In this review, we will be comparing Classic 100 and Classic 1/2, two Passive Bookshelf speakers by Spendor.
Let's have a brief look at the main features
of Spendor Classic 100 and Spendor Classic 1/2 first before getting into our more
detailed comparison.
| Key Specs | Spendor Classic 100 | Spendor Classic 1/2 |
|---|
| Brand | Spendor United Kingdom · founded 1969 | Spendor United Kingdom · founded 1969 |
|---|
| Design | 3-way | 3-way |
|---|
| Tweeter | 0.87" | 0.87" |
|---|
| Midrange | 7.09" | 5.91" |
|---|
| Woofer | 12.2" | 8.27" |
|---|
| Frequency response | 25-25k Hz | 30-25k Hz |
|---|
| Sensitivity | 89 dB | 87 dB |
|---|
| Impedance | 8 ohms | 8 ohms |
|---|
| Weight | 36.02kg / 79.2lbs | 22.00kg / 48.4lbs |
|---|
| Dimensions (H x W x D) | 27.5" x 14.5" x 17" 698.5 x 368.3 x 431.8mm | 24.4" x 12" x 14.7" 619.8 x 304.8 x 373.4mm |
|---|
What size room are the Spendor Classic 100 and Spendor Classic 1/2 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
Spendor Classic 100 |
Spendor Classic 1/2 |
| Near-field |
Good |
Good |
| Small Room |
Good |
Good |
| Mid-size Room |
Average |
Average |
| Large Room |
Poor |
Poor |
| Very Large Room |
No way |
No way |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
The sections below take each area in turn: drivers, frequency response, physical size and what you get in the box.
Drivers
Both Classic 100 and Classic 1/2 are 3-way speakers.
Spendor Classic 100Spendor Classic 1/2
TweeterMidrangeWoofer
Front view, drawn to scale - cabinets and drivers share one scale, so sizes are directly comparable. Hover a driver for its size.
| Driver |
Spendor Classic 100 |
Spendor Classic 1/2 |
|
Driver Setup
|
3-way
|
3-way
|
|
Tweeter
|
0.87-inch
|
0.87-inch
|
|
Midrange
|
1 x 7.09-inch |
1 x 5.91-inch |
|
Woofer
|
1 x 12.2-inch
|
1 x 8.27-inch
|
Classic 100 features a 0.87" Tweeter, a 7.09" Midrange and 1 x 12.2" Woofer with a Crossover frequency at 490 Hz, 3.6 kHz. On the other hand, the Classic 1/2 features a 0.87" Tweeter, a 5.91" Midrange and 1 x 8.27" Woofer with a Crossover frequency at 415 Hz, 2.7 kHz.
Frequency Response
Classic 100 has a frequency range of 25-25k Hz whereas Classic 1/2 has a frequency range of 30-25k Hz. With a minimum frequency of 25Hz, the Classic 100 can go significantly deeper on the low side and provide stronger bass compared to the Classic 1/2's min frequency of 30Hz.
The graph below depicts how these two speakers compare with the max, min and average Low Frequency values of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
Neither pair reaches down to 20Hz, the usual definition of full-range, which is normal for speakers of this size. If you want the bottom octave for movies or bass-heavy music, add a subwoofer to whichever you choose. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Classic 100 and Classic 1/2 have the same Impedance of 8 ohms but where they differ is the sensitivity levels. Classic 100 sensitivity is rated at 89 dB and the Classic 1/2's is at 87 dB. This 2 dB difference makes the Spendor Classic 100 a more sensitive speaker compared to Spendor Classic 1/2, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Which plays louder on your amplifier?
Starting with a popular amplifier - change it to the one you own, or any you are
considering, and watch both numbers move.
Input Type and Bi-Amping / Bi-Wiring
Classic 100 features Binding post type posts and Classic 1/2 has a Binding post type posts. None of these speakers feature bi-amping/bi-wiring.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Spendor Classic 100's and Spendor Classic 1/2's external dimensions. Spendor Classic 100 has external dimensions of 698.5 x 368.3 x 431.8mm (27.5 x 14.5 x 17inch) whereas Spendor Classic 1/2 has external dimensions of 619.8 x 304.8 x 373.4mm (24.4 x 12 x 14.7inch).
