In this review, we will be comparing AE320 Mark II and AE309 Mark II, two Passive Floor-standing speakers by Acoustic Energy.
Let's have a brief look at the main features
of AE320 Mark II and AE309 Mark II first before getting into our more
detailed comparison.
| Key Specs | AE320 Mark II | AE309 Mark II |
|---|
| Brand | Acoustic Energy United Kingdom · founded 1987 | Acoustic Energy United Kingdom · founded 1987 |
|---|
| Design | 3-way | 2-way |
|---|
| Tweeter | 1.1" Dome | 1.1" Dome |
|---|
| Midrange | 5" | — |
|---|
| Woofer | 2 x 6.5" paper/coconut-fibre cone | 2 x 5" paper cone |
|---|
| Frequency response | 30-29k Hz | 33-29k Hz |
|---|
| Sensitivity | 92 dB | 89 dB |
|---|
| Impedance | 6 ohms | 6 ohms |
|---|
| Power range | up to 200 watts | up to 120 watts |
|---|
| Weight | 26.00kg / 57.2lbs | 18.50kg / 40.7lbs |
|---|
| Dimensions (H x W x D) | 41.3" x 7.9" x 13.8" 1050.0 x 200.0 x 350.0mm | 35.4" x 6.7" x 10.6" 900.0 x 170.0 x 270.0mm |
|---|
AE320 Mark II and AE309 Mark II are members of Acoustic Energy's AE300 Mark II series of speakers. Below you can find the loudspeakers from this series.
What size room are the AE320 Mark II and AE309 Mark II speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
AE320 Mark II |
AE309 Mark II |
| Near-field |
Bad |
Bad |
| Small Room |
Poor |
Poor |
| Mid-size Room |
Average |
Good |
| Large Room |
Good |
Good |
| Very Large Room |
Average |
Poor |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
The sections below take each area in turn: drivers, frequency response, physical size and what you get in the box.
Drivers
One of the fundamental differences between these two speakers is that AE320 Mark II is a 3-way design whereas the AE309 Mark II is a 2-way speaker. 3-way designs utilize a midrange driver in addition to the tweeter and woofer on 2-way designs. Designing a crossover for a 3-way speaker is a complicated process and generally increases the overall cost of the speaker.
AE320 Mark IIAE309 Mark II
TweeterMidrangeWoofer
Front view, drawn to scale - cabinets and drivers share one scale, so sizes are directly comparable. Hover a driver for its size.
| Driver |
AE320 Mark II |
AE309 Mark II |
|
Driver Setup
|
3-way
|
2-way
|
|
Tweeter
|
1.1-inch
|
1.1-inch
|
|
Midrange
|
1 x 5-inch |
- |
|
Woofer
|
2 x 6.5-inch
|
2 x 5-inch
|
AE320 Mark II features a 1.1" fabric Dome Tweeter, a 5" Midrange and 2 x 6.5" paper/coconut-fibre cone Woofer with a Crossover frequency at 240Hz and 2.8kHz. On the other hand, the AE309 Mark II features a 1.1" fabric Dome Tweeter and 2 x 5" paper cone Woofer with a Crossover frequency at 285Hz and 3.8kHz.
Frequency Response
AE320 Mark II has a frequency range of 30-29k Hz whereas AE309 Mark II has a frequency range of 33-29k Hz. With a minimum frequency of 30Hz, the AE320 Mark II can go slightly deeper then the AE309 Mark II's min frequency of 33Hz.
The graph below depicts how these two speakers compare with the max, min and average Low Frequency values of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
Neither pair reaches down to 20Hz, the usual definition of full-range, which is normal for speakers of this size. If you want the bottom octave for movies or bass-heavy music, add a subwoofer to whichever you choose. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
AE320 Mark II and AE309 Mark II have the same Impedance of 6 ohms but where they differ is the sensitivity levels. AE320 Mark II sensitivity is rated at 92 dB and the AE309 Mark II's is at 89 dB. This 3 dB difference makes the AE320 Mark II a more sensitive speaker compared to AE309 Mark II, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. Staying
within that range gives nominal performance; driving the speaker beyond its maximum wattage can damage it.
AE320 Mark II can handle a max power of 200 watts RMS, whereas AE309 Mark II has a max power handling value of 120 watts RMS, 80 watts less than the AE320 Mark II.
Note that higher power handling does not make a speaker louder: that depends mainly on
sensitivity and impedance. The calculator below shows how loud each of these actually plays
on a real amplifier.
Which plays louder on your amplifier?
Starting with a popular amplifier - change it to the one you own, or any you are
considering, and watch both numbers move.
Cabinet Type and Port Position
Both AE320 Mark II and AE309 Mark II have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare AE320 Mark II's and AE309 Mark II's external dimensions. AE320 Mark II has external dimensions of 1050.0 x 200.0 x 350.0mm (41.3 x 7.9 x 13.8inch) whereas AE309 Mark II has external dimensions of 900.0 x 170.0 x 270.0mm (35.4 x 6.7 x 10.6inch).
