In this review, we will be comparing 707 S3 and Evoke 30, two Passive Bookshelf speakers from Bowers Wilkins and Dynaudio. Let's have a brief look at the main features
of B&W 707 S3 and Dynaudio Evoke 10 first before getting into our more
detailed comparison.
What size room are the B&W 707 S3 and Dynaudio Evoke 10 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the B&W 707 S3 and Dynaudio Evoke 10 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both 707 S3 and Evoke 30 are 2-way speakers.
| Driver |
B&W 707 S3 |
Dynaudio Evoke 10 |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1.1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 5-inch
|
1 x 5.5-inch
|
707 S3 features a 1" Decoupled Carbon Dome Tweeter and 1 x 5" Continuum Woofer . On the other hand, the Evoke 30 features a 1.1" Cerotar with Hexis Tweeter and 1 x 5.5" Magnesium Silicate Polymer Woofer with a Crossover frequency at 1400Hz.
Frequency Response
707 S3 has a frequency range of 50-28k Hz whereas Evoke 30 has a frequency range of 47-23k Hz. With a minimum frequency of 47Hz, the Evoke 30 can go slightly deeper then the 707 S3's min frequency of 50Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
707 S3 is a 8 ohms speaker compared to the Evoke 30 which has a nominal impedance of 6 ohms.
On the other hand, they have the same sensitivity of 84 dBdB.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
707 S3 can handle a max power of 160 watts RMS from the amp the whereas 707 S3 has a max power handling value of 100 watts RMS , 60 watts less than the Evoke 30.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
707 S3 features Binding post posts which make bi-amping or bi-wiring possible. Evoke 30 has a Binding post which doesn't feature bi-amping/bi-wiring.
B&W 707 S3's Binding post terminals allows Bi-amping or bi-wiring
Dynaudio Evoke 10's Binding post terminals
Cabinet Type and Port Position
Both 707 S3 and Evoke 30 have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare B&W 707 S3's and Dynaudio Evoke 10's external dimensions. B&W 707 S3 has external dimensions of 300.0 x 165.0 x 284.0mm ( 1.8-inch x 6.5-inch x 11.2-inch) whereas Dynaudio Evoke 10 has external dimensions of 315.0 x 180.0 x 266.0mm ( 12.4 x 7.1 x 10.5inch) .
B&W 707 S3 is 15mm narrower and 15mm shorter than Dynaudio Evoke 10 but it is also 18mm deeper.
Below you can see the front view size comparison of B&W 707 S3 and Dynaudio Evoke 10 in scale.
Comparison image of B&W 707 S3 and Dynaudio Evoke 10 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the B&W 707 S3 is approximately 468.6cm2 / 72.6inch2 and base area of the Dynaudio Evoke 10 is approximately 478.8cm2 / 74.2inch2. The 707 S3 requires 2% less surface area than the Evoke 30 which gives it a small advantage on placement in tight spaces.
Here is an another comparison that shows both speakers on a BDI Octave Media Cabinet, next to a standard size amplifier and turntable in scale:
Size Comparison image of B&W 707 S3 and Dynaudio Evoke 10 on a Media Console
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The B&W 707 S3 weighs 6.16kg / 13.6lbs and the Dynaudio Evoke 10 weighs 6.70kg / 14.7lbs. This makes the Evoke 30 9% heavier than the 707 S3.
Here is a comparison of how 707 S3 and Evoke 30's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of B&W 707 S3?
Here are the items that are included inside the box of 707 S3:
2 Bookshelf loudspeakers2 Grilles2 Two-piece foam port plugs8 Self-adhesive rubber feet4 Jumper-straps Manual Bowers & Wilkins brochureWarranty Information
What's in the Box of Dynaudio Evoke 10?
Here are the items that come with the Evoke 30:
 Nominal Impedance |
8 ohms
vs
6 ohms
|
Less selective with amplifiers |
 High Frequency Response |
28k Hz
vs
23k Hz
|
Generates higher frequency |
 Bi-Amping and Bi-Wiring |
Yes
vs
No
|
Allows bi-amping and bi-wiring connections |
 Height |
300mm
vs
315mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
468cm2 (165x284mm)
vs
478cm2 (180x266mm)
|
Takes less floor space |
 Price per pair* |
1799USD
vs
3500USD
|
costs less (*prices may change depending on the seller, location and time) |
 Max Input Power |
160 watts
vs
100 watts
|
Handle more power from your amplifier |
 Woofer Size |
5.5 inches
vs
5 inches
|
Larger woofer |
| Low Frequency Response |
47 Hz
vs
50 Hz
|
Generates deeper bass |
| General |
Bowers & Wilkins 707 S3 |
Dynaudio Evoke 10 |
| Brand |
Bowers Wilkins |
Dynaudio |
| Speaker Type |
Bookshelf speakers |
Floor-standing speaker |
| Power Range |
30-100 watts |
up to 160 watts |
| Sensitivity |
84 dB |
84 dB |
| Impedance |
8 ohms |
6 ohms |
| Impedance |
4.0 ohms |
n/a |
| Frequency Response |
50-28k Hz |
47-23k Hz |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
5" |
5.5" |
| Woofer Composition |
Continuum |
Magnesium Silicate Polymer |
| Woofer Surround Material |
Rubber |
Rubber |
| Tweeter Size |
1" |
1.1" |
| Tweeter Type |
Decoupled Carbon Dome |
n/a |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
n/a |
1400Hz |
| Firing Direction |
rear |
rear |
Physical Specs |
|
|
| Height |
300.0mm (11.8") |
315.0mm (12.4") |
| Width |
165.0mm (6.5") |
180.0mm (7.1") |
| Depth |
284.0mm (11.2") |
266.0mm (10.5") |
| Weight |
6.16kg (13.6lbs) |
6.70kg (14.7lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
MDF/Wood veneer |
MDF/Wood veneer |
| Available Colors |
Gloss Black,Satin White,Mocha,Rosenut |
Black |
| Mounting Bracket |
No |
No |
| Recommended Stand Height |
24-26" |
n/a |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
Yes |
No |
Other |
|
|
| Parts Warranty |
5 Years |
5 Years (8 Years registered) |
| Labor Warranty |
5 Years |
5 Years (8 Years registered) |