In this review, we will be comparing AE320 Mark II and Concord, two Passive Floor-standing speakers from Acoustic Energy and KLH.
Let's have a brief look at the main features
of AE320 Mark II and KLH Concord first before getting into our more
detailed comparison.
| Key Specs | AE320 Mark II | KLH Concord |
|---|
| Brand | Acoustic Energy United Kingdom · founded 1987 | KLH United States · founded 1957 |
|---|
| Design | 3-way | 2-way |
|---|
| Tweeter | 1.1" Dome | 1" |
|---|
| Midrange | 5" | — |
|---|
| Woofer | 2 x 6.5" paper/coconut-fibre cone | 2 x 6.5" Kevlar |
|---|
| Frequency response | 30-29k Hz | 28-23k Hz |
|---|
| Sensitivity | 92 dB | 94 dB |
|---|
| Impedance | 6 ohms | 8 ohms |
|---|
| Power range | up to 200 watts | up to 225 watts |
|---|
| Weight | 26.00kg / 57.2lbs | 20.45kg / 45lbs |
|---|
| Dimensions (H x W x D) | 41.3" x 7.9" x 13.8" 1050.0 x 200.0 x 350.0mm | 40-3/8" x 8-5/16" x 14-15/16" 1026.0 x 212.0 x 380.0mm |
|---|
The sections below take each area in turn: drivers, frequency response, physical size and what you get in the box.
Drivers
One of the fundamental differences between these two speakers is that AE320 Mark II is a 3-way design whereas the Concord is a 2-way speaker. 3-way designs utilize a midrange driver in addition to the tweeter and woofer on 2-way designs. Designing a crossover for a 3-way speaker is a complicated process and generally increases the overall cost of the speaker.
AE320 Mark IIKLH Concord
TweeterMidrangeWoofer
Front view, drawn to scale - cabinets and drivers share one scale, so sizes are directly comparable. Hover a driver for its size.
| Driver |
AE320 Mark II |
KLH Concord |
|
Driver Setup
|
3-way
|
2-way
|
|
Tweeter
|
1.1-inch
|
1-inch
|
|
Midrange
|
1 x 5-inch |
- |
|
Woofer
|
2 x 6.5-inch
|
2 x 6.5-inch
|
AE320 Mark II features a 1.1" fabric Dome Tweeter, a 5" Midrange and 2 x 6.5" paper/coconut-fibre cone Woofer with a Crossover frequency at 240Hz and 2.8kHz. On the other hand, the Concord features a 1" anodized aluminum Tweeter and 2 x 6.5" Kevlar Woofer.
Frequency Response
AE320 Mark II has a frequency range of 30-29k Hz whereas Concord has a frequency range of 28-23k Hz. With a minimum frequency of 28Hz, the Concord can go slightly deeper then the AE320 Mark II's min frequency of 30Hz.
The graph below depicts how these two speakers compare with the max, min and average Low Frequency values of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
Neither pair reaches down to 20Hz, the usual definition of full-range, which is normal for speakers of this size. If you want the bottom octave for movies or bass-heavy music, add a subwoofer to whichever you choose. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
AE320 Mark II is a 6 ohms speaker compared to the Concord which has a nominal impedance of 8 ohms.
These two speakers also have different sensitivity levels. AE320 Mark II sensitivity is rated at 92 dB and the Concord's is rated at 94 dB. This 2 dB difference makes the KLH Concord a more sensitive speaker compared to AE320 Mark II, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. Staying
within that range gives nominal performance; driving the speaker beyond its maximum wattage can damage it.
Concord can handle a max power of 225 watts RMS, whereas AE320 Mark II has a max power handling value of 200 watts RMS, 25 watts less than the Concord.
Note that higher power handling does not make a speaker louder: that depends mainly on
sensitivity and impedance. The calculator below shows how loud each of these actually plays
on a real amplifier.
Which plays louder on your amplifier?
Starting with a popular amplifier - change it to the one you own, or any you are
considering, and watch both numbers move.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare AE320 Mark II's and KLH Concord's external dimensions. AE320 Mark II has external dimensions of 1050.0 x 200.0 x 350.0mm (41.3 x 7.9 x 13.8inch) whereas KLH Concord has external dimensions of 1026.0 x 212.0 x 380.0mm (40-3/8 x 8-5/16 x 14-15/16inch).
AE320 Mark II is 12mm narrower and 30mm less deeper than KLH Concord but it is also 24mm taller.
Size, drawn to scale
Both speakers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same surface and pushed back to the same wall, so the deeper one visibly sticks out further.
