Dynaudio Heritage Special is a 2-way Passive Bass Reflex Bookshelf speaker by Dynaudio. It was released in November 2020. It features a 1.1" Soft-Dome Tweeter and 1 x 7" MSP Woofer.
A 2-way standmount with a 7 inch MSP mid/bass driver and the 28 mm Esotar 3 tweeter. 85 dB sensitive, 4 ohms, 200 W IEC long-term, 42 Hz to 23 kHz. A limited Heritage Collection build, using the Esotar 3 tweeter.
The speaker has a frequency range of 42-23k Hz and a sensitivity of 85 dB.
Room Size Suitability
The size of the room where you plan to use the Dynaudio Heritage Special is a crucial factor in your decision. We have assessed its suitability for various room sizes based on its dimensions and maximum power output:
| Listening Environment* |
Suitability |
| Near-field | Good |
| Small Room | Good |
| Mid-size Room | Average |
| Large Room | Poor |
| Very Large Room | No way |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2, Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: > 400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual listening experience changes depending on floor height, room shape, surface materials, listening position, speaker locations, etc.)
Dynaudio's Heritage Collection Series of Loudspeakers
Heritage Special is a member of Dynaudio's Heritage Collection series of Passive speakers. Below you can see the main specs of these speakers.
Dynaudio Heritage Collection Series Speakers
**This post contains affiliate links, and we will be compensated if you make a purchase after clicking through our links. As an Amazon Associate I earn from qualifying purchases.
Frequency Response of the Dynaudio Heritage Special Speaker
Dynaudio Heritage Special has a Frequency response range of 42-23k Hz at ±3dB. With a minimum frequency of 42 Hz, Heritage Special delivers deep bass that will likely satisfy most listeners, especially those who enjoy music. However, movie enthusiasts and music fans who prefer a full range of sound may still benefit from adding a subwoofer.
Here we have a comparison of how Heritage Special's Low frequency value compares with the average, max and min Low frequency values in its class.
Low Frequency
Bookshelf Speakers
Dynaudio Heritage Special
Thinking about a subwoofer for the Dynaudio Heritage Special?
Crossover frequency of the Dynaudio Heritage Special?
The Crossover frequency of the Heritage Special is set to 2200 Hz. This is the threshold frequency where the higher frequency signals over this level are sent to the tweeter and the lower-frequency signals are sent to the woofer by the crossover component.
Impedance and Sensitivity
Dynaudio Heritage Special's nominal impedance level is
4 ohms and has a sensitivity of
85 dB.
Sensitivity
Bookshelf Speakers
Dynaudio Heritage Special
Nominal Impedance of the 4 Ohms means that the Dynaudio Heritage Special is a difficult to drive speaker from nominal Impedance perspective, make sure that you choose an amplifier than can provide 4 Ohms for this speaker.
Many AVRs (audio/video receiver) in the market may have difficulty when the speakers dip below the 4 Ohms levels (this may cause clipping or even physical damage), so we recommend to not pair the Dynaudio Heritage Special with an AVR but use an Integrated Amplifier instead.
Sensitivity
With a sensitivity level of only 85 dB, Dynaudio Heritage Special is a difficult to drive speaker from Sensitivity perspective, make sure to choose an amplifier with a high output if you like listening to your music at high volume levels. You may especially have a hard time using Tube amplifiers which are traditionally very low power compared to Class A/B or Class D amps. Work out how loud the Dynaudio Heritage Special plays in your room →
Running more than one pair from a single amplifier? Check the load it would present →
What amplifier does the Dynaudio Heritage Special need?
At normal listening levels in a medium room, about
47–200 W
per channel into 4 ohms.
Set your own conditions and we will rank every amplifier we cover.
Prefer to browse? See every integrated amplifier we cover.
Input Type
Heritage Special features Binding post type connectors. Bi-amping and Bi-wiring are not possible.
Work out what gauge speaker cable this run needs →
Dynaudio Heritage Special External Dimensions and Weight
Dynaudio Heritage Special has external dimensions of (Height x Width x Depth) 15-3/16 x 8-3/16 x 12-5/8inch (385.0 x 208.0 x 320.0mm ).
Base Surface Area
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base area of Dynaudio Heritage Special is approximately 665.6cm2 / 103.2inch2.
Find speakers that fit your shelf or alcove → · Work out where they should sit in the room →
WeightThe Dynaudio Heritage Special weighs 11.00kg / 24.2lbs per piece. Here is a comparison of how Heritage Special's weight compares with the average, max and min weights in its class.
Weight
All Bookshelf Speakers
Dynaudio Heritage Special
Cabinet type and Materials
Dynaudio Heritage Special has a
Bass Reflex type cabinet. Bass Reflex type loudspeakers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs.
Port Position
Dynaudio Heritage Special is a rear-firing port speaker so you have to make sure you leave enough space between the back of the speaker and wall or bookshelf so that it has room to breathe.
Wall Mounting
Heritage Special doesn't sport any built-in mounting bracket, so you need an external structure to mount it on walls.
Does the Dynaudio Heritage Special come with a Grille?
Heritage Special comes with grilles. The purpose of the grille is to protect the delicate driver elements from external impacts while still allowing the sound to pass as clearly as possible.
Recommended Accessories
Here is a list of accessories that we think you may need for the Dynaudio Heritage Special.
- Speaker Cable and Connectors
- Vibration Isolators: IsoAcoustics isolators are our favorite isolators but you may find more affordable options too.
- Acoustic Panels and Treatments: Your room is as important as your stereo equipment so acoustic treatments goes a long way in improving the overall performance.
- Speaker Stands: Stands bring your bookshelf speakers to ideal height (rule of thumb is to have the tweeter level with your ear in your listening position), helps stability and acoustical isolation.
Official Product Page
Official manufacturer's product page for the Dynaudio Heritage Special speaker can be found below:
Official Product Page for Dynaudio Heritage Special