Power needed
12–80 W
per channel, into 8 ohms
To hit 95 dB peaks at 3 m from a pair of Jamo S 805, you need at least 12 W a channel. More than 80 W is wasted here - that is all Jamo rates the speaker to take.
Show the working
- 95 dB target at the seat
- +4.8 dB for 3.0 m of distance
- -3 dB for a stereo pair
- -86.0 dB effective sensitivity
- 2 dB allowed for optimistic published sensitivity
- Published sensitivity 88 dB, used as 86.0 dB per watt.
Sonos Amp with the Jamo S 805
Workable with care
10 dB of headroom over what this speaker needs - peaks stay clean. Well above the 80 W the maker rates the speaker for, so keep an eye on the volume knob.
Rated down to 4 ohms, comfortable with an 8 ohm speaker.
Power nearly doubles into 4 ohms (125 W to 250 W) - a stiff supply that copes with hard loads.
Full Sonos Amp specs
·
Clear this amp
224 integrated amplifiers suit the Jamo S 805
Also show the 2 we do not recommend
1
Excellent match
9 dB of headroom over what this speaker needs - peaks stay clean.
Rated down to 3 ohms, comfortable with an 8 ohm speaker.
Power nearly doubles into 4 ohms (100 W to 200 W) - a stiff supply that copes with hard loads.
Balanced against the price of the speakers.
2
Excellent match
7 dB of headroom over what this speaker needs - peaks stay clean.
Rated down to 4 ohms, comfortable with an 8 ohm speaker.
Power nearly doubles into 4 ohms (60 W to 120 W) - a stiff supply that copes with hard loads.
Balanced against the price of the speakers.
3
Excellent match
7 dB of headroom over what this speaker needs - peaks stay clean.
Rated down to 4 ohms, comfortable with an 8 ohm speaker.
Power nearly doubles into 4 ohms (60 W to 120 W) - a stiff supply that copes with hard loads.
Balanced against the price of the speakers.
4
Excellent match
7 dB of headroom over what this speaker needs - peaks stay clean.
Rated down to 4 ohms, comfortable with an 8 ohm speaker.
Power nearly doubles into 4 ohms (60 W to 120 W) - a stiff supply that copes with hard loads.
Balanced against the price of the speakers.
5
Excellent match
6 dB of headroom over what this speaker needs - peaks stay clean.
Rated down to 4 ohms, comfortable with an 8 ohm speaker.
Power nearly doubles into 4 ohms (50 W to 100 W) - a stiff supply that copes with hard loads.
Sensible value pick against these speakers.
6
Good match
9 dB of headroom over what this speaker needs - peaks stay clean.
Rated down to 4 ohms, comfortable with an 8 ohm speaker.
Barely gains into 4 ohms (90 W to 120 W) - a modest power supply.
Balanced against the price of the speakers.
7
Excellent match
8 dB of headroom over what this speaker needs - peaks stay clean.
Rated down to 4 ohms, comfortable with an 8 ohm speaker.
Power nearly doubles into 4 ohms (75 W to 150 W) - a stiff supply that copes with hard loads.
Costs more than the speakers - worth it only if you plan to upgrade them later.
8
Good match
7 dB of headroom over what this speaker needs - peaks stay clean.
Rated down to 4 ohms, comfortable with an 8 ohm speaker.
Power rises usefully into 4 ohms (60 W to 100 W).
Balanced against the price of the speakers.
9
Excellent match
7 dB of headroom over what this speaker needs - peaks stay clean.
Rated down to 4 ohms, comfortable with an 8 ohm speaker.
Power nearly doubles into 4 ohms (55 W to 105 W) - a stiff supply that copes with hard loads.
Costs more than the speakers - worth it only if you plan to upgrade them later.
10
Workable with care
10 dB of headroom over what this speaker needs - peaks stay clean. Well above the 80 W the maker rates the speaker for, so keep an eye on the volume knob.
Rated down to 4 ohms, comfortable with an 8 ohm speaker.
Power nearly doubles into 4 ohms (125 W to 250 W) - a stiff supply that copes with hard loads.
