Power needed
4.7–75 W
per channel, into 8 ohms
To hit 95 dB peaks at 3 m from a pair of Triangle Borea BR10, you need at least 4.7 W a channel. Anything from about 9.5 W to 75 W a channel is comfortable; past that, more watts stop buying you anything.
Power is not your constraint. The
Triangle Borea BR10 is efficient enough that essentially any
amplifier we list will drive it at this level. Choose on inputs, streaming, phono
stage and price instead - and if you like valve amplifiers, this is a speaker
that suits them.
Show the working
- 95 dB target at the seat
- +4.8 dB for 3.0 m of distance
- -3 dB for a stereo pair
- -90.0 dB effective sensitivity
- 2 dB allowed for optimistic published sensitivity
- Published sensitivity 92 dB, used as 90.0 dB per watt.
LEAK Stereo 230 with the Triangle Borea BR10
Workable with care
12 dB of headroom over what this speaker needs - peaks stay clean.
Rated to 4 ohms, but this speaker dips to 3. Fine at sane volume, tight if you push it hard.
Power rises usefully into 4 ohms (75 W to 115 W).
Full LEAK Stereo 230 specs
·
Clear this amp
224 integrated amplifiers suit the Triangle Borea BR10
Also show the 1 we do not recommend
1
Good match
11 dB of headroom over what this speaker needs - peaks stay clean.
Rated down to 2 ohms - stable into anything this speaker will throw at it.
No 4 ohm power rating on file. On a 8 ohm speaker dipping to 3 that is the figure that matters, so this one is unproven on the load.
Balanced against the price of the speakers.
2
Excellent match
9 dB of headroom over what this speaker needs - peaks stay clean.
Rated down to 2 ohms - stable into anything this speaker will throw at it.
Power nearly doubles into 4 ohms (40 W to 80 W) - a stiff supply that copes with hard loads.
Sensible value pick against these speakers.
3
Workable with care
12 dB of headroom over what this speaker needs - peaks stay clean.
Rated to 4 ohms, but this speaker dips to 3. Fine at sane volume, tight if you push it hard.
Power nearly doubles into 4 ohms (70 W to 140 W) - a stiff supply that copes with hard loads.
Balanced against the price of the speakers.
4
Workable with care
12 dB of headroom over what this speaker needs - peaks stay clean.
Rated to 4 ohms, but this speaker dips to 3. Fine at sane volume, tight if you push it hard.
Power nearly doubles into 4 ohms (70 W to 140 W) - a stiff supply that copes with hard loads.
Balanced against the price of the speakers.
5
Workable with care
12 dB of headroom, far more than needed. No harm in it.
Rated to 4 ohms, but this speaker dips to 3. Fine at sane volume, tight if you push it hard.
Power nearly doubles into 4 ohms (80 W to 150 W) - a stiff supply that copes with hard loads.
Balanced against the price of the speakers.
6
Workable with care
12 dB of headroom over what this speaker needs - peaks stay clean.
Rated to 4 ohms, but this speaker dips to 3. Fine at sane volume, tight if you push it hard.
Power nearly doubles into 4 ohms (75 W to 150 W) - a stiff supply that copes with hard loads.
Balanced against the price of the speakers.
7
Workable with care
10 dB of headroom over what this speaker needs - peaks stay clean.
Rated to 4 ohms, but this speaker dips to 3. Fine at sane volume, tight if you push it hard.
Power nearly doubles into 4 ohms (50 W to 100 W) - a stiff supply that copes with hard loads.
Balanced against the price of the speakers.
8
Workable with care
13 dB of headroom, far more than needed. No harm in it.
Rated to 4 ohms, but this speaker dips to 3. Fine at sane volume, tight if you push it hard.
Power nearly doubles into 4 ohms (100 W to 200 W) - a stiff supply that copes with hard loads.
Balanced against the price of the speakers.
9
Workable with care
11 dB of headroom over what this speaker needs - peaks stay clean.
Rated to 4 ohms, but this speaker dips to 3. Fine at sane volume, tight if you push it hard.
