The Sprout100 is an Integrated Amplifier with built-in DAC by PS Audio that delivers 50 watts x 2 channels into 8 ohms and 100 watts x 2 channels into 4 ohms. Minimum impedance of 4 ohms makes the Sprout100 compatible with a wide range of loudspeakers. Thanks to its built-in ESS Sabre 9016 DAC, you can play digital sources directly without the need for an external DAC unit. PS Audio Sprout100 lets you connect your turntable via its Phono input and start listening to your vinyl collection without a hassle. PS Audio Sprout100 has an MSRP of 799$.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases.
Performance Specs
One of the most important factors when deciding on an integrated amplifier is its power ratings and compatibility with your speaker's impedance requirements.The PS Audio Sprout100 is rated at 50 watts RMS into 8-ohms. PS Audio provides this wattage at a THD (Total Harmonic Distortion) of 0.01 which is an important indicator of distortion at the given values (lower THD is better).
Here are the main highlights of its performance specs:
- 50 watts into 8-ohms (20-20k) at 0.01
- 100 watts into 4-ohms
- 4-ohms Min Impedance (allows compatibility with a wide range of loudspeakers)
- 100dB Signal to Noise Ratio
When pairing the PS Audio Sprout100 with a passive Bookshelf (Stand mount) or Passive Floor Standing (Tower) speaker, you have to check if their Max Power Range is below the max wattage of the amp for the given impedance levels.
Operating your amp outside of this max range may damage the speakers.
What size of room is the PS Audio Sprout100 Amplifier good for?
An essential deciding factor is the size of the room in which you intend to employ the PS Audio Sprout100 amplifier. Here, taking into account its maximum power parameters, we analyzed its applicability to various size environments:
Listening Environment |
Suitability |
Near-field | Average |
Small Room | Good |
Mid-size Room | Average |
Large Room | Poor |
Very Large Room | Bad |
Inputs and Outputs
Besides the performance specs of the PS Audio Sprout100, the next important feature set that you have to evaluate is the input and output selections that it offers.
PS Audio Sprout100 has total of 2 Analog inputs including 1 Phono Input (MM).
Inputs
- Total Number of Analog Inputs: 2
- Phono Input
- 1 Optical Digital Input
- USB Input:
Outputs
- Stereo RCA,Sub Preamp Outputs
- 1/4-inch Headphone Output
- Subwoofer Output
Bluetooth Connectivity
PS Audio Sprout100 features built-in Bluetooth for wireless music streaming from your Bluetooth-enabled devices such as Apple iPod/iPhone/iPad, Android smartphone/tablet, Windows PC, Mac computers/laptops.
Among the amps in the same price range, these are the 5 amps that have Bluetooth Connectivity:
Phono Input
PS Audio Sprout100 features one Phono Input which is compatible with
MM (Moving Magnet) type of phono cartridges, you can connect your turntable with MM cartridges directly to this amp without the need for a phono preamp. If you are using an MC cartridge on your turntable, you need to use a phono preamp that has MC phono stage such as the
Cambridge Duo or the
iFi ZEN Phono.
Subwoofer Output
PS Audio Sprout100 has a dedicated subwoofer output which can be used to connect it directly to a powered subwoofer via an LFE(Low Frequency Effects) cable.
Check our
Powered Subwoofers page to find a subwoofer that will work with PS Audio Sprout100 amp and your speakers.
DAC and Digital Music
The PS Audio Sprout100's built-in DAC allows the connection of digital sources directly, eliminating the need for an external DAC. The DAC chip that is used in the Sprout100 is the
ESS Sabre 9016, and supports resolutions up to
24-bit, 384KHZ.
PS Audio Sprout100 External Dimensions and Weight
PS Audio Sprout100 has external dimensions of (H x W x D) 1.9inch x 6.2inch x 8.2inch (48.3mm x 158.0mm x 208.0mm ). The unit weighs
1.30kg / 2.9lbs.
Base Surface Area
Base surface area of an integrated amplifier may become an important decision factor when the space in your room or desk is limited.
The base area of the PS Audio Sprout100 is approximately 328.6cm2 / 50.9inch2.
- Width: 158.0mm (6.2")
- Height: 48.3mm (1.9")
- Depth: 208.0mm (8.2")
- Weight: 1.30 kg (2.90lbs)
- Base Surface Area: ~328.6cm2 / 50.9inch2
- Volume: ~1.6 liter / 0.4 gallon
Available colors
PS Audio Sprout100 is available in Silver color options.
User's Manual
For more information about how to setup, use and maintain the PS Audio Sprout100, use the direct link below to download the official manual document:
Download User Manual for PS Audio Sprout100
Official Product Page
Official manufacturer's product page for the PS Audio Sprout100 Integrated Amplifier can be found below:
Official Product Page for PS Audio Sprout100
General |
Brand |
PS Audio |
Full Model Name |
PS Audio Sprout100 |
Amplifier Type |
Integrated Amplifier |
Amp Class |
Class D |
Performance |
Watts RMS per Channel into 8-ohms |
50 watts |
Watts RMS per Channel into 6-ohms |
N/A |
Watts RMS per Channel into 4-ohms |
100 watts |
Frequency Bandwidth |
20-20k |
THD |
0.01 |
Minimum Impedance |
4 |
Signal to Noise Ratio |
100 dB |
Digital Music |
Built-in DAC |
Yes |
DAC Specs |
ESS Sabre 9016 |
Bluetooth |
Yes |
WiFi |
N/A |
Ecosystem |
Apple AirPlay |
No |
Apple AirPlay2 |
No |
DTS Play-Fi |
No |
Chromecast built-in |
No |
Roon |
No |
HEOS |
No |
BluOS |
No |
CONNECTIONS |
Total Analog Inputs |
2 |
Phono Input |
Yes |
Optical Digital Inputs |
1 |
Coaxial Digital Inputs |
No |
USB Input |
Yes |
USB Type |
USB-B |
Preamp Outputs |
Stereo RCA,Sub |
Pre-out / Main-in Loop |
No |
Headphone Output |
1/4-inch |
Subwoofer Output |
Yes |
Removable Power Cord |
Yes |
PHYSICAL SPECS |
Height |
48.3mm (1.9") |
Width |
158.0mm (6.2") |
Depth |
208.0mm (8.2") |
Weight |
1.30 kg (2.90lbs) |
Available Colors |
Silver |
OTHER |
Parts Warranty |
|
Labor Warranty |
|