In this review, we will be comparing AE320 Mark II and AE320, two Passive Floor-standing speakers by Acoustic Energy.
Let's have a brief look at the main features
of AE320 Mark II and AE320 first before getting into our more
detailed comparison.
| Key Specs | AE320 Mark II | AE320 |
|---|
| Brand | Acoustic Energy United Kingdom · founded 1987 | Acoustic Energy United Kingdom · founded 1987 |
|---|
| Design | 3-way | 3-way |
|---|
| Tweeter | 1.1" Dome | 1.1" dome with waveguide |
|---|
| Midrange | 5" | 5.2" |
|---|
| Woofer | 2 x 6.5" paper/coconut-fibre cone | 2 x 5.2" ceramic aluminium sandwich |
|---|
| Frequency response | 30-29k Hz | 35Hz - 30kHz |
|---|
| Sensitivity | 92 dB | 90 dB |
|---|
| Impedance | 6 ohms | 8 ohms |
|---|
| Power range | up to 200 watts | up to 200 watts |
|---|
| Weight | 26.00kg / 57.2lbs | 26.00kg / 57.2lbs |
|---|
| Dimensions (H x W x D) | 41.3" x 7.9" x 13.8" 1050.0 x 200.0 x 350.0mm | 39.4" x 6.9" x 10.2" 1000.0 x 175.0 x 260.0mm |
|---|
What size room are the AE320 Mark II and AE320 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
AE320 Mark II |
AE320 |
| Near-field |
Bad |
Bad |
| Small Room |
Poor |
Poor |
| Mid-size Room |
Average |
Good |
| Large Room |
Good |
Good |
| Very Large Room |
Average |
Poor |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
The sections below take each area in turn: drivers, frequency response, physical size and what you get in the box.
Drivers
Both AE320 Mark II and AE320 are 3-way speakers.
AE320 Mark IIAE320
TweeterMidrangeWoofer
Front view, drawn to scale - cabinets and drivers share one scale, so sizes are directly comparable. Hover a driver for its size.
| Driver |
AE320 Mark II |
AE320 |
|
Driver Setup
|
3-way
|
3-way
|
|
Tweeter
|
1.1-inch
|
1.1-inch
|
|
Midrange
|
1 x 5-inch |
1 x 5.2-inch |
|
Woofer
|
2 x 6.5-inch
|
2 x 5.2-inch
|
AE320 Mark II features a 1.1" fabric Dome Tweeter, a 5" Midrange and 2 x 6.5" paper/coconut-fibre cone Woofer with a Crossover frequency at 240Hz and 2.8kHz. On the other hand, the AE320 features a 1.1" aluminium dome with waveguide Tweeter, a 5.2" Midrange and 2 x 5.2" ceramic aluminium sandwich Woofer with a Crossover frequency at 380Hz and 3400Hz.
Frequency Response
AE320 Mark II has a frequency range of 30-29k Hz whereas AE320 has a frequency range of 35Hz - 30kHz. With a minimum frequency of 30Hz, the AE320 Mark II can go significantly deeper on the low side and provide stronger bass compared to the AE320's min frequency of 35Hz.
The graph below depicts how these two speakers compare with the max, min and average Low Frequency values of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
Neither pair reaches down to 20Hz, the usual definition of full-range, which is normal for speakers of this size. If you want the bottom octave for movies or bass-heavy music, add a subwoofer to whichever you choose. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
AE320 Mark II is a 6 ohms speaker compared to the AE320 which has a nominal impedance of 8 ohms.
These two speakers also have different sensitivity levels. AE320 Mark II sensitivity is rated at 92 dB and the AE320's is rated at 90 dB. This 2 dB difference makes the AE320 Mark II a more sensitive speaker compared to AE320, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. Staying
within that range gives nominal performance; driving the speaker beyond its maximum wattage can damage it.
AE320 Mark II and AE320 have the same power range of up to 200 watts.
Note that higher power handling does not make a speaker louder: that depends mainly on
sensitivity and impedance. The calculator below shows how loud each of these actually plays
on a real amplifier.
Which plays louder on your amplifier?
Starting with a popular amplifier - change it to the one you own, or any you are
considering, and watch both numbers move.
Cabinet Type and Port Position
Both AE320 Mark II and AE320 have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare AE320 Mark II's and AE320's external dimensions. AE320 Mark II has external dimensions of 1050.0 x 200.0 x 350.0mm (41.3 x 7.9 x 13.8inch) whereas AE320 has external dimensions of 1000.0 x 175.0 x 260.0mm (39.4 x 6.9 x 10.2inch).
AE320 Mark II is clearly the larger of the two speakers. Its body is 25mm wider, 50mm taller and 90mm deeper than AE320.