KLH Concord needs about 15% more floor or shelf area. KLH Concord is 30mm deeper, so it stands that much further out from the wall. AE320 Mark II is 24mm taller.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the AE320 Mark II is approximately 700.0cm2 / 108.5inch2 and base area of the KLH Concord is approximately 805.6cm2 / 124.9inch2. The AE320 Mark II requires 13% less surface area than the Concord which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The AE320 Mark II weighs 26.00kg / 57.2lbs and the KLH Concord weighs 20.45kg / 45lbs. This makes the AE320 Mark II 27% heavier than the Concord.
Here is a comparison of how AE320 Mark II and Concord's weights compare with the average, max and min weights in Passive Floor-standing class.
Weight
All Floor-standing Speakers
What's in the Box of KLH Concord?
Here are the items that come with the Concord:
- Floorstanding loudspeaker
- Grille
- 4 Spike feet (w/ locking nut attached)
- 4 Protective discs
- 4 Rubber feet
- Port plug
- Manual
- ATTENTION! note
Driver Setup |
3-way
vs
2-way
|
Have a dedicated mid-range driver |
High Frequency Response |
29k Hz
vs
23k Hz
|
Generates higher frequency |
Base Surface Area |
700cm2
vs
805cm2
|
Takes less floor space |
Max Input Power |
225 watts
vs
200 watts
|
Handle more power from your amplifier |
Sensitivity |
94 dB
vs
92 dB
|
Play louder with same amount of amplification power |
Nominal Impedance |
8 ohms
vs
6 ohms
|
Less selective with amplifiers |
Low Frequency Response |
28 Hz
vs
30 Hz
|
Generates deeper bass |
Height |
1026mm
vs
1050mm
|
Easier to fit in smaller spaces |
Price per pair* |
1000USD
vs
3199USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
Acoustic Energy AE320 Mark II |
KLH Concord |
| Brand |
Acoustic Energy |
KLH |
| Speaker Type |
Floor-standing speaker |
Floor-standing speaker |
| Power Range |
up to 200 watts |
up to 225 watts |
| Sensitivity |
92 dB |
94 dB |
| Impedance |
6 ohms |
8 ohms |
| Frequency Response |
30-29k Hz |
28-23k Hz |
Drivers |
|
|
| Woofer Quantity |
2 |
2 |
| Woofer Size |
6.5" |
6.5" |
| Woofer Composition |
paper/coconut-fibre cone |
Kevlar |
| Woofer Surround Material |
n/a |
Butyl Rubber |
| Tweeter Size |
1.1" |
1" |
| Tweeter Type |
Dome |
n/a |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
5" |
No |
| Crossover Frequency |
240Hz and 2.8kHz |
n/a |
| Firing Direction |
rear |
n/a |
Physical Specs |
|
|
| Height |
1050.0mm (41.3") |
1026.0mm (40.4") |
| Width |
200.0mm (7.9") |
212.0mm (8.3") |
| Depth |
350.0mm (13.8") |
380.0mm (15") |
| Weight |
26.00kg (57.2lbs) |
20.45kg (45lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
18 mm RSC constrained-layer MDF/bitumen |
MDF/Wood-grain vinyl |
| Available Colors |
Walnut,Silk-Touch Matte Black,Silk-Touch Matte White |
Black |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
n/a |
No |
Other |
|
|
| Parts Warranty |
|
10 Years |
| Labor Warranty |
|
10 Years |
These sit in different price classes - AE320 Mark II costs roughly 3.2x what KLH Concord does. Expect it to lead on paper; the question is whether the gap is audible enough in your room to be worth it.
| Area | Better | Why |
|---|
| Bass | evenly matched | Much the same reach (30Hz vs 28Hz). |
| Amplifier needs | B | KLH Concord is more sensitive (94dB vs 92dB), so it goes louder on the same amplifier. |
| Amplifier match | B | KLH Concord is the easier load at 8 ohms. |
| Headroom | evenly matched | Similar power handling (200W vs 225W). |
| Size | depends | Similar cabinet size - neither is easier to fit. |
| Price | B | KLH Concord is cheaper - $1,000 against $3,199, about 69% less; arguably a different class. |
A AE320 Mark II B KLH Concord
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both speakers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
KLH Concord is the easier recommendation: it leads on most of the measured areas and costs less. Take AE320 Mark II if its size, looks or fit in your room suit you better. If your amplifier is modest, vintage or valve-based, KLH Concord is the safer partner - the other will want more current or more watts to sound its best. Think about the whole system, not just the speakers: the roughly $2,199 saved by taking the cheaper pair would buy a subwoofer or a better amplifier, and either usually does more for the sound than the difference between these two.
And remember what a spec sheet cannot show: how each looks in your room and whether the finish suits it, what dealer support and warranty are like where you live, and how they actually sound to you. If you can hear them first - ideally with your own music - that will tell you more than any number above.