In this review, we will be comparing AE309 Mark II and AE309, two Passive Floor-standing speakers by Acoustic Energy.
Let's have a brief look at the main features
of AE309 Mark II and AE309 first before getting into our more
detailed comparison.
| Key Specs | AE309 Mark II | AE309 |
|---|
| Brand | Acoustic Energy United Kingdom · founded 1987 | Acoustic Energy United Kingdom · founded 1987 |
|---|
| Design | 2-way | 3-way |
|---|
| Tweeter | 1.1" Dome | 1.1" dome with waveguide |
|---|
| Midrange | — | 5.2" |
|---|
| Woofer | 2 x 5" paper cone | 5.2" ceramic aluminium sandwich |
|---|
| Frequency response | 33-29k Hz | 38Hz - 30kHz |
|---|
| Sensitivity | 89 dB | 89 dB |
|---|
| Impedance | 6 ohms | 6 ohms |
|---|
| Power range | up to 120 watts | up to 175 watts |
|---|
| Weight | 18.50kg / 40.7lbs | 22.00kg / 48.4lbs |
|---|
| Dimensions (H x W x D) | 35.4" x 6.7" x 10.6" 900.0 x 170.0 x 270.0mm | 35.4" x 6.9" x 10.2" 900.0 x 175.0 x 260.0mm |
|---|
What size room are the AE309 Mark II and AE309 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
AE309 Mark II |
AE309 |
| Near-field |
Bad |
Bad |
| Small Room |
Poor |
Poor |
| Mid-size Room |
Good |
Good |
| Large Room |
Good |
Good |
| Very Large Room |
Poor |
Poor |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
The sections below take each area in turn: drivers, frequency response, physical size and what you get in the box.
Drivers
One of the fundamental differences between these two speakers is that AE309 Mark II is a 2-way design whereas the AE309 is a 3-way speaker. 3-way designs utilize a midrange driver in addition to the tweeter and woofer on 2-way designs. Designing a crossover for a 3-way speaker is a complicated process and generally increases the overall cost of the speaker.
AE309 Mark IIAE309
TweeterMidrangeWoofer
Front view, drawn to scale - cabinets and drivers share one scale, so sizes are directly comparable. Hover a driver for its size.
| Driver |
AE309 Mark II |
AE309 |
|
Driver Setup
|
2-way
|
3-way
|
|
Tweeter
|
1.1-inch
|
1.1-inch
|
|
Midrange
|
- |
1 x 5.2-inch |
|
Woofer
|
2 x 5-inch
|
1 x 5.2-inch
|
AE309 Mark II features a 1.1" fabric Dome Tweeter and 2 x 5" paper cone Woofer with a Crossover frequency at 285Hz and 3.8kHz. On the other hand, the AE309 features a 1.1" aluminium dome with waveguide Tweeter, a 5.2" Midrange and 1 x 5.2" ceramic aluminium sandwich Woofer with a Crossover frequency at 296Hz and 2560Hz.
Frequency Response
AE309 Mark II has a frequency range of 33-29k Hz whereas AE309 has a frequency range of 38Hz - 30kHz. With a minimum frequency of 33Hz, the AE309 Mark II can go significantly deeper on the low side and provide stronger bass compared to the AE309's min frequency of 38Hz.
The graph below depicts how these two speakers compare with the max, min and average Low Frequency values of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
Neither pair reaches down to 20Hz, the usual definition of full-range, which is normal for speakers of this size. If you want the bottom octave for movies or bass-heavy music, add a subwoofer to whichever you choose. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
AE309 Mark II and AE309 have the same Impedance of 6 ohms and their sensitivity is also same at 89 dB.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. Staying
within that range gives nominal performance; driving the speaker beyond its maximum wattage can damage it.
AE309 can handle a max power of 175 watts RMS, whereas AE309 Mark II has a max power handling value of 120 watts RMS, 55 watts less than the AE309.
Note that higher power handling does not make a speaker louder: that depends mainly on
sensitivity and impedance. The calculator below shows how loud each of these actually plays
on a real amplifier.
Which plays louder on your amplifier?
Starting with a popular amplifier - change it to the one you own, or any you are
considering, and watch both numbers move.