Size, drawn to scale
Both speakers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same surface and pushed back to the same wall, so the deeper one visibly sticks out further.
AE320 Mark II needs about 54% more floor or shelf area. AE320 Mark II is 90mm deeper, so it stands that much further out from the wall. AE320 Mark II is 50mm taller.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the AE320 Mark II is approximately 700.0cm2 / 108.5inch2 and base area of the AE320 is approximately 455.0cm2 / 70.5inch2. The AE320 Mark II requires 54% more surface area than the AE320 which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The AE320 Mark II weighs 26.00kg / 57.2lbs and the AE320 weighs 26.00kg / 57.2lbs.
Here is a comparison of how AE320 Mark II and AE320's weights compare with the average, max and min weights in Passive Floor-standing class.
Weight
All Floor-standing Speakers
Sensitivity |
92 dB
vs
90 dB
|
Play louder with same amount of amplification power |
Woofer Size |
6.5 inches
vs
5.2 inches
|
Larger woofer |
Low Frequency Response |
30 Hz
vs
35 Hz
|
Generates deeper bass |
Nominal Impedance |
8 ohms
vs
6 ohms
|
Less selective with amplifiers |
High Frequency Response |
30k Hz
vs
29k Hz
|
Generates higher frequency |
Height |
1000mm
vs
1050mm
|
Easier to fit in smaller spaces |
Base Surface Area |
455cm2
vs
700cm2
|
Takes less floor space |
Price per pair* |
2699USD
vs
3199USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
Acoustic Energy AE320 Mark II |
Acoustic Energy AE320 |
| Brand |
Acoustic Energy |
Acoustic Energy |
| Speaker Type |
Floor-standing speaker |
Floor-standing speaker |
| Power Range |
up to 200 watts |
up to 200 watts |
| Sensitivity |
92 dB |
90 dB |
| Impedance |
6 ohms |
8 ohms |
| Frequency Response |
30-29k Hz |
35Hz - 30kHz |
Drivers |
|
|
| Woofer Quantity |
2 |
2 |
| Woofer Size |
6.5" |
5.2" |
| Woofer Composition |
paper/coconut-fibre cone |
ceramic aluminium sandwich |
| Tweeter Size |
1.1" |
1.1" |
| Tweeter Type |
Dome |
dome with waveguide |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
5" |
5.2" |
| Crossover Frequency |
240Hz and 2.8kHz |
380Hz and 3400Hz |
| Firing Direction |
rear |
rear |
Physical Specs |
|
|
| Height |
1050.0mm (41.3") |
1000.0mm (39.4") |
| Width |
200.0mm (7.9") |
175.0mm (6.9") |
| Depth |
350.0mm (13.8") |
260.0mm (10.2") |
| Weight |
26.00kg (57.2lbs) |
26.00kg (57.2lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
18 mm RSC constrained-layer MDF/bitumen |
high density MDF |
| Available Colors |
Walnut,Silk-Touch Matte Black,Silk-Touch Matte White |
Piano Gloss White, Piano Gloss Black, Real Walnut wood veneer |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
|
|
| Labor Warranty |
|
|
A generation apart: AE320 Mark II is the newer design, against a 2017 model. Newer is not automatically better, but the older one is more likely to be discounted or near run-out.
| Area | Better | Why |
|---|
| Bass | A | AE320 Mark II digs deeper - 30Hz against 35Hz. A subwoofer would even that out. |
| Amplifier needs | A | AE320 Mark II is more sensitive (92dB vs 90dB), so it goes louder on the same amplifier. |
| Amplifier match | B | AE320 is the easier load at 8 ohms. |
| Headroom | evenly matched | Similar power handling (200W vs 200W). |
| Size | depends | AE320 is easier to place; AE320 Mark II is bigger, which usually goes with fuller bass. Your room decides. |
| Price | B | AE320 is cheaper - $2,699 against $3,199, about 16% less. |
A AE320 Mark II B AE320
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both speakers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
The usual trade-off: AE320 Mark II measures better, AE320 costs about about 19% more% less. Whether that gap is worth the money is the call only you can make - and in a normal room it is often smaller than the numbers suggest. If a subwoofer is in your plans, the bass gap largely stops mattering - you would be crossing over above 35Hz anyway, which makes the cheaper AE320 much easier to justify. Match it to your room: we rate AE320 Mark II the better fit for a very large room, and AE320 for a mid-size room.
And remember what a spec sheet cannot show: how each looks in your room and whether the finish suits it, what dealer support and warranty are like where you live, and how they actually sound to you. If you can hear them first - ideally with your own music - that will tell you more than any number above.