Spendor Classic 1/2 is a 3-way Passive Bass Reflex Bookshelf speaker by Spendor. It was released in 2022. It features a 0.87" Tweeter, 1 x 5.91" Midrange and 1 x 8.27" Woofer.
3-way reflex. LF 8.27" (210 mm). MF 5.9" (150 mm). HF 0.866" (22 mm).
The speaker has a frequency range of 30-25k Hz and a sensitivity of 87 dB. Spendor Classic 1/2 has an MSRP of 9998$ per pair.
Room Size Suitability
The size of the room where you plan to use the Spendor Classic 1/2 is a crucial factor in your decision. We have assessed its suitability for various room sizes based on its dimensions and maximum power output:
| Listening Environment* |
Suitability |
| Near-field | Good |
| Small Room | Good |
| Mid-size Room | Average |
| Large Room | Poor |
| Very Large Room | No way |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2, Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: > 400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual listening experience changes depending on floor height, room shape, surface materials, listening position, speaker locations, etc.)
**This post contains affiliate links, and we will be compensated if you make a purchase after clicking through our links. As an Amazon Associate I earn from qualifying purchases.
Frequency Response of the Spendor Classic 1/2 Speaker
Spendor Classic 1/2 has a Frequency response range of 30-25k Hz at ±3dB. With a minimum frequency of 30 Hz, Classic 1/2 delivers deep bass that will likely satisfy most listeners, especially those who enjoy music. However, movie enthusiasts and music fans who prefer a full range of sound may still benefit from adding a subwoofer.
Here we have a comparison of how Classic 1/2's Low frequency value compares with the average, max and min Low frequency values in its class.
Low Frequency
Bookshelf Speakers
Thinking about a subwoofer for the Spendor Classic 1/2?
Crossover frequency of the Spendor Classic 1/2?
The crossover points of the Classic 1/2 are set at 415 Hz, 2.7 kHz.
Impedance and Sensitivity
Spendor Classic 1/2's nominal impedance level is
8 ohms and has a sensitivity of
87 dB.
Sensitivity
Bookshelf Speakers
8 Ohms is pretty much the standard nominal impedance amongst stereo speakers and amplifiers so Spendor Classic 1/2 is not considered a difficult to drive speaker from nominal Impedance perspective.
Sensitivity
With a sensitivity level of only 87 dB, Spendor Classic 1/2 is a difficult to drive speaker from Sensitivity perspective, make sure to choose an amplifier with a high output if you like listening to your music at high volume levels. You may especially have a hard time using Tube amplifiers which are traditionally very low power compared to Class A/B or Class D amps. Work out how loud the Spendor Classic 1/2 plays in your room →
What amplifier does the Spendor Classic 1/2 need?
At normal listening levels in a medium room, about
15–235 W
per channel into 8 ohms.
Set your own conditions and we will rank every amplifier we cover.
Prefer to browse? See every integrated amplifier we cover.
Input Type
Classic 1/2 features Binding post type connectors. Bi-amping and Bi-wiring are not possible.
Work out what gauge speaker cable this run needs →
Spendor Classic 1/2 External Dimensions and Weight
Spendor Classic 1/2 has external dimensions of (Height x Width x Depth) 24.4 x 12 x 14.7inch (619.8 x 304.8 x 373.4mm ).
Base Surface Area
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base area of Spendor Classic 1/2 is approximately 1138.1cm2 / 176.4inch2.
Find speakers that fit your shelf or alcove → · Work out where they should sit in the room →
WeightThe Spendor Classic 1/2 weighs 22.00kg / 48.4lbs per piece. Here is a comparison of how Classic 1/2's weight compares with the average, max and min weights in its class.
Weight
All Bookshelf Speakers
Weight
Bookshelf Speakers under $10000
Cabinet type and Materials
Spendor Classic 1/2 has a
Bass Reflex type cabinet. Bass Reflex type loudspeakers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs.
Wall Mounting
Classic 1/2 doesn't sport any built-in mounting bracket, so you need an external structure to mount it on walls.
Does the Spendor Classic 1/2 come with a Grille?
Classic 1/2 comes with grilles. The purpose of the grille is to protect the delicate driver elements from external impacts while still allowing the sound to pass as clearly as possible.
Recommended Accessories
Here is a list of accessories that we think you may need for the Spendor Classic 1/2.
- Speaker Cable and Connectors
- Vibration Isolators: IsoAcoustics isolators are our favorite isolators but you may find more affordable options too.
- Acoustic Panels and Treatments: Your room is as important as your stereo equipment so acoustic treatments goes a long way in improving the overall performance.
- Speaker Stands: Stands bring your bookshelf speakers to ideal height (rule of thumb is to have the tweeter level with your ear in your listening position), helps stability and acoustical isolation.
Official Product Page
Official manufacturer's product page for the Spendor Classic 1/2 speaker can be found below:
Official Product Page for Spendor Classic 1/2