Costs more than the speakers - worth it only if you plan to upgrade them later.
11
Good match
7 dB of headroom over what this speaker needs - peaks stay clean.
Rated down to 4 ohms, comfortable with an 8 ohm speaker.
Barely gains into 4 ohms (60 W to 70 W) - a modest power supply.
Balanced against the price of the speakers.
12
Excellent match
7 dB of headroom over what this speaker needs - peaks stay clean.
Rated down to 4 ohms, comfortable with an 8 ohm speaker.
Power nearly doubles into 4 ohms (60 W to 110 W) - a stiff supply that copes with hard loads.
Costs more than the speakers - worth it only if you plan to upgrade them later.
13
Excellent match
9 dB of headroom over what this speaker needs - peaks stay clean.
Rated down to 4 ohms, comfortable with an 8 ohm speaker.
Power nearly doubles into 4 ohms (100 W to 200 W) - a stiff supply that copes with hard loads.
Costs more than the speakers - worth it only if you plan to upgrade them later.
14
Excellent match
9 dB of headroom over what this speaker needs - peaks stay clean.
Rated down to 4 ohms, comfortable with an 8 ohm speaker.
Power nearly doubles into 4 ohms (100 W to 200 W) - a stiff supply that copes with hard loads.
Costs more than the speakers - worth it only if you plan to upgrade them later.
15
Workable with care
11 dB of headroom over what this speaker needs - peaks stay clean. Well above the 80 W the maker rates the speaker for, so keep an eye on the volume knob.
Rated down to 4 ohms, comfortable with an 8 ohm speaker.
No 4 ohm power rating on file, so we cannot judge current delivery.
Sensible value pick against these speakers.
16
Excellent match
8 dB of headroom over what this speaker needs - peaks stay clean.
Rated down to 4 ohms, comfortable with an 8 ohm speaker.
Power nearly doubles into 4 ohms (75 W to 150 W) - a stiff supply that copes with hard loads.
Costs more than the speakers - worth it only if you plan to upgrade them later.
17
Excellent match
8 dB of headroom over what this speaker needs - peaks stay clean.
Rated down to 4 ohms, comfortable with an 8 ohm speaker.
Power nearly doubles into 4 ohms (75 W to 150 W) - a stiff supply that copes with hard loads.
Costs more than the speakers - worth it only if you plan to upgrade them later.
18
Good match
6 dB of headroom over what this speaker needs - peaks stay clean.
Rated down to 4 ohms, comfortable with an 8 ohm speaker.
Rated at the same 50 W into 4 ohms as into 8 - the power supply runs out before the load does.
Balanced against the price of the speakers.
19
Good match
9 dB of headroom over what this speaker needs - peaks stay clean.
Rated down to 4 ohms, comfortable with an 8 ohm speaker.
No 4 ohm power rating on file, so we cannot judge current delivery.
Costs more than the speakers - worth it only if you plan to upgrade them later.
20
Excellent match
8 dB of headroom over what this speaker needs - peaks stay clean.
Rated down to 4 ohms, comfortable with an 8 ohm speaker.
Power nearly doubles into 4 ohms (76 W to 135 W) - a stiff supply that copes with hard loads.
Far more expensive than the speakers. Spend it on speakers first.
Showing the best 20 of 224. Narrow it with the price range below, or a different budget split.
67 power amplifiers that would also drive them
Listed separately because they are not a complete system: a power amplifier has no volume control and no inputs to speak of, so you need a preamplifier or a streaming preamp as well. Worth it if you already own one, or if you want to buy the two halves separately.
1
Good match
8 dB of headroom over what this speaker needs - peaks stay clean.
Rated down to 4 ohms, comfortable with an 8 ohm speaker.
Power rises usefully into 4 ohms (70 W to 125 W).
Costs more than the speakers - worth it only if you plan to upgrade them later.
2
Good match
9 dB of headroom over what this speaker needs - peaks stay clean.
Has a 8 ohm tap, which is exactly what this 8 ohm speaker wants. Taps: 4 / 8 ohm.