Power nearly doubles into 4 ohms (55 W to 105 W) - a stiff supply that copes with hard loads.
Sensible value pick against these speakers.
10
Workable with care
12 dB of headroom, far more than needed. No harm in it.
Rated to 4 ohms, but this speaker dips to 3. Fine at sane volume, tight if you push it hard.
Power nearly doubles into 4 ohms (80 W to 150 W) - a stiff supply that copes with hard loads.
Balanced against the price of the speakers.
11
Workable with care
12 dB of headroom, far more than needed. No harm in it.
Rated to 4 ohms, but this speaker dips to 3. Fine at sane volume, tight if you push it hard.
Power nearly doubles into 4 ohms (76 W to 135 W) - a stiff supply that copes with hard loads.
Sensible value pick against these speakers.
12
Workable with care
12 dB of headroom over what this speaker needs - peaks stay clean.
Rated to 4 ohms, but this speaker dips to 3. Fine at sane volume, tight if you push it hard.
Power nearly doubles into 4 ohms (70 W to 140 W) - a stiff supply that copes with hard loads.
Balanced against the price of the speakers.
13
Workable with care
11 dB of headroom over what this speaker needs - peaks stay clean.
This amplifier does not publish a minimum impedance. An 8 ohm speaker is a safe bet even so.
Power rises usefully into 4 ohms (60 W to 100 W).
Balanced against the price of the speakers.
14
Workable with care
11 dB of headroom over what this speaker needs - peaks stay clean.
This amplifier does not publish a minimum impedance. An 8 ohm speaker is a safe bet even so.
Power rises usefully into 4 ohms (60 W to 100 W).
Balanced against the price of the speakers.
15
Good match
12 dB of headroom over what this speaker needs - peaks stay clean.
Rated down to 2 ohms - stable into anything this speaker will throw at it.
No 4 ohm power rating on file. On a 8 ohm speaker dipping to 3 that is the figure that matters, so this one is unproven on the load.
Costs more than the speakers - worth it only if you plan to upgrade them later.
16
Workable with care
12 dB of headroom over what this speaker needs - peaks stay clean.
Rated to 4 ohms, but this speaker dips to 3. Fine at sane volume, tight if you push it hard.
Power rises usefully into 4 ohms (70 W to 100 W).
Balanced against the price of the speakers.
17
Workable with care
12 dB of headroom over what this speaker needs - peaks stay clean.
Rated to 4 ohms, but this speaker dips to 3. Fine at sane volume, tight if you push it hard.
Power rises usefully into 4 ohms (75 W to 115 W).
Balanced against the price of the speakers.
18
Workable with care
12 dB of headroom over what this speaker needs - peaks stay clean.
Rated to 4 ohms, but this speaker dips to 3. Fine at sane volume, tight if you push it hard.
Power rises usefully into 4 ohms (75 W to 115 W).
Balanced against the price of the speakers.
19
Workable with care
11 dB of headroom over what this speaker needs - peaks stay clean.
Rated to 4 ohms, but this speaker dips to 3. Fine at sane volume, tight if you push it hard.
Power rises usefully into 4 ohms (60 W to 100 W).
Balanced against the price of the speakers.
20
Workable with care
12 dB of headroom over what this speaker needs - peaks stay clean.
Rated to 4 ohms, but this speaker dips to 3. Fine at sane volume, tight if you push it hard.
Power rises usefully into 4 ohms (70 W to 100 W).
Balanced against the price of the speakers.
Showing the best 20 of 224. Narrow it with the price range below, or a different budget split.
68 power amplifiers that would also drive them
Listed separately because they are not a complete system: a power amplifier has no volume control and no inputs to speak of, so you need a preamplifier or a streaming preamp as well. Worth it if you already own one, or if you want to buy the two halves separately.
1
Good match
15 dB of headroom, far more than needed. No harm in it.
Rated down to 2 ohms - stable into anything this speaker will throw at it.
Power rises usefully into 4 ohms (160 W to 240 W).
Balanced against the price of the speakers.
2
Good match
16 dB of headroom, far more than needed. No harm in it.
