In this review, we will be comparing AE300 Mark II and AE300, two Passive Bookshelf speakers by Acoustic Energy.
Let's have a brief look at the main features
of AE300 Mark II and AE300 first before getting into our more
detailed comparison.
| Key Specs | AE300 Mark II | AE300 |
|---|
| Brand | Acoustic Energy United Kingdom · founded 1987 | Acoustic Energy United Kingdom · founded 1987 |
|---|
| Design | 2-way | 2-way |
|---|
| Tweeter | 1.1" Dome | 1.1" dome with waveguide |
|---|
| Woofer | 5" paper cone | 5.2" ceramic aluminium sandwich |
|---|
| Frequency response | 42-29k Hz | 45Hz - 30kHz |
|---|
| Sensitivity | 86 dB | 86 dB |
|---|
| Impedance | 6 ohms | 6 ohms |
|---|
| Power range | up to 120 watts | up to 100 watts |
|---|
| Weight | 7.00kg / 15.4lbs | 6.50kg / 14.3lbs |
|---|
| Dimensions (H x W x D) | 12.6" x 6.7" x 10.6" 320.0 x 170.0 x 270.0mm | 11.8" x 6.9" x 10.2" 300.0 x 175.0 x 260.0mm |
|---|
What size room are the AE300 Mark II and AE300 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
AE300 Mark II |
AE300 |
| Near-field |
Average |
Average |
| Small Room |
Good |
Good |
| Mid-size Room |
Average |
Average |
| Large Room |
Poor |
Poor |
| Very Large Room |
Bad |
Bad |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
The sections below take each area in turn: drivers, frequency response, physical size and what you get in the box.
Drivers
Both AE300 Mark II and AE300 are 2-way speakers.
AE300 Mark IIAE300
TweeterWoofer
Front view, drawn to scale - cabinets and drivers share one scale, so sizes are directly comparable. Hover a driver for its size.
| Driver |
AE300 Mark II |
AE300 |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1.1-inch
|
1.1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 5-inch
|
1 x 5.2-inch
|
AE300 Mark II features a 1.1" fabric Dome Tweeter and 1 x 5" paper cone Woofer with a Crossover frequency at 3.5kHz. On the other hand, the AE300 features a 1.1" aluminium dome with waveguide Tweeter and 1 x 5.2" ceramic aluminium sandwich Woofer with a Crossover frequency at 2800Hz.
Frequency Response
AE300 Mark II has a frequency range of 42-29k Hz whereas AE300 has a frequency range of 45Hz - 30kHz. With a minimum frequency of 42Hz, the AE300 Mark II can go slightly deeper then the AE300's min frequency of 45Hz.
The graph below depicts how these two speakers compare with the max, min and average Low Frequency values of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
Neither pair reaches down to 20Hz, the usual definition of full-range, which is normal for speakers of this size. If you want the bottom octave for movies or bass-heavy music, add a subwoofer to whichever you choose. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
AE300 Mark II and AE300 have the same Impedance of 6 ohms and their sensitivity is also same at 86 dB.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. Staying
within that range gives nominal performance; driving the speaker beyond its maximum wattage can damage it.
AE300 Mark II can handle a max power of 120 watts RMS, whereas AE300 has a max power handling value of 100 watts RMS, 20 watts less than the AE300 Mark II.
Note that higher power handling does not make a speaker louder: that depends mainly on
sensitivity and impedance. The calculator below shows how loud each of these actually plays
on a real amplifier.
Which plays louder on your amplifier?
Starting with a popular amplifier - change it to the one you own, or any you are
considering, and watch both numbers move.
Cabinet Type and Port Position
Both AE300 Mark II and AE300 have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare AE300 Mark II's and AE300's external dimensions. AE300 Mark II has external dimensions of 320.0 x 170.0 x 270.0mm (12.6 x 6.7 x 10.6inch) whereas AE300 has external dimensions of 300.0 x 175.0 x 260.0mm (11.4 x 6.9 x 10.2inch).
AE300 is 20mm shorter and 10mm less deeper than AE300 Mark II but it is also 5mm wider.
Size, drawn to scale
Both speakers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same surface and pushed back to the same wall, so the deeper one visibly sticks out further.
Near-identical footprints. AE300 Mark II is 20mm taller.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the AE300 Mark II is approximately 459.0cm2 / 71.1inch2 and base area of the AE300 is approximately 455.0cm2 / 70.5inch2. The AE300 Mark II requires 1% more surface area than the AE300 which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The AE300 Mark II weighs 7.00kg / 15.4lbs and the AE300 weighs 6.50kg / 14.3lbs. This makes the AE300 Mark II 8% heavier than the AE300.
Here is a comparison of how AE300 Mark II and AE300's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
Max Input Power |
120 watts
vs
100 watts
|
Handle more power from your amplifier |
Low Frequency Response |
42 Hz
vs
45 Hz
|
Generates deeper bass |
Woofer Size |
5.2 inches
vs
5 inches
|
Larger woofer |
High Frequency Response |
30k Hz
vs
29k Hz
|
Generates higher frequency |
Height |
300mm
vs
320mm
|
Easier to fit in smaller spaces |
Base Surface Area |
455cm2
vs
459cm2
|
Takes less floor space |
Price per pair* |
1099USD
vs
1199USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
Acoustic Energy AE300 Mark II |
Acoustic Energy AE300 |
| Brand |
Acoustic Energy |
Acoustic Energy |
| Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
| Power Range |
up to 120 watts |
up to 100 watts |
| Sensitivity |
86 dB |
86 dB |
| Impedance |
6 ohms |
6 ohms |
| Frequency Response |
42-29k Hz |
45Hz - 30kHz |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
5" |
5.2" |
| Woofer Composition |
paper cone |
ceramic aluminium sandwich |
| Tweeter Size |
1.1" |
1.1" |
| Tweeter Type |
Dome |
dome with waveguide |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
3.5kHz |
2800Hz |
| Firing Direction |
rear |
rear |
Physical Specs |
|
|
| Height |
320.0mm (12.6") |
300.0mm (11.8") |
| Width |
170.0mm (6.7") |
175.0mm (6.9") |
| Depth |
270.0mm (10.6") |
260.0mm (10.2") |
| Weight |
7.00kg (15.4lbs) |
6.50kg (14.3lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
18 mm RSC constrained-layer MDF/bitumen |
high density MDF |
| Available Colors |
Walnut,Silk-Touch Matte Black,Silk-Touch Matte White |
Piano Gloss White, Piano Gloss Black, Real Walnut wood veneer |
| Mounting Bracket |
|
|
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
|
|
| Labor Warranty |
|
|
A generation apart: AE300 Mark II is the newer design, against a 2017 model. Newer is not automatically better, but the older one is more likely to be discounted or near run-out.
| Area | Better | Why |
|---|
| Bass | A | AE300 Mark II digs deeper - 42Hz against 45Hz. A subwoofer would even that out. |
| Amplifier needs | evenly matched | Similar sensitivity (86dB vs 86dB) - both want much the same power. |
| Headroom | evenly matched | Similar power handling (120W vs 100W). |
| Size | depends | Similar cabinet size - neither is easier to fit. |
| Price | evenly matched | Much the same money ($1,199 vs $1,099 a pair). |
A AE300 Mark II B AE300
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both speakers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
AE300 Mark II has the edge on paper, though the margin is not large. The rows marked "depends" may matter more to you than the score does.
And remember what a spec sheet cannot show: how each looks in your room and whether the finish suits it, what dealer support and warranty are like where you live, and how they actually sound to you. If you can hear them first - ideally with your own music - that will tell you more than any number above.