Sonus faber Aida is a 4-way Passive Bass Reflex Floor-standing speaker by Sonus faber. It was released in December 2017. It features a 1.1" Soft-Dome Tweeter, 1 x 7" Midrange and 1 x 12.5" Paper Woofer.
A 3.5-way ported floorstander with a 1.1 inch tweeter, a 7 inch midrange, 2 x 8.5 inch woofers and a 12.5 inch infra-woofer. 92 dB sensitive, 4 ohms, 100-1000 W recommended, 18 Hz to 35 kHz. Reference is the top of the range: double-curvature lute cabinets and Sonus faber's own XTR driver family.
The speaker has a frequency range of 18-35k Hz and a sensitivity of 92 dB. Sonus faber Aida has an MSRP of 130000$ per pair.
Room Size Suitability
The size of the room where you plan to use the Sonus faber Aida is a crucial factor in your decision. We have assessed its suitability for various room sizes based on its dimensions and maximum power output:
| Listening Environment* |
Suitability |
| Near-field | Are you nuts? |
| Small Room | Poor |
| Mid-size Room | Average |
| Large Room | Good |
| Very Large Room | Good |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2, Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: > 400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual listening experience changes depending on floor height, room shape, surface materials, listening position, speaker locations, etc.)
Sonus faber's Reference Series of Loudspeakers
Aida is a member of Sonus faber's Reference series of Passive speakers. Below you can see the main specs of these speakers.
See all 4 Sonus faber Reference models compared »
Sonus faber Reference Series Speakers
**This post contains affiliate links, and we will be compensated if you make a purchase after clicking through our links. As an Amazon Associate I earn from qualifying purchases.
Frequency Response of the Sonus faber Aida Speaker
Sonus faber Aida has a Frequency response range of 18-35k Hz and Power Range of 100-1000 watts. With a minimum frequency of 18 Hz, Aida delivers deep bass that will likely satisfy most listeners, especially those who enjoy music. However, movie enthusiasts and music fans who prefer a full range of sound may still benefit from adding a subwoofer.
Here we have a comparison of how Aida's Low frequency value compares with the average, max and min Low frequency values in its class.
Low Frequency
Floor-standing Speakers
Thinking about a subwoofer for the Sonus faber Aida?
Crossover frequency of the Sonus faber Aida?
The crossover points of the Aida are set at 55, 150, 200, 3000 Hz.
Impedance and Sensitivity
Sonus faber Aida's nominal impedance level is
4 ohms and has a sensitivity of
92 dB.
Sensitivity
Floor-standing Speakers
Nominal Impedance of the 4 Ohms means that the Sonus faber Aida is a difficult to drive speaker from nominal Impedance perspective, make sure that you choose an amplifier than can provide 4 Ohms for this speaker.
Many AVRs (audio/video receiver) in the market may have difficulty when the speakers dip below the 4 Ohms levels (this may cause clipping or even physical damage), so we recommend to not pair the Sonus faber Aida with an AVR but use an Integrated Amplifier instead.
Sensitivity
92dB of the Sonus faber Aida is considered a high sensitivity compared to average stereo speaker which makes Aida an easy to drive from Sensitivity perspective. If you are planning to power your speaker with a Tube amp which are generally very low power, the Sonus faber Aida will be a good choice. Work out how loud the Sonus faber Aida plays in your room →
Running more than one pair from a single amplifier? Check the load it would present →
What amplifier does the Sonus faber Aida need?
At normal listening levels in a medium room, about
9.5–150 W
per channel into 4 ohms.
Set your own conditions and we will rank every amplifier we cover.
Prefer to browse? See every integrated amplifier we cover.
Input Type
Aida features Binding post type connectors. Bi-amping and Bi-wiring are not possible.
Work out what gauge speaker cable this run needs →
Sonus faber Aida External Dimensions and Weight
Sonus faber Aida has external dimensions of (Height x Width x Depth) 67-15/16 x 19 x 30-11/16inch (1725.0 x 482.0 x 780.0mm ).
Base Surface Area
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base area of Sonus faber Aida is approximately 3759.6cm2 / 582.7inch2.
Find speakers that fit your shelf or alcove → · Work out where they should sit in the room →
WeightThe Sonus faber Aida weighs 165.00kg / 363lbs per piece. Here is a comparison of how Aida's weight compares with the average, max and min weights in its class.
Weight
All Floor-standing Speakers
Weight
Floor-standing Speakers under $30000
Cabinet type and Materials
Sonus faber Aida has a
Bass Reflex type cabinet. Bass Reflex type loudspeakers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs.
Does the Sonus faber Aida come with a Grille?
Aida comes with grilles. The purpose of the grille is to protect the delicate driver elements from external impacts while still allowing the sound to pass as clearly as possible.
Recommended Accessories
Here is a list of accessories that we think you may need for the Sonus faber Aida.
Official Product Page
Official manufacturer's product page for the Sonus faber Aida speaker can be found below:
Official Product Page for Sonus faber Aida