Acoustic Energy AE309 Mark II is a 2-way Passive Bass Reflex Floor-standing speaker by Acoustic Energy. It was released in February 2025. It features a 1.1" Dome Tweeter and 2 x 5" paper cone Woofer.
Slim 2.5-way tower: a 29 mm fabric dome and two 125 mm (5-inch) paper cones, the lower one rolled off at 285 Hz. Rear slot port. 900 mm tall, 920 mm on the supplied spikes. Frequency range quoted at +/-6 dB.
The speaker has a frequency range of 33-29k Hz and a sensitivity of 89 dB. AE309 Mark II has an MSRP of 2199$ per pair.
Room Size Suitability
The size of the room where you plan to use the AE309 Mark II is a crucial factor in your decision. We have assessed its suitability for various room sizes based on its dimensions and maximum power output:
| Listening Environment* |
Suitability |
| Near-field | Bad |
| Small Room | Poor |
| Mid-size Room | Good |
| Large Room | Good |
| Very Large Room | Poor |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2, Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: > 400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual listening experience changes depending on floor height, room shape, surface materials, listening position, speaker locations, etc.)
Acoustic Energy replaced the older AE309 with this model. Follow the link to read our detailed comparison of these models:
Compare AE309 Mark II vs AE309
Acoustic Energy's AE300 Mark II Series of Loudspeakers
AE309 Mark II is a member of Acoustic Energy's AE300 Mark II series of Passive speakers. Below you can see the main specs of these speakers.
See all 4 Acoustic Energy AE300 Mark II models compared »
Acoustic Energy AE300 Mark II Series Speakers
Frequency Response of the AE309 Mark II Speaker
AE309 Mark II has a Frequency response range of 33-29k Hz at ±6dB and Power Range of up to 120 watts. With a minimum frequency of 33 Hz, AE309 Mark II delivers deep bass that will likely satisfy most listeners, especially those who enjoy music. However, movie enthusiasts and music fans who prefer a full range of sound may still benefit from adding a subwoofer.
Here we have a comparison of how AE309 Mark II's Low frequency value compares with the average, max and min Low frequency values in its class.
Low Frequency
Floor-standing Speakers
Thinking about a subwoofer for the AE309 Mark II?
Among the speakers in our database priced under $3,000 a pair, these are the 5 Passive Floor-standing speakers that have deeper bass than the AE309 Mark II's 33Hz:
Crossover frequency of the AE309 Mark II?
The crossover frequency of the AE309 Mark II is set to 285Hz and 3.8kHz. This is the threshold frequency where the higher frequency signals over this level are sent to the tweeter and the lower-frequency signals are sent to the woofer by the crossover component.
Impedance and Sensitivity
AE309 Mark II's nominal impedance level is
6 ohms and has a sensitivity of
89 dB.
Sensitivity
Floor-standing Speakers
Nominal Impedance of the 6 Ohms makes the Acoustic Energy AE309 Mark II a relatively difficult to drive speaker compared to more frequently found 8 ohms speakers from nominal Impedance perspective.
Sensitivity
89dB of the Acoustic Energy AE309 Mark II is an average sensitivity for stereo speaker so it is neither easy nor difficult to drive Sensitivity wise. Work out how loud the AE309 Mark II plays in your room →
Running more than one pair from a single amplifier? Check the load it would present →
What amplifier does the AE309 Mark II need?
At normal listening levels in a medium room, about
13–120 W
per channel into 6 ohms.
Set your own conditions and we will rank every amplifier we cover.
Prefer to browse? Integrated amplifiers under $3,000, or every amplifier we cover.
Input Type
AE309 Mark II features type connectors.
AE309 Mark II External Dimensions and Weight
AE309 Mark II has external dimensions of (Height x Width x Depth) 35.4 x 6.7 x 10.6inch (900.0 x 170.0 x 270.0mm ).
Base Surface Area
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base area of AE309 Mark II is approximately 459.0cm2 / 71.1inch2.
Millimetres are hard to picture, so here is the AE309 Mark II drawn to scale next to the AE320 Mark II, the speaker our readers compare it with most often.
Size, drawn to scale
Both speakers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same surface and pushed back to the same wall, so the deeper one visibly sticks out further.
AE320 Mark II needs about 53% more floor or shelf area. AE320 Mark II is 80mm deeper, so it stands that much further out from the wall. AE320 Mark II is 150mm taller.
Full comparison: AE309 Mark II vs AE320 Mark II ›
Find speakers that fit your shelf or alcove → · Work out where they should sit in the room →
WeightThe AE309 Mark II weighs 18.50kg / 40.7lbs per piece. Here is a comparison of how AE309 Mark II's weight compares with the average, max and min weights in its class.
Weight
All Floor-standing Speakers
Weight
Floor-standing Speakers under $3,000
How does the AE309 Mark II compare to the Acoustic Energy AE320 Mark II?
One of the natural alternative to the AE309 Mark II is the AE320 Mark II which is located one step higher in Acoustic Energy's Passive Floor-standing selection.
Check the Detailed Comparison of AE309 Mark II vs AE320 Mark II for more details.
Cabinet type and Materials
AE309 Mark II has a
Bass Reflex type cabinet and a 18 mm RSC constrained-layer MDF/bitumen finish. Bass Reflex type loudspeakers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs.
Port Position
AE309 Mark II is a rear-firing port speaker so you have to make sure you leave enough space between the back of the speaker and wall or bookshelf so that it has room to breathe.
Available colors
AE309 Mark II is available in Walnut, Silk-Touch Matte Black and Silk-Touch Matte White.
Does the AE309 Mark II come with a Grille?
AE309 Mark II comes with magnetic grilles. The purpose of the grille is to protect the delicate driver elements from external impacts while still allowing the sound to pass as clearly as possible. Since the included grille of the AE309 Mark II is magnetic type, it is very easy to put it on and off.
Recommended Accessories
Here is a list of accessories that we think you may need for the Acoustic Energy AE309 Mark II.
Official Product Page
Official manufacturer's product page for the Acoustic Energy AE309 Mark II speaker can be found below:
Official Product Page for AE309 Mark II