Acoustic Energy AE300 Mark II is a 2-way Passive Bass Reflex Bookshelf speaker by Acoustic Energy. It was released in February 2025. It features a 1.1" Dome Tweeter and 1 x 5" paper cone Woofer.
The second-generation 300 Series, a new design rather than an update: a 29 mm fabric dome replaces the old aluminium tweeter and a 125 mm (5-inch) paper cone replaces the ceramic/aluminium sandwich. 18 mm RSC constrained-layer cabinet with a rear slot port. Crossover 3.5 kHz.
The speaker has a frequency range of 42-29k Hz and a sensitivity of 86 dB. AE300 Mark II has an MSRP of 1199$ per pair.
Room Size Suitability
The size of the room where you plan to use the AE300 Mark II is a crucial factor in your decision. We have assessed its suitability for various room sizes based on its dimensions and maximum power output:
| Listening Environment* |
Suitability |
| Near-field | Average |
| Small Room | Good |
| Mid-size Room | Average |
| Large Room | Poor |
| Very Large Room | Bad |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2, Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: > 400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual listening experience changes depending on floor height, room shape, surface materials, listening position, speaker locations, etc.)
Acoustic Energy replaced the older AE300 with this model. Follow the link to read our detailed comparison of these models:
Compare AE300 Mark II vs AE300
Acoustic Energy's AE300 Mark II Series of Loudspeakers
AE300 Mark II is a member of Acoustic Energy's AE300 Mark II series of Passive speakers. Below you can see the main specs of these speakers.
See all 4 Acoustic Energy AE300 Mark II models compared »
Acoustic Energy AE300 Mark II Series Speakers
Frequency Response of the AE300 Mark II Speaker
AE300 Mark II has a Frequency response range of 42-29k Hz and Power Range of up to 120 watts. With a minimum frequency of 42 Hz, AE300 Mark II delivers deep bass that will likely satisfy most listeners, especially those who enjoy music. However, movie enthusiasts and music fans who prefer a full range of sound may still benefit from adding a subwoofer.
Here we have a comparison of how AE300 Mark II's Low frequency value compares with the average, max and min Low frequency values in its class.
Low Frequency
Bookshelf Speakers
Thinking about a subwoofer for the AE300 Mark II?
Crossover frequency of the AE300 Mark II?
The crossover frequency of the AE300 Mark II is set to 3.5kHz. This is the threshold frequency where the higher frequency signals over this level are sent to the tweeter and the lower-frequency signals are sent to the woofer by the crossover component.
Impedance and Sensitivity
AE300 Mark II's nominal impedance level is
6 ohms and has a sensitivity of
86 dB.
Sensitivity
Bookshelf Speakers
Nominal Impedance of the 6 Ohms makes the Acoustic Energy AE300 Mark II a relatively difficult to drive speaker compared to more frequently found 8 ohms speakers from nominal Impedance perspective.
Sensitivity
With a sensitivity level of only 86 dB, Acoustic Energy AE300 Mark II is a difficult to drive speaker from Sensitivity perspective, make sure to choose an amplifier with a high output if you like listening to your music at high volume levels. You may especially have a hard time using Tube amplifiers which are traditionally very low power compared to Class A/B or Class D amps. Work out how loud the AE300 Mark II plays in your room →
Running more than one pair from a single amplifier? Check the load it would present →
What amplifier does the AE300 Mark II need?
At normal listening levels in a medium room, about
25–120 W
per channel into 6 ohms.
Set your own conditions and we will rank every amplifier we cover.
Prefer to browse? Integrated amplifiers under $1,500, or every amplifier we cover.
Input Type
AE300 Mark II features type connectors.
AE300 Mark II External Dimensions and Weight
AE300 Mark II has external dimensions of (Height x Width x Depth) 12.6 x 6.7 x 10.6inch (320.0 x 170.0 x 270.0mm ).
Base Surface Area
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base area of AE300 Mark II is approximately 459.0cm2 / 71.1inch2.
Millimetres are hard to picture, so here is the AE300 Mark II drawn to scale next to the KEF LS50 Meta, the speaker our readers compare it with most often.
Size, drawn to scale
Both speakers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same surface and pushed back to the same wall, so the deeper one visibly sticks out further.
KEF LS50 Meta needs about 23% more floor or shelf area. AE300 Mark II is 17mm taller.
Full comparison: AE300 Mark II vs KEF LS50 Meta ›
Find speakers that fit your shelf or alcove → · Work out where they should sit in the room →
WeightThe AE300 Mark II weighs 7.00kg / 15.4lbs per piece. Here is a comparison of how AE300 Mark II's weight compares with the average, max and min weights in its class.
Weight
All Bookshelf Speakers
Weight
Bookshelf Speakers under $1,500
How does the AE300 Mark II compare to the Acoustic Energy AE309 Mark II?
One of the natural alternative to the AE300 Mark II is the AE309 Mark II which is located one step higher in Acoustic Energy's Passive Bookshelf selection.
Check the Detailed Comparison of AE300 Mark II vs AE309 Mark II for more details.
Cabinet type and Materials
AE300 Mark II has a
Bass Reflex type cabinet and a 18 mm RSC constrained-layer MDF/bitumen finish. Bass Reflex type loudspeakers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs.
Port Position
AE300 Mark II is a rear-firing port speaker so you have to make sure you leave enough space between the back of the speaker and wall or bookshelf so that it has room to breathe.
Available colors
AE300 Mark II is available in Walnut, Silk-Touch Matte Black and Silk-Touch Matte White.
Wall Mounting
AE300 Mark II doesn't sport any built-in mounting bracket, so you need an external structure to mount it on walls.
Does the AE300 Mark II come with a Grille?
AE300 Mark II comes with magnetic grilles. The purpose of the grille is to protect the delicate driver elements from external impacts while still allowing the sound to pass as clearly as possible. Since the included grille of the AE300 Mark II is magnetic type, it is very easy to put it on and off.
Recommended Accessories
Here is a list of accessories that we think you may need for the Acoustic Energy AE300 Mark II.
- Speaker Cable and Connectors
- Vibration Isolators: IsoAcoustics isolators are our favorite isolators but you may find more affordable options too.
- Acoustic Panels and Treatments: Your room is as important as your stereo equipment so acoustic treatments goes a long way in improving the overall performance.
- Speaker Stands: Stands bring your bookshelf speakers to ideal height (rule of thumb is to have the tweeter level with your ear in your listening position), helps stability and acoustical isolation.
Official Product Page
Official manufacturer's product page for the Acoustic Energy AE300 Mark II speaker can be found below:
Official Product Page for AE300 Mark II