Rated down to 2 ohms - stable into anything this speaker will throw at it.
Power rises usefully into 4 ohms (200 W to 320 W).
Balanced against the price of the speakers.
3
Workable with care
15 dB of headroom, far more than needed. No harm in it.
This amplifier does not publish a minimum impedance. An 8 ohm speaker is a safe bet even so.
Power nearly doubles into 4 ohms (140 W to 300 W) - a stiff supply that copes with hard loads.
Balanced against the price of the speakers.
4
Good match
13 dB of headroom, far more than needed. No harm in it.
Rated down to 2 ohms - stable into anything this speaker will throw at it.
Power nearly doubles into 4 ohms (100 W to 190 W) - a stiff supply that copes with hard loads.
Far more expensive than the speakers. Spend it on speakers first.
5
Workable with care
9 dB of headroom over what this speaker needs - peaks stay clean.
Has a 8 ohm tap, which is exactly what this 8 ohm speaker wants. Taps: 4 / 8 / 16 ohm. This speaker swings from 8 ohms nominal down to 3, and a valve amplifier follows that curve - expect an audible tonal shift, not damage.
A valve amplifier makes the same power on each tap, so what matters is sensitivity - and at 90.0 dB this speaker is efficient enough that 40 W is comfortable.
Balanced against the price of the speakers.
6
Good match
17 dB of headroom, far more than needed. No harm in it.
Rated down to 2 ohms - stable into anything this speaker will throw at it.
No 4 ohm power rating on file. On a 8 ohm speaker dipping to 3 that is the figure that matters, so this one is unproven on the load.
Balanced against the price of the speakers.
7
Workable with care
10 dB of headroom over what this speaker needs - peaks stay clean.
Has a 8 ohm tap, which is exactly what this 8 ohm speaker wants. Taps: 4 / 8 / 16 ohm. This speaker swings from 8 ohms nominal down to 3, and a valve amplifier follows that curve - expect an audible tonal shift, not damage.
A valve amplifier makes the same power on each tap, so what matters is sensitivity - and at 90.0 dB this speaker is efficient enough that 44 W is comfortable.
Costs more than the speakers - worth it only if you plan to upgrade them later.
8
Good match
17 dB of headroom, far more than needed. No harm in it.
Rated down to 1 ohms - stable into anything this speaker will throw at it.
Power nearly doubles into 4 ohms (250 W to 450 W) - a stiff supply that copes with hard loads.
Costs more than the speakers - worth it only if you plan to upgrade them later.
Were these amplifier recommendations useful?
It helps us tune the matching, and we read every comment.
Thanks. Anything you would add?
Optional, and it goes straight to the person who maintains this page.
Thanks - noted.
Sensitivity and impedance figures are the manufacturer's own. We read sensitivity as dB at 2.83 V/1 m and take 2 dB off it, because published figures run high. Treat the result as a well-founded starting point, not a measurement. Full Triangle Borea BR10 specs.
More tools
💰
System Budget Planner
Split a total across speakers, amplifier and subwoofer, then fill every slot with real models that work together.
📏️Will It Fit? Speaker Size Finder
Measure your shelf or alcove and see every speaker that goes in it, with a warning where a rear port needs more room than the box does.
🔌Speaker Wire Gauge Calculator
How thick your speaker cable needs to be for the run length and impedance, and what you lose if it is too thin.
⚡Speaker Impedance Calculator
Wire two or more speakers in series or parallel and see the load your amplifier actually sees.
📏Speaker Placement Calculator
A plan view of your room: speaker spacing, wall distances, where the bass cancels and where the first reflection lands.
🎸Subwoofer Crossover Calculator
Where to set the crossover between your speakers and a subwoofer, and which reason is driving the answer.
🎧Speaker Test Tones
Channel check, polarity, bass extension and frequency sweeps, generated in your browser. Nothing to download.
🏠Room Mode Calculator
The frequencies your room reinforces and cancels, where they pile up, and what to move first.
📣SPL & Amplifier Power Calculator
How loud a speaker plays for a given power at a given distance - or how many watts you need for a target level.