A valve amplifier makes the same power on each tap, so what matters is sensitivity - and at 86.0 dB this speaker is efficient enough that 100 W is comfortable.
Far more expensive than the speakers. Spend it on speakers first.
3
Good match
9 dB of headroom over what this speaker needs - peaks stay clean.
Rated down to 2 ohms - stable into anything this speaker will throw at it.
Power nearly doubles into 4 ohms (100 W to 190 W) - a stiff supply that copes with hard loads.
Far more expensive than the speakers. Spend it on speakers first.
4
Good match
8 dB of headroom over what this speaker needs - peaks stay clean.
Has a 8 ohm tap, which is exactly what this 8 ohm speaker wants. Taps: 4 / 8 / 16 ohm.
A valve amplifier makes the same power on each tap, so what matters is sensitivity - and at 86.0 dB this speaker is efficient enough that 70 W is comfortable.
Far more expensive than the speakers. Spend it on speakers first.
5
Workable with care
12 dB of headroom over what this speaker needs - peaks stay clean. Well above the 80 W the maker rates the speaker for, so keep an eye on the volume knob.
Rated down to 2 ohms - stable into anything this speaker will throw at it.
No 4 ohm power rating on file, so we cannot judge current delivery.
Sensible value pick against these speakers.
6
Workable with care
10 dB of headroom over what this speaker needs - peaks stay clean. Well above the 80 W the maker rates the speaker for, so keep an eye on the volume knob.
Rated down to 4 ohms, comfortable with an 8 ohm speaker.
Power nearly doubles into 4 ohms (125 W to 250 W) - a stiff supply that copes with hard loads.
Far more expensive than the speakers. Spend it on speakers first.
7
Workable with care
11 dB of headroom over what this speaker needs - peaks stay clean. Well above the 80 W the maker rates the speaker for, so keep an eye on the volume knob.
Rated down to 2 ohms - stable into anything this speaker will throw at it.
Power nearly doubles into 4 ohms (150 W to 300 W) - a stiff supply that copes with hard loads.
Far more expensive than the speakers. Spend it on speakers first.
8
Workable with care
12 dB of headroom, far more than needed. No harm in it. Well above the 80 W the maker rates the speaker for, so keep an eye on the volume knob.
Rated down to 4 ohms, comfortable with an 8 ohm speaker.
No 4 ohm power rating on file, so we cannot judge current delivery.
No current price on file for this amplifier.
Were these amplifier recommendations useful?
It helps us tune the matching, and we read every comment.
Thanks. Anything you would add?
Optional, and it goes straight to the person who maintains this page.
Thanks - noted.
Sensitivity and impedance figures are the manufacturer's own. We read sensitivity as dB at 2.83 V/1 m and take 2 dB off it, because published figures run high. Treat the result as a well-founded starting point, not a measurement. Full Jamo S 805 specs.
More tools
💰
System Budget Planner
Split a total across speakers, amplifier and subwoofer, then fill every slot with real models that work together.
📏️Will It Fit? Speaker Size Finder
Measure your shelf or alcove and see every speaker that goes in it, with a warning where a rear port needs more room than the box does.
🔌Speaker Wire Gauge Calculator
How thick your speaker cable needs to be for the run length and impedance, and what you lose if it is too thin.
⚡Speaker Impedance Calculator
Wire two or more speakers in series or parallel and see the load your amplifier actually sees.
📏Speaker Placement Calculator
A plan view of your room: speaker spacing, wall distances, where the bass cancels and where the first reflection lands.
🎸Subwoofer Crossover Calculator
Where to set the crossover between your speakers and a subwoofer, and which reason is driving the answer.
🎧Speaker Test Tones
Channel check, polarity, bass extension and frequency sweeps, generated in your browser. Nothing to download.
🏠Room Mode Calculator
The frequencies your room reinforces and cancels, where they pile up, and what to move first.
📣SPL & Amplifier Power Calculator
How loud a speaker plays for a given power at a given distance - or how many watts you need for a target level.