AE320 Mark II is clearly the larger of the two speakers. Its body is 30mm wider, 150mm taller and 80mm deeper than AE309 Mark II.
Size, drawn to scale
Both speakers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same surface and pushed back to the same wall, so the deeper one visibly sticks out further.
AE320 Mark II needs about 53% more floor or shelf area. AE320 Mark II is 80mm deeper, so it stands that much further out from the wall. AE320 Mark II is 150mm taller.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the AE320 Mark II is approximately 700.0cm2 / 108.5inch2 and base area of the AE309 Mark II is approximately 459.0cm2 / 71.1inch2. The AE320 Mark II requires 53% more surface area than the AE309 Mark II which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The AE320 Mark II weighs 26.00kg / 57.2lbs and the AE309 Mark II weighs 18.50kg / 40.7lbs. This makes the AE320 Mark II 41% heavier than the AE309 Mark II.
Here is a comparison of how AE320 Mark II and AE309 Mark II's weights compare with the average, max and min weights in Passive Floor-standing class.
Weight
All Floor-standing Speakers
Max Input Power |
200 watts
vs
120 watts
|
Handle more power from your amplifier |
Driver Setup |
3-way
vs
2-way
|
Have a dedicated mid-range driver |
Sensitivity |
92 dB
vs
89 dB
|
Play louder with same amount of amplification power |
Woofer Size |
6.5 inches
vs
5 inches
|
Larger woofer |
Low Frequency Response |
30 Hz
vs
33 Hz
|
Generates deeper bass |
Height |
900mm
vs
1050mm
|
Easier to fit in smaller spaces |
Base Surface Area |
459cm2
vs
700cm2
|
Takes less floor space |
Price per pair* |
2199USD
vs
3199USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
Acoustic Energy AE320 Mark II |
Acoustic Energy AE309 Mark II |
| Brand |
Acoustic Energy |
Acoustic Energy |
| Speaker Type |
Floor-standing speaker |
Floor-standing speaker |
| Power Range |
up to 200 watts |
up to 120 watts |
| Sensitivity |
92 dB |
89 dB |
| Impedance |
6 ohms |
6 ohms |
| Frequency Response |
30-29k Hz |
33-29k Hz |
Drivers |
|
|
| Woofer Quantity |
2 |
2 |
| Woofer Size |
6.5" |
5" |
| Woofer Composition |
paper/coconut-fibre cone |
paper cone |
| Tweeter Size |
1.1" |
1.1" |
| Tweeter Type |
Dome |
Dome |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
5" |
No |
| Crossover Frequency |
240Hz and 2.8kHz |
285Hz and 3.8kHz |
| Firing Direction |
rear |
rear |
Physical Specs |
|
|
| Height |
1050.0mm (41.3") |
900.0mm (35.4") |
| Width |
200.0mm (7.9") |
170.0mm (6.7") |
| Depth |
350.0mm (13.8") |
270.0mm (10.6") |
| Weight |
26.00kg (57.2lbs) |
18.50kg (40.7lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
18 mm RSC constrained-layer MDF/bitumen |
18 mm RSC constrained-layer MDF/bitumen |
| Available Colors |
Walnut,Silk-Touch Matte Black,Silk-Touch Matte White |
Walnut,Silk-Touch Matte Black,Silk-Touch Matte White |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
|
|
| Labor Warranty |
|
|
Siblings in Acoustic Energy's AE300 Mark II series, so they share a family sound. It comes down to size, output and price.
| Area | Better | Why |
|---|
| Bass | A | AE320 Mark II digs deeper - 30Hz against 33Hz. A subwoofer would even that out. |
| Amplifier needs | A | AE320 Mark II is more sensitive (92dB vs 89dB), so it goes louder on the same amplifier. |
| Headroom | A | AE320 Mark II takes more power (200W vs 120W) - more in hand in a big room. |
| Size | depends | AE309 Mark II is easier to place; AE320 Mark II is bigger, which usually goes with fuller bass. Your room decides. |
| Price | B | AE309 Mark II is cheaper - $2,199 against $3,199, about 31% less. |
A AE320 Mark II B AE309 Mark II
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both speakers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
The usual trade-off: AE320 Mark II measures better, AE309 Mark II costs about about 45% more% less. Whether that gap is worth the money is the call only you can make - and in a normal room it is often smaller than the numbers suggest. Match it to your room: we rate AE320 Mark II the better fit for a very large room, and AE309 Mark II for a mid-size room. In a large or open-plan room, AE320 Mark II has the cabinet volume to fill it more easily; in a small room, near a wall or at desk distance, AE309 Mark II is the easier speaker to get right.
And remember what a spec sheet cannot show: how each looks in your room and whether the finish suits it, what dealer support and warranty are like where you live, and how they actually sound to you. If you can hear them first - ideally with your own music - that will tell you more than any number above.