / 14.7lbs and the KEF R3 weighs 13.55kg / 29.8lbs. This makes the R3 102% heavier than the Evoke 30.
Here is a comparison of how Evoke 30 and R3's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of Dynaudio Evoke 10?
Here are the items that are included inside the box of Evoke 30:
What's in the Box of KEF R3?
Here are the items that come with the R3:
2 Bookshelf loudspeakers2 Grilles2 Foam port plugs8 Self-adhesive rubber feetUser ManualWarranty Information
 Low Frequency Response |
47 Hz
vs
52 Hz
|
Generates deeper bass |
 Height |
315mm
vs
423mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
478cm2 (180x266mm)
vs
670cm2 (199x337mm)
|
Takes less floor space |
 Max Input Power |
180 watts
vs
160 watts
|
Handle more power from your amplifier |
 Driver Setup |
3-way
vs
2-way
|
Have a dedicated mid-range driver |
 Sensitivity |
87 dB
vs
84 dB
|
Play louder with same amount of amplification power |
 Nominal Impedance |
8 ohms
vs
6 ohms
|
Less selective with amplifiers |
| Woofer Size |
6.5 inches
vs
5.5 inches
|
Larger woofer |
 High Frequency Response |
28k Hz
vs
23k Hz
|
Generates higher frequency |
 Bi-Amping and Bi-Wiring |
Yes
vs
No
|
Allows bi-amping and bi-wiring connections |
 Price per pair* |
2200USD
vs
3500USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
Dynaudio Evoke 10 |
KEF R3 |
| Brand |
Dynaudio |
KEF |
| Speaker Type |
Floor-standing speaker |
Bookshelf speakers |
| Power Range |
up to 160 watts |
15-180 watts |
| Sensitivity |
84 dB |
87 dB |
| Impedance |
6 ohms |
8 ohms |
| Impedance |
n/a |
3.2 ohms |
| Frequency Response |
47-23k Hz |
52-28k Hz |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
5.5" |
6.5" |
| Woofer Composition |
Magnesium Silicate Polymer |
Hybrid aluminum |
| Woofer Surround Material |
Rubber |
Rubber |
| Tweeter Size |
1.1" |
1" |
| Tweeter Type |
n/a |
Dome |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
5" |
| Crossover Frequency |
1400Hz |
400Hz and 2900Hz |
| Firing Direction |
rear |
rear |
Physical Specs |
|
|
| Height |
315.0mm (12.4") |
423.0mm (16.7") |
| Width |
180.0mm (7.1") |
199.0mm (7.8") |
| Depth |
266.0mm (10.5") |
337.0mm (13.3") |
| Weight |
6.70kg (14.7lbs) |
13.55kg (29.8lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
MDF/Wood veneer |
MDF/Lacquer |
| Available Colors |
Black |
Black Gloss, White Gloss, Walnut |
| Mounting Bracket |
No |
No |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
No |
Yes |
Other |
|
|
| Parts Warranty |
5 Years (8 Years registered) |
5 Years |
| Labor Warranty |
5 Years (8 Years registered) |
5 Years |