In this review, we will be comparing two different type of speakers by ELAC. ELAC Uni-Fi Reference UBR62 is a Bookshelf speaker whereas the UFR52 is a Floor-standing speaker.
Let's have a brief look at the main features
of ELAC Uni-Fi Ref UBR62 and ELAC Uni-Fi Ref UFR52 first before getting into our more
detailed comparison.
ELAC Uni-Fi Ref UBR62 Key Specs
- 3-way Design
- 1" soft dome Tweeter
- 4" Midrange
- 6.5" Aluminum Woofer
- 41-35k Hz Frequency Response
- 85 dB Sensitivity
- Impedance: 6ohms
- Power Range:up to 140watts
- Weight:10.70kg
- Dimensions (H x W x D): 359.0" x 8-1/4" x 13-1/16"( 359.0 x 210.0 x 332.0mm )
ELAC Uni-Fi Ref UFR52 Key Specs
- 3-way Design
- 1" soft dome Tweeter
- 4" Midrange
- 3 x 5.25" Aluminum Woofer
- 4" Midrange
- 40-35k Hz Frequency Response
- 86 dB Sensitivity
- Impedance: 6ohms
- Power Range:up to 140watts
- Weight:23.80kg
- Dimensions (H x W x D): 1005.0" x 9-1/4" x 13-5/16"( 1005.0 x 235.0 x 339.0mm )
UBR62 and UFR52 are members of ELAC's Uni-Fi Reference series of speakers. Below you can find the loudspeakers from this series.
ELAC Uni-Fi Reference Series
History
What size room are the ELAC Uni-Fi Ref UBR62 and ELAC Uni-Fi Ref UFR52 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
ELAC Uni-Fi Ref UBR62 |
ELAC Uni-Fi Ref UFR52 |
| Near-field |
Poor |
Bad |
| Small Room |
Average |
Poor |
| Mid-size Room |
Good |
Good |
| Large Room |
Average |
Good |
| Very Large Room |
Poor |
Poor |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the ELAC Uni-Fi Ref UBR62 and ELAC Uni-Fi Ref UFR52 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both UBR62 and UFR52 are 3-way speakers.
| Driver |
ELAC Uni-Fi Ref UBR62 |
ELAC Uni-Fi Ref UFR52 |
|
Driver Setup
|
3-way
|
3-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
1 x 4-inch |
1 x 4-inch |
|
Woofer
|
1 x 6.5-inch
|
3 x 5.25-inch
|
UBR62 features a 1" soft dome Tweeter , a 4" Midrange and 1 x 6.5" Aluminum Woofer . On the other hand, the UFR52 features a 1" soft dome Tweeter , a 4" Midrange and 3 x 5.25" Aluminum Woofer .
Frequency Response
UBR62 has a frequency range of 41-35k Hz whereas UFR52 has a frequency range of 40-35k Hz. With a minimum frequency of 40Hz, the UFR52 can go slightly deeper then the UBR62's min frequency of 41Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
UBR62 and UFR52 have the same Impedance of 6 ohms but where they differ is the sensitivity levels. UBR62 sensitivity is rated at 85 dB and the UFR52's is at 86 dB. This 1 dB difference makes the ELAC Uni-Fi Ref UFR52 a more sensitive speaker compared to ELAC Uni-Fi Ref UBR62, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using
an amplifier within this range ensures the nominal performance , inputting a power that is higher than the
max wattage can result in a damaged speaker.
UBR62 and UFR52 has the same power range of up to 140 watts.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Both UBR62 and UFR52 features dual binding post speaker terminals for bi-amping or bi-wiring.
ELAC Uni-Fi Ref UBR62's Binding post terminals allows Bi-amping or bi-wiring
ELAC Uni-Fi Ref UFR52's Binding post terminals allows Bi-amping or bi-wiring
ELAC Uni-Fi Ref UFR52 Port
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare ELAC Uni-Fi Ref UBR62's and ELAC Uni-Fi Ref UFR52's external dimensions. ELAC Uni-Fi Ref UBR62 has external dimensions of 359.0 x 210.0 x 332.0mm ( 14-1/8 x 8-1/4 x 13-1/16inch) whereas ELAC Uni-Fi Ref UFR52 has external dimensions of 1005.0 x 235.0 x 339.0mm ( 39-9/16 x 9-1/4 x 13-5/16inch) .
ELAC Uni-Fi Ref UFR52 is clearly the larger of the two speakers. Its body is 25mm wider, 646mm taller and 7mm deeper than ELAC Uni-Fi Ref UBR62.
Below you can see the front view size comparison of ELAC Uni-Fi Ref UBR62 and ELAC Uni-Fi Ref UFR52 in scale.
Comparison image of ELAC Uni-Fi Ref UBR62 and ELAC Uni-Fi Ref UFR52 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the ELAC Uni-Fi Ref UBR62 is approximately 697.2cm2 / 108.1inch2 and base area of the ELAC Uni-Fi Ref UFR52 is approximately 796.7cm2 / 123.5inch2. The UBR62 requires 12% less surface area than the UFR52 which gives it a small advantage on placement in tight spaces.
What's in the Box of ELAC Uni-Fi Ref UBR62?
Here are the items that are included inside the box of UBR62:
2 Bookshelf loudspeakers2 Grilles4 Jumper-bars (pre-installed)Operating Instructions
What's in the Box of ELAC Uni-Fi Ref UFR52?
Here are the items that come with the UFR52:
Floorstanding loudspeakerGrille2 Jumper-bars (pre-installed)2 Stabilizer-bars4 Spike feet4 Protective discs4 Knobs6 Machine screwsHex-keyOperating Instructions