Spendor Classic 100 is clearly the larger of the two speakers. Its body is 63.5mm wider, 78.7mm taller and 58.4mm deeper than Spendor Classic 1/2.
Size, drawn to scale
Both speakers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same surface and pushed back to the same wall, so the deeper one visibly sticks out further.
Spendor Classic 100 needs about 40% more floor or shelf area. Spendor Classic 100 is 58mm deeper, so it stands that much further out from the wall. Spendor Classic 100 is 79mm taller.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Spendor Classic 100 is approximately 1590.3cm2 / 246.5inch2 and base area of the Spendor Classic 1/2 is approximately 1138.1cm2 / 176.4inch2. The Classic 100 requires 40% more surface area than the Classic 1/2 which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Spendor Classic 100 weighs 36.02kg / 79.2lbs and the Spendor Classic 1/2 weighs 22.00kg / 48.4lbs. This makes the Classic 100 64% heavier than the Classic 1/2.
Here is a comparison of how Classic 100 and Classic 1/2's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
Sensitivity |
89 dB
vs
87 dB
|
Play louder with same amount of amplification power |
Woofer Size |
12.2 inches
vs
8.27 inches
|
Larger woofer |
Low Frequency Response |
25 Hz
vs
30 Hz
|
Generates deeper bass |
Height |
619mm
vs
698mm
|
Easier to fit in smaller spaces |
Base Surface Area |
1138cm2
vs
1590cm2
|
Takes less floor space |
Price per pair* |
9998USD
vs
15998USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
Spendor Classic 100 |
Spendor Classic 1/2 |
| Brand |
Spendor |
Spendor |
| Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
| Sensitivity |
89 dB |
87 dB |
| Impedance |
8 ohms |
8 ohms |
| Frequency Response |
25-25k Hz |
30-25k Hz |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
12.2" |
8.27" |
| Woofer Composition |
|
|
| Tweeter Size |
0.87" |
0.87" |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
7.09" |
5.91" |
| Crossover Frequency |
490 Hz, 3.6 kHz |
415 Hz, 2.7 kHz |
Physical Specs |
|
|
| Height |
698.5mm (27.5") |
619.8mm (24.4") |
| Width |
368.3mm (14.5") |
304.8mm (12") |
| Depth |
431.8mm (17") |
373.4mm (14.7") |
| Weight |
36.02kg (79.2lbs) |
22.00kg (48.4lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Mounting Bracket |
|
|
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
|
|
| Labor Warranty |
|
|
These sit in different price classes - Spendor Classic 100 costs roughly 1.6x what Spendor Classic 1/2 does. Expect it to lead on paper; the question is whether the gap is audible enough in your room to be worth it.
| Area | Better | Why |
|---|
| Bass | A | Spendor Classic 100 digs deeper - 25Hz against 30Hz. A subwoofer would even that out. |
| Amplifier needs | A | Spendor Classic 100 is more sensitive (89dB vs 87dB), so it goes louder on the same amplifier. |
| Size | depends | Spendor Classic 1/2 is easier to place; Spendor Classic 100 is bigger, which usually goes with fuller bass. Your room decides. |
| Price | B | Spendor Classic 1/2 is cheaper - $9,998 against $15,998, about 38% less; arguably a different class. |
A Spendor Classic 100 B Spendor Classic 1/2
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both speakers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
The usual trade-off: Spendor Classic 100 measures better, Spendor Classic 1/2 costs about about 60% more% less. Whether that gap is worth the money is the call only you can make - and in a normal room it is often smaller than the numbers suggest. If a subwoofer is in your plans, the bass gap largely stops mattering - you would be crossing over above 30Hz anyway, which makes the cheaper Spendor Classic 1/2 much easier to justify. In a large or open-plan room, Spendor Classic 100 has the cabinet volume to fill it more easily; in a small room, near a wall or at desk distance, Spendor Classic 1/2 is the easier speaker to get right.
And remember what a spec sheet cannot show: how each looks in your room and whether the finish suits it, what dealer support and warranty are like where you live, and how they actually sound to you. If you can hear them first - ideally with your own music - that will tell you more than any number above.