In this review, we will be comparing AE300 Mark II and LS50 Meta, two Passive Bookshelf speakers from Acoustic Energy and KEF.
Let's have a brief look at the main features
of AE300 Mark II and KEF LS50 Meta first before getting into our more
detailed comparison.
| Key Specs | AE300 Mark II | KEF LS50 Meta |
|---|
| Brand | Acoustic Energy United Kingdom · founded 1987 | KEF United Kingdom · founded 1961 |
|---|
| Design | 2-way | 2-way |
|---|
| Uni-Q driver | — | 12th Generation Uni-Q |
|---|
| Tweeter | 1.1" Dome | 1" Hard-Dome |
|---|
| Woofer | 5" paper cone | 5.25" Aluminum |
|---|
| Frequency response | 42-29k Hz | 79-28k Hz |
|---|
| Sensitivity | 86 dB | 85 dB |
|---|
| Impedance | 6 ohms | 8 ohms |
|---|
| Power range | up to 120 watts | 40-100 watts |
|---|
| Weight | 7.00kg / 15.4lbs | 7.82kg / 17.2lbs |
|---|
| Dimensions (H x W x D) | 12.6" x 6.7" x 10.6" 320.0 x 170.0 x 270.0mm | 11-15/16" x 7.875" x 11-1/16" 303.0 x 201.0 x 281.0mm |
|---|
What size room are the AE300 Mark II and KEF LS50 Meta speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
AE300 Mark II |
KEF LS50 Meta |
| Near-field |
Average |
Average |
| Small Room |
Good |
Good |
| Mid-size Room |
Average |
Average |
| Large Room |
Poor |
Poor |
| Very Large Room |
Bad |
Bad |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
The sections below take each area in turn: drivers, frequency response, physical size and what you get in the box.
Drivers
Both AE300 Mark II and LS50 Meta are 2-way speakers.
AE300 Mark IIKEF LS50 Meta
TweeterWoofer
Front view, drawn to scale - cabinets and drivers share one scale, so sizes are directly comparable. Hover a driver for its size.
| Driver |
AE300 Mark II |
KEF LS50 Meta |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1.1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 5-inch
|
1 x 5.25-inch
|
AE300 Mark II features a 1.1" fabric Dome Tweeter and 1 x 5" paper cone Woofer with a Crossover frequency at 3.5kHz. On the other hand, the LS50 Meta features a 1" Aluminum Hard-Dome Tweeter and 1 x 5.25" Aluminum Woofer with a Crossover frequency at 2100Hz.
Frequency Response
AE300 Mark II has a frequency range of 42-29k Hz whereas LS50 Meta has a frequency range of 79-28k Hz. With a minimum frequency of 42Hz, the AE300 Mark II can go significantly deeper on the low side and provide stronger bass compared to the LS50 Meta's min frequency of 79Hz.
The graph below depicts how these two speakers compare with the max, min and average Low Frequency values of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
Neither pair reaches down to 20Hz, the usual definition of full-range, which is normal for speakers of this size. If you want the bottom octave for movies or bass-heavy music, add a subwoofer to whichever you choose. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
AE300 Mark II is a 6 ohms speaker compared to the LS50 Meta which has a nominal impedance of 8 ohms.
These two speakers also have different sensitivity levels. AE300 Mark II sensitivity is rated at 86 dB and the LS50 Meta's is rated at 85 dB. This 1 dB difference makes the AE300 Mark II a more sensitive speaker compared to KEF LS50 Meta, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. Staying
within that range gives nominal performance; driving the speaker beyond its maximum wattage can damage it.
AE300 Mark II can handle a max power of 120 watts RMS, whereas LS50 Meta has a max power handling value of 100 watts RMS, 20 watts less than the AE300 Mark II.
Note that higher power handling does not make a speaker louder: that depends mainly on
sensitivity and impedance. The calculator below shows how loud each of these actually plays
on a real amplifier.
Which plays louder on your amplifier?
Starting with a popular amplifier - change it to the one you own, or any you are
considering, and watch both numbers move.
Cabinet Type and Port Position
Both AE300 Mark II and LS50 Meta have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare AE300 Mark II's and KEF LS50 Meta's external dimensions. AE300 Mark II has external dimensions of 320.0 x 170.0 x 270.0mm (12.6 x 6.7 x 10.6inch) whereas KEF LS50 Meta has external dimensions of 303.0 x 201.0 x 281.0mm (11-15/16 x 7.875 x 11-1/16inch).
AE300 Mark II is 31mm narrower and 11mm less deeper than KEF LS50 Meta but it is also 17mm taller.
Size, drawn to scale
Both speakers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same surface and pushed back to the same wall, so the deeper one visibly sticks out further.
