Acoustic Energy AE320 Mark II is a 3-way Passive Bass Reflex Floor-standing speaker by Acoustic Energy. It was released in June 2025. It features a 1.1" Dome Tweeter, 1 x 5" Midrange and 2 x 6.5" paper/coconut-fibre cone Woofer.
Three-way tower built on the driver array of the flagship Corinium: a soft dome tweeter, a 125 mm paper/coconut-fibre midrange and two 165 mm bass drivers (the US distributor's page says 120 mm and 140 mm; the maker's figures are used). Rear slot port. 1,050 mm tall, 1,070 mm on spikes.
The speaker has a frequency range of 30-29k Hz and a sensitivity of 92 dB. AE320 Mark II has an MSRP of 3199$ per pair.
Room Size Suitability
The size of the room where you plan to use the AE320 Mark II is a crucial factor in your decision. We have assessed its suitability for various room sizes based on its dimensions and maximum power output:
| Listening Environment* |
Suitability |
| Near-field | Bad |
| Small Room | Poor |
| Mid-size Room | Average |
| Large Room | Good |
| Very Large Room | Average |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2, Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: > 400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual listening experience changes depending on floor height, room shape, surface materials, listening position, speaker locations, etc.)
Acoustic Energy replaced the older AE320 with this model. Follow the link to read our detailed comparison of these models:
Compare AE320 Mark II vs AE320
Acoustic Energy's AE300 Mark II Series of Loudspeakers
AE320 Mark II is a member of Acoustic Energy's AE300 Mark II series of Passive speakers. Below you can see the main specs of these speakers.
See all 4 Acoustic Energy AE300 Mark II models compared »
Acoustic Energy AE300 Mark II Series Speakers
Frequency Response of the AE320 Mark II Speaker
AE320 Mark II has a Frequency response range of 30-29k Hz and Power Range of up to 200 watts. With a minimum frequency of 30 Hz, AE320 Mark II delivers deep bass that will likely satisfy most listeners, especially those who enjoy music. However, movie enthusiasts and music fans who prefer a full range of sound may still benefit from adding a subwoofer.
Here we have a comparison of how AE320 Mark II's Low frequency value compares with the average, max and min Low frequency values in its class.
Low Frequency
Floor-standing Speakers
Thinking about a subwoofer for the AE320 Mark II?
Among the speakers in our database priced under $5,000 a pair, these are the 5 Passive Floor-standing speakers that have deeper bass than the AE320 Mark II's 30Hz:
Crossover frequency of the AE320 Mark II?
AE320 Mark II is a 3-way speaker and its crossover frequency between the woofer and the midrange is set to 240 Hz and the crossover frequency between the midrange and the tweeter is set to 2800 Hz.
Impedance and Sensitivity
AE320 Mark II's nominal impedance level is
6 ohms and has a sensitivity of
92 dB.
Sensitivity
Floor-standing Speakers
Nominal Impedance of the 6 Ohms makes the Acoustic Energy AE320 Mark II a relatively difficult to drive speaker compared to more frequently found 8 ohms speakers from nominal Impedance perspective.
Sensitivity
92dB of the Acoustic Energy AE320 Mark II is considered a high sensitivity compared to average stereo speaker which makes AE320 Mark II an easy to drive from Sensitivity perspective. If you are planning to power your speaker with a Tube amp which are generally very low power, the AE320 Mark II will be a good choice. Work out how loud the AE320 Mark II plays in your room →
Running more than one pair from a single amplifier? Check the load it would present →
What amplifier does the AE320 Mark II need?
At normal listening levels in a medium room, about
6.3–100 W
per channel into 6 ohms.
Set your own conditions and we will rank every amplifier we cover.
Prefer to browse? Integrated amplifiers under $5,000, or every amplifier we cover.
Input Type
AE320 Mark II features type connectors.
AE320 Mark II External Dimensions and Weight
AE320 Mark II has external dimensions of (Height x Width x Depth) 41.3 x 7.9 x 13.8inch (1050.0 x 200.0 x 350.0mm ).
Base Surface Area
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base area of AE320 Mark II is approximately 700.0cm2 / 108.5inch2.
Millimetres are hard to picture, so here is the AE320 Mark II drawn to scale next to the AE309 Mark II, the speaker our readers compare it with most often.
Size, drawn to scale
Both speakers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same surface and pushed back to the same wall, so the deeper one visibly sticks out further.
AE320 Mark II needs about 53% more floor or shelf area. AE320 Mark II is 80mm deeper, so it stands that much further out from the wall. AE320 Mark II is 150mm taller.
Full comparison: AE320 Mark II vs AE309 Mark II ›
Find speakers that fit your shelf or alcove → · Work out where they should sit in the room →
WeightThe AE320 Mark II weighs 26.00kg / 57.2lbs per piece. Here is a comparison of how AE320 Mark II's weight compares with the average, max and min weights in its class.
Weight
All Floor-standing Speakers
Weight
Floor-standing Speakers under $5,000
Cabinet type and Materials
AE320 Mark II has a
Bass Reflex type cabinet and a 18 mm RSC constrained-layer MDF/bitumen finish. Bass Reflex type loudspeakers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs.
Port Position
AE320 Mark II is a rear-firing port speaker so you have to make sure you leave enough space between the back of the speaker and wall or bookshelf so that it has room to breathe.
Available colors
AE320 Mark II is available in Walnut, Silk-Touch Matte Black and Silk-Touch Matte White.
Does the AE320 Mark II come with a Grille?
AE320 Mark II comes with magnetic grilles. The purpose of the grille is to protect the delicate driver elements from external impacts while still allowing the sound to pass as clearly as possible. Since the included grille of the AE320 Mark II is magnetic type, it is very easy to put it on and off.
Recommended Accessories
Here is a list of accessories that we think you may need for the Acoustic Energy AE320 Mark II.
Official Product Page
Official manufacturer's product page for the Acoustic Energy AE320 Mark II speaker can be found below:
Official Product Page for AE320 Mark II