ELAC Uni-Fi Reference UBR62 is a 3-way Passive Bass Reflex Bookshelf speaker designed by Andrew Jones for ELAC. It was released in 2020. It features a 1" soft dome Tweeter, 1 x 4" Midrange and 1 x 6.5" Aluminum Woofer. The speaker has a frequency range of 41-35k Hz and a sensitivity of 85 dB. ELAC Uni-Fi Ref UBR62 has an MSRP of 1200$ per pair.
Room Size Suitability
The size of the room where you plan to use the ELAC Uni-Fi Ref UBR62 is a crucial factor in your decision. We have assessed its suitability for various room sizes based on its dimensions and maximum power output:
| Listening Environment* |
Suitability |
| Near-field | Poor |
| Small Room | Average |
| Mid-size Room | Good |
| Large Room | Average |
| Very Large Room | Poor |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2, Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: > 400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual listening experience changes depending on floor height, room shape, surface materials, listening position, speaker locations, etc.)
ELAC Uni-Fi Ref UBR62 Lifestyle
ELAC's Uni-Fi Reference Series of Loudspeakers
UBR62 is a member of ELAC's Uni-Fi Reference series of Passive speakers. Uni-Fi Reference is the upgraded flagship of ELAC's Uni-Fi line, with premium drivers and crossovers. Below you can see the main specs of these speakers.
ELAC Uni-Fi Reference Series Speakers
ELAC Uni-Fi Reference Series Speakers
**This post contains affiliate links, and we will be compensated if you make a purchase after clicking through our links. As an Amazon Associate I earn from qualifying purchases.
Frequency Response of the ELAC Uni-Fi Ref UBR62 Speaker
ELAC Uni-Fi Ref UBR62 has a Frequency response range of 41-35k Hz and Power Range of up to 140 watts. With a minimum frequency of 41 Hz, UBR62 delivers deep bass that will likely satisfy most listeners, especially those who enjoy music. However, movie enthusiasts and music fans who prefer a full range of sound may still benefit from adding a subwoofer.
Here we have a comparison of how UBR62's Low frequency value compares with the average, max and min Low frequency values in its class.
Low Frequency
Bookshelf Speakers
Thinking about a subwoofer for the ELAC Uni-Fi Ref UBR62?
ELAC Uni-Fi Ref UBR62's Aluminum Woofer
ELAC Uni-Fi Ref UBR62's soft dome Tweeter
Impedance and Sensitivity
ELAC Uni-Fi Ref UBR62's nominal impedance level is
6 ohms and has a sensitivity of
85 dB.
Sensitivity
Bookshelf Speakers
Nominal Impedance of the 6 Ohms makes the ELAC Uni-Fi Reference UBR62 a relatively difficult to drive speaker compared to more frequently found 8 ohms speakers from nominal Impedance perspective.
Sensitivity
With a sensitivity level of only 85 dB, ELAC Uni-Fi Reference UBR62 is a difficult to drive speaker from Sensitivity perspective, make sure to choose an amplifier with a high output if you like listening to your music at high volume levels. You may especially have a hard time using Tube amplifiers which are traditionally very low power compared to Class A/B or Class D amps. Work out how loud the ELAC Uni-Fi Ref UBR62 plays in your room →
Running more than one pair from a single amplifier? Check the load it would present →
What amplifier does the ELAC Uni-Fi Ref UBR62 need?
At normal listening levels in a medium room, about
32–140 W
per channel into 6 ohms.
Set your own conditions and we will rank every amplifier we cover.
Prefer to browse? Integrated amplifiers under $1,500, or every amplifier we cover.
Input Type
UBR62 has Binding post type connectors and lets bi-amping/bi-wiring. Bi-wiring can enhance the overall transparency of your loudspeakers by using separate speaker wires for the low and high-frequency drivers from a single amplifier. Bi-amping, on the other hand, involves using separate amplifiers for the high and low-frequency drivers, potentially resulting in a greater dynamic range and reduced distortion.
Work out what gauge speaker cable this run needs →
ELAC Uni-Fi Ref UBR62 Back View
ELAC Uni-Fi Ref UBR62 External Dimensions and Weight
ELAC Uni-Fi Ref UBR62 has external dimensions of (Height x Width x Depth) 14-1/8 x 8-1/4 x 13-1/16inch (359.0 x 210.0 x 332.0mm ).
Base Surface Area
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base area of ELAC Uni-Fi Ref UBR62 is approximately 697.2cm2 / 108.1inch2.
To get a better perspective on the real life size of ELAC Uni-Fi Ref UBR62, let's compare it with a standard size Compact Disc which has a diameter of 4.7inch (120mm).
ELAC Uni-Fi Ref UBR62 Speaker Size Compared to a Compact Disc
Here we place the ELAC Uni-Fi Ref UBR62 virtually next to a standard width amplifier and turntable on a BDI Octave Media Cabinet to get a better idea about the size.
ELAC Uni-Fi Ref UBR62 Speaker next to an amplifier and turntable
Find speakers that fit your shelf or alcove → · Work out where they should sit in the room →
WeightThe ELAC Uni-Fi Ref UBR62 weighs 10.70kg / 23.5lbs per piece. Here is a comparison of how UBR62's weight compares with the average, max and min weights in its class.
Weight
All Bookshelf Speakers
Weight
Bookshelf Speakers under $1500
Cabinet type and Materials
ELAC Uni-Fi Ref UBR62 has a
Bass Reflex type cabinet and a MDF/Wood-grain vinyl finish. Bass Reflex type loudspeakers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs.
Available colors
ELAC Uni-Fi Ref UBR62 is available in Satin Black with Walnut Sides and Satin White with Oak Sides.
Wall Mounting
UBR62 doesn't sport any built-in mounting bracket, so you need an external structure to mount it on walls.
Does the ELAC Uni-Fi Ref UBR62 come with a Grille?
UBR62 comes with magnetic cloth grilles. The purpose of the grille is to protect the delicate driver elements from external impacts while still allowing the sound to pass as clearly as possible.
ELAC Uni-Fi Ref UBR62 with Grille
What's in the Box of ELAC Uni-Fi Ref UBR62?
Here are the items that are included inside the box of UBR62:
- 2 Bookshelf loudspeakers
- 2 Grilles
- 4 Jumper-bars (pre-installed)
- Operating Instructions
Recommended Accessories
Here is a list of accessories that we think you may need for the ELAC Uni-Fi Reference UBR62.
- Speaker Cable and Connectors
- Vibration Isolators: IsoAcoustics isolators are our favorite isolators but you may find more affordable options too.
- Acoustic Panels and Treatments: Your room is as important as your stereo equipment so acoustic treatments goes a long way in improving the overall performance.
- Speaker Stands: Stands bring your bookshelf speakers to ideal height (rule of thumb is to have the tweeter level with your ear in your listening position), helps stability and acoustical isolation.
User's Manual
For more information about how to setup, use and maintain the ELAC Uni-Fi Reference UBR62, use the direct link below to download the official manual document:
Download User Manual for ELAC Uni-Fi Ref UBR62
Official Product Page
Official manufacturer's product page for the ELAC Uni-Fi Reference UBR62 speaker can be found below:
Official Product Page for ELAC Uni-Fi Ref UBR62
Warranty
3 Years of parts warranty and 3 Years of labor warranty is generally provided by the manufacturer.
Related Videos