Fyne Audio F1-10S is a 2-way Passive Bass Reflex Floor-standing speaker by Fyne Audio. It was released in 2023. It features a Tweeter and x " Woofer.
1 x 9.84" (250 mm) IsoFlare point source driver, multi-fiber bass/ midrange cone, FyneFlute surround with 75 mm magnesium dome compression tweeter, ne
The speaker has a frequency range of 26-26k Hz and a sensitivity of 94 dB. Fyne Audio F1-10S has an MSRP of 38499$ per pair.
Room Size Suitability
The size of the room where you plan to use the Fyne Audio F1-10S is a crucial factor in your decision. We have assessed its suitability for various room sizes based on its dimensions and maximum power output:
| Listening Environment* |
Suitability |
| Near-field | Bad |
| Small Room | Poor |
| Mid-size Room | Average |
| Large Room | Good |
| Very Large Room | Average |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2, Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: > 400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual listening experience changes depending on floor height, room shape, surface materials, listening position, speaker locations, etc.)
**This post contains affiliate links, and we will be compensated if you make a purchase after clicking through our links. As an Amazon Associate I earn from qualifying purchases.
Frequency Response of the Fyne Audio F1-10S Speaker
Fyne Audio F1-10S has a Frequency response range of 26-26k Hz at ±3dB. With a minimum frequency of 26 Hz, F1-10S delivers deep bass that will likely satisfy most listeners, especially those who enjoy music. However, movie enthusiasts and music fans who prefer a full range of sound may still benefit from adding a subwoofer.
Here we have a comparison of how F1-10S's Low frequency value compares with the average, max and min Low frequency values in its class.
Low Frequency
Floor-standing Speakers
Thinking about a subwoofer for the Fyne Audio F1-10S?
Among the speakers in our database with a max MSRP price of 30000$ (Pair), these are the 2 Passive Floor-standing speakers that have the deeper bass levels than the Fyne Audio F1-10S's 26Hz:
Crossover frequency of the Fyne Audio F1-10S?
The crossover frequency of the F1-10S is set to 750 Hz. This is the threshold frequency where the higher frequency signals over this level are sent to the tweeter and the lower-frequency signals are sent to the woofer by the crossover component.
Impedance and Sensitivity
Fyne Audio F1-10S's nominal impedance level is
8 ohms and has a sensitivity of
94 dB.
Sensitivity
Floor-standing Speakers
8 Ohms is pretty much the standard nominal impedance amongst stereo speakers and amplifiers so Fyne Audio F1-10S is not considered a difficult to drive speaker from nominal Impedance perspective.
Sensitivity
94dB of the Fyne Audio F1-10S is considered a high sensitivity compared to average stereo speaker which makes F1-10S an easy to drive from Sensitivity perspective. If you are planning to power your speaker with a Tube amp which are generally very low power, the Fyne Audio F1-10S will be a good choice. Work out how loud the Fyne Audio F1-10S plays in your room →
What amplifier does the Fyne Audio F1-10S need?
At normal listening levels in a medium room, about
3.0–60 W
per channel into 8 ohms.
Set your own conditions and we will rank every amplifier we cover.
Prefer to browse? See every integrated amplifier we cover.
Input Type
F1-10S features Binding post type connectors. Bi-amping and Bi-wiring are not possible.
Work out what gauge speaker cable this run needs →
Fyne Audio F1-10S External Dimensions and Weight
Fyne Audio F1-10S has external dimensions of (Height x Width x Depth) 46.9 x 15.9 x 22.9inch (1191.3 x 403.9 x 581.7mm ).
Base Surface Area
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base area of Fyne Audio F1-10S is approximately 2349.5cm2 / 364.2inch2.
Find speakers that fit your shelf or alcove → · Work out where they should sit in the room →
WeightThe Fyne Audio F1-10S weighs 57.70kg / 126.9lbs per piece. Here is a comparison of how F1-10S's weight compares with the average, max and min weights in its class.
Weight
All Floor-standing Speakers
Weight
Floor-standing Speakers under $30000
Cabinet type and Materials
Fyne Audio F1-10S has a
Bass Reflex type cabinet. Bass Reflex type loudspeakers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs.
Does the Fyne Audio F1-10S come with a Grille?
F1-10S comes with grilles. The purpose of the grille is to protect the delicate driver elements from external impacts while still allowing the sound to pass as clearly as possible.
Recommended Accessories
Here is a list of accessories that we think you may need for the Fyne Audio F1-10S.
Official Product Page
Official manufacturer's product page for the Fyne Audio F1-10S speaker can be found below:
Official Product Page for Fyne Audio F1-10S