Perlisten S7t Black Edition is a 3-way Passive Bass Reflex Bookshelf speaker by Perlisten. It was released in 2023. It features a Tweeter and x " Woofer.
DPC-Array with 28mm Beryllium and two 28mm Textreme TPCD domes
The speaker has a frequency range of 22-37k Hz and a sensitivity of 91.4 dB. Perlisten S7t Black Edition has an MSRP of 30000$ per pair.
Room Size Suitability
The size of the room where you plan to use the Perlisten S7t Black Edition is a crucial factor in your decision. We have assessed its suitability for various room sizes based on its dimensions and maximum power output:
| Listening Environment* |
Suitability |
| Near-field | Good |
| Small Room | Good |
| Mid-size Room | Average |
| Large Room | Poor |
| Very Large Room | No way |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2, Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: > 400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual listening experience changes depending on floor height, room shape, surface materials, listening position, speaker locations, etc.)
**This post contains affiliate links, and we will be compensated if you make a purchase after clicking through our links. As an Amazon Associate I earn from qualifying purchases.
Frequency Response of the Perlisten S7t Black Edition Speaker
Perlisten S7t Black Edition has a Frequency response range of 22-37k Hz at ±3dB and Power Range of 100 - 600W RMS watts. With a minimum frequency of 22 Hz, S7t Black Edition delivers deep bass that will likely satisfy most listeners, especially those who enjoy music. However, movie enthusiasts and music fans who prefer a full range of sound may still benefit from adding a subwoofer.
Here we have a comparison of how S7t Black Edition's Low frequency value compares with the average, max and min Low frequency values in its class.
Low Frequency
Bookshelf Speakers
Perlisten S7t Black Edition
Thinking about a subwoofer for the Perlisten S7t Black Edition?
As you can see from the chart, Perlisten S7t Black Edition with its 22 Hz features the lowest Low Frequency level among the Bookshelf speakers in our database, promising a very good bass range.
Impedance and Sensitivity
Perlisten S7t Black Edition's nominal impedance level is
4 ohms but can go down to as low as
3.2 ohms, and has a sensitivity of
91.4 dB.
Sensitivity
Bookshelf Speakers
Perlisten S7t Black Edition
Nominal Impedance of the 4 Ohms means that the Perlisten S7t Black Edition is a difficult to drive speaker from nominal Impedance perspective, make sure that you choose an amplifier than can provide 4 Ohms for this speaker.
Many AVRs (audio/video receiver) in the market may have difficulty when the speakers dip below the 4 Ohms levels (this may cause clipping or even physical damage), so we recommend to not pair the Perlisten S7t Black Edition with an AVR but use an Integrated Amplifier instead.
Sensitivity
91dB of the Perlisten S7t Black Edition is considered a high sensitivity compared to average