In this review, we will be comparing UBR62 and Silver 100 7G, two Passive Bookshelf speakers from ELAC and Monitor Audio. Let's have a brief look at the main features
of ELAC Uni-Fi Ref UBR62 and Monitor Audio Silver 100 7G first before getting into our more
detailed comparison.
What size room are the ELAC Uni-Fi Ref UBR62 and Monitor Audio Silver 100 7G speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the ELAC Uni-Fi Ref UBR62 and Monitor Audio Silver 100 7G compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
One of the fundamental differences between these two speakers is that UBR62 is a 3-way design whereas the Silver 100 7G is a 2-way speaker. 3-way designs utilize a midrange driver in addition to the tweeter and woofer on 2-way designs. Designing a crossover for a 3-way speaker is a complicated process and generally increases the overall cost of the speaker.
Driver |
ELAC Uni-Fi Ref UBR62 |
Monitor Audio Silver 100 7G |
Driver Setup
|
3-way
|
2-way
|
Tweeter
|
1-inch
|
1-inch
|
Midrange
|
1 x 4-inch |
- |
Woofer
|
1 x 6.5-inch
|
1 x 8-inch
|
UBR62 features a 1" soft dome Tweeter , a 4" Midrange and 1 x 6.5" Aluminum Woofer . On the other hand, the Silver 100 7G features a 1" Hard-Dome Tweeter and 1 x 8" C-CAM RST II Woofer .
Frequency Response
UBR62 has a frequency range of 41-35k Hz whereas Silver 100 7G has a frequency range of 35-35k Hz. With a minimum frequency of 35Hz, the Silver 100 7G can go significantly deeper on the low side and provide stronger bass compared to the UBR62's min frequency of 41Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
Monitor Audio Silver 100 7G
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
UBR62 is a 6 ohms speaker compared to the Silver 100 7G which has a nominal impedance of 8 ohms.
These two speakers also have different sensitivity levels. UBR62 sensitivity is rated at 85 dB and the Silver 100 7G's is rated at 87.5 dB. This 3 dB difference makes the Monitor Audio Silver 100 7G a more sensitive speaker compared to ELAC Uni-Fi Ref UBR62, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
UBR62 can handle a max power of 140 watts RMS from the amp the whereas Silver 100 7G has a max power handling value of 120 watts RMS, 20 watts less than the UBR62.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Both UBR62 and Silver 100 7G features dual binding post speaker terminals for bi-amping or bi-wiring.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare ELAC Uni-Fi Ref UBR62's and Monitor Audio Silver 100 7G's external dimensions. ELAC Uni-Fi Ref UBR62 has external dimensions of 359.0 x 210.0 x 332.0mm ( 14-1/8 x 8-1/4 x 13-1/16inch) whereas Monitor Audio Silver 100 7G has external dimensions of 377.0 x 232.0 x 332.0mm ( 14-13/16 x 9-1/8 x 13-1/16inch) .
Below you can see the front view size comparison of ELAC Uni-Fi Ref UBR62 and Monitor Audio Silver 100 7G in scale.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the ELAC Uni-Fi Ref UBR62 is approximately 697.2cm2 / 108.1inch2 and base area of the Monitor Audio Silver 100 7G is approximately 770.2cm2 / 119.4inch2. The UBR62 requires 9% less surface area than the Silver 100 7G which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The ELAC Uni-Fi Ref UBR62 weighs 10.70kg / 23.5lbs and the Monitor Audio Silver 100 7G weighs 9.43kg / 20.7lbs. This makes the UBR62 13% heavier than the Silver 100 7G.
Here is a comparison of how UBR62 and Silver 100 7G's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
Monitor Audio Silver 100 7G
What's in the Box of ELAC Uni-Fi Ref UBR62?
Here are the items that are included inside the box of UBR62:
2 Bookshelf loudspeakers2 Grilles4 Jumper-bars (pre-installed)Operating Instructions
What's in the Box of Monitor Audio Silver 100 7G?
Here are the items that come with the Silver 100 7G:
2 Bookshelf loudspeakers2 Grilles4 Jumpers (pre-installed)8 Rubber feet2 Foam port plugsHex-keyOwners ManualImportant Safety Instructions
Max Input Power |
140 watts
vs
120 watts
|
Handle more power from your amplifier |
Driver Setup |
3-way
vs
2-way
|
Have a dedicated mid-range driver |
Base Surface Area |
697cm2 (210x332mm)
vs
770cm2 (232x332mm)
|
Takes less floor space |
Price per pair* |
1200USD
vs
1400USD
|
costs less (*prices may change depending on the seller, location and time) |
Sensitivity |
88 dB
vs
85 dB
|
Play louder with same amount of amplification power |
Nominal Impedance |
8 ohms
vs
6 ohms
|
Less selective with amplifiers |
Woofer Size |
8 inches
vs
6.5 inches
|
Larger woofer |
Low Frequency Response |
35 Hz
vs
41 Hz
|
Generates deeper bass |
General |
ELAC Uni-Fi Reference UBR62 |
Monitor Audio Silver 100 7G |
Brand |
ELAC |
Monitor Audio |
Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
Power Range |
up to 140 watts |
40-120 watts |
Sensitivity |
85 dB |
87.5 dB |
Impedance |
6 ohms |
8 ohms |
Frequency Response |
41-35k Hz |
35-35k Hz |
Drivers |
|
|
Woofer Quantity |
1 |
1 |
Woofer Size |
6.5" |
8" |
Woofer Composition |
Aluminum |
C-CAM RST II |
Woofer Surround Material |
Rubber |
Rubber |
Tweeter Size |
1" |
1" |
Tweeter Type |
soft dome |
Hard-Dome |
Aimable Tweeter |
No |
No |
Midrange Driver |
4" |
No |
Physical Specs |
|
|
Height |
377.0mm (14.8") |
377.0mm (14.8") |
Width |
210.0mm (8.3") |
232.0mm (9.1") |
Depth |
332.0mm (13.1") |
332.0mm (13.1") |
Weight |
10.70kg (23.5lbs) |
9.43kg (20.7lbs) |
Enclosure |
Bass Reflex |
Bass Reflex |
Finish |
MDF/Wood-grain vinyl |
MDF/Wood veneer |
Available Colors |
Satin Black with Walnut Sides, Satin White with Oak Sides |
Ash,High Gloss Black,Black Oak,Satin White |
Mounting Bracket |
No |
No |
Recommended Stand Height |
22-24" |
22-26" |
Grille |
Yes |
Yes |
Moisture Resistancy |
No |
No |
Connections |
|
|
Biamp Inputs |
Yes |
Yes |
Other |
|
|
Parts Warranty |
3 Years |
5 Years |
Labor Warranty |
3 Years |
5 Years |