Cabinet Type and Port Position
Both AE309 Mark II and AE309 have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare AE309 Mark II's and AE309's external dimensions. AE309 Mark II has external dimensions of 900.0 x 170.0 x 270.0mm (35.4 x 6.7 x 10.6inch) whereas AE309 has external dimensions of 900.0 x 175.0 x 260.0mm (35.4 x 6.9 x 10.2inch).
Size, drawn to scale
Both speakers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same surface and pushed back to the same wall, so the deeper one visibly sticks out further.
Near-identical footprints.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the AE309 Mark II is approximately 459.0cm2 / 71.1inch2 and base area of the AE309 is approximately 455.0cm2 / 70.5inch2. The AE309 Mark II requires 1% more surface area than the AE309 which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The AE309 Mark II weighs 18.50kg / 40.7lbs and the AE309 weighs 22.00kg / 48.4lbs. This makes the AE309 19% heavier than the AE309 Mark II.
Here is a comparison of how AE309 Mark II and AE309's weights compare with the average, max and min weights in Passive Floor-standing class.
Weight
All Floor-standing Speakers
Number of Woofers |
2
vs
1
|
More woofers |
Low Frequency Response |
33 Hz
vs
38 Hz
|
Generates deeper bass |
Max Input Power |
175 watts
vs
120 watts
|
Handle more power from your amplifier |
Driver Setup |
3-way
vs
2-way
|
Have a dedicated mid-range driver |
Woofer Size |
5.2 inches
vs
5 inches
|
Larger woofer |
High Frequency Response |
30k Hz
vs
29k Hz
|
Generates higher frequency |
Base Surface Area |
455cm2
vs
459cm2
|
Takes less floor space |
Price per pair* |
1899USD
vs
2199USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
Acoustic Energy AE309 Mark II |
Acoustic Energy AE309 |
| Brand |
Acoustic Energy |
Acoustic Energy |
| Speaker Type |
Floor-standing speaker |
Floor-standing speaker |
| Power Range |
up to 120 watts |
up to 175 watts |
| Sensitivity |
89 dB |
89 dB |
| Impedance |
6 ohms |
6 ohms |
| Frequency Response |
33-29k Hz |
38Hz - 30kHz |
Drivers |
|
|
| Woofer Quantity |
2 |
1 |
| Woofer Size |
5" |
5.2" |
| Woofer Composition |
paper cone |
ceramic aluminium sandwich |
| Tweeter Size |
1.1" |
1.1" |
| Tweeter Type |
Dome |
dome with waveguide |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
5.2" |
| Crossover Frequency |
285Hz and 3.8kHz |
296Hz and 2560Hz |
| Firing Direction |
rear |
rear |
Physical Specs |
|
|
| Height |
900.0mm (35.4") |
900.0mm (35.4") |
| Width |
170.0mm (6.7") |
175.0mm (6.9") |
| Depth |
270.0mm (10.6") |
260.0mm (10.2") |
| Weight |
18.50kg (40.7lbs) |
22.00kg (48.4lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
18 mm RSC constrained-layer MDF/bitumen |
high density MDF |
| Available Colors |
Walnut,Silk-Touch Matte Black,Silk-Touch Matte White |
Piano Gloss White, Piano Gloss Black, Real Walnut wood veneer |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
|
|
| Labor Warranty |
|
|
A generation apart: AE309 Mark II is the newer design, against a 2017 model. Newer is not automatically better, but the older one is more likely to be discounted or near run-out.
| Area | Better | Why |
|---|
| Bass | A | AE309 Mark II digs deeper - 33Hz against 38Hz. A subwoofer would even that out. |
| Amplifier needs | evenly matched | Similar sensitivity (89dB vs 89dB) - both want much the same power. |
| Headroom | B | AE309 takes more power (175W vs 120W) - more in hand in a big room. |
| Size | depends | Similar cabinet size - neither is easier to fit. |
| Price | B | AE309 is cheaper - $1,899 against $2,199, about 14% less. |
A AE309 Mark II B AE309
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both speakers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
Neither runs away with it - they trade advantages. Let the "depends" rows and your own room settle it. If a subwoofer is in your plans, the bass gap largely stops mattering - you would be crossing over above 38Hz anyway, which makes the cheaper AE309 much easier to justify.
And remember what a spec sheet cannot show: how each looks in your room and whether the finish suits it, what dealer support and warranty are like where you live, and how they actually sound to you. If you can hear them first - ideally with your own music - that will tell you more than any number above.