KEF LS50 Meta needs about 23% more floor or shelf area. AE300 Mark II is 17mm taller.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the AE300 Mark II is approximately 459.0cm2 / 71.1inch2 and base area of the KEF LS50 Meta is approximately 564.8cm2 / 87.5inch2. The AE300 Mark II requires 19% less surface area than the LS50 Meta which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The AE300 Mark II weighs 7.00kg / 15.4lbs and the KEF LS50 Meta weighs 7.82kg / 17.2lbs. This makes the LS50 Meta 12% heavier than the AE300 Mark II.
Here is a comparison of how AE300 Mark II and LS50 Meta's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of KEF LS50 Meta?
Here are the items that come with the LS50 Meta:
- 2 Bookshelf loudspeakers
- 2 Foam port plugs
- 8 Self-adhesive rubber feet
- Owners Manual
- Warranty Registration Card
Max Input Power |
120 watts
vs
100 watts
|
Handle more power from your amplifier |
Sensitivity |
86 dB
vs
85 dB
|
Play louder with same amount of amplification power |
Low Frequency Response |
42 Hz
vs
79 Hz
|
Generates deeper bass |
High Frequency Response |
29k Hz
vs
28k Hz
|
Generates higher frequency |
Base Surface Area |
459cm2
vs
564cm2
|
Takes less floor space |
Price per pair* |
1199USD
vs
1600USD
|
costs less (*prices may change depending on the seller, location and time) |
Nominal Impedance |
8 ohms
vs
6 ohms
|
Less selective with amplifiers |
Woofer Size |
5.25 inches
vs
5 inches
|
Larger woofer |
Height |
303mm
vs
320mm
|
Easier to fit in smaller spaces |
| General |
Acoustic Energy AE300 Mark II |
KEF LS50 Meta |
| Brand |
Acoustic Energy |
KEF |
| Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
| Power Range |
up to 120 watts |
40-100 watts |
| Sensitivity |
86 dB |
85 dB |
| Impedance |
6 ohms |
8 ohms |
| Impedance |
n/a |
3.5 ohms |
| Frequency Response |
42-29k Hz |
79-28k Hz |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
5" |
5.25" |
| Woofer Composition |
paper cone |
Aluminum |
| Woofer Surround Material |
n/a |
Rubber |
| Tweeter Size |
1.1" |
1" |
| Tweeter Type |
Dome |
Hard-Dome |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
3.5kHz |
2100Hz |
| Firing Direction |
rear |
rear |
Physical Specs |
|
|
| Height |
320.0mm (12.6") |
303.0mm (11.9") |
| Width |
170.0mm (6.7") |
201.0mm (7.9") |
| Depth |
270.0mm (10.6") |
281.0mm (11.1") |
| Weight |
7.00kg (15.4lbs) |
7.82kg (17.2lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
18 mm RSC constrained-layer MDF/bitumen |
MDF/Polymer |
| Available Colors |
Walnut,Silk-Touch Matte Black,Silk-Touch Matte White |
Carbon Black,Titanium Grey,Royal Blue,Mineral White |
| Mounting Bracket |
|
No |
| Recommended Stand Height |
n/a |
25-30" |
| Grille |
Yes |
n/a |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
n/a |
No |
Other |
|
|
| Parts Warranty |
|
5 Years |
| Labor Warranty |
|
5 Years |
A generation apart: AE300 Mark II is the newer design, against a 2020 model. Newer is not automatically better, but the older one is more likely to be discounted or near run-out.
| Area | Better | Why |
|---|
| Bass | A | AE300 Mark II digs deeper - 42Hz against 79Hz. |
| Amplifier needs | evenly matched | Similar sensitivity (86dB vs 85dB) - both want much the same power. |
| Amplifier match | B | KEF LS50 Meta is the easier load at 8 ohms. |
| Headroom | evenly matched | Similar power handling (120W vs 100W). |
| Size | depends | Similar cabinet size - neither is easier to fit. |
| Expandability | depends | Neither adds bi-amping, a sub output or height drivers. KEF LS50 Meta sits in a wider range (10 models), so a matched surround system is easier later. |
| Price | A | AE300 Mark II is cheaper - $1,199 against $1,600, about 25% less. |
A AE300 Mark II B KEF LS50 Meta
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both speakers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
Neither runs away with it - they trade advantages. Let the "depends" rows and your own room settle it. If a subwoofer is in your plans, the bass gap largely stops mattering - you would be crossing over above 79Hz anyway, so judge these on the other rows instead. Think about the whole system, not just the speakers: the roughly $401 saved by taking the cheaper pair would buy a subwoofer or a better amplifier, and either usually does more for the sound than the difference between these two.
And remember what a spec sheet cannot show: how each looks in your room and whether the finish suits it, what dealer support and warranty are like where you live, and how they actually sound to you. If you can hear them first - ideally with your own music - that will tell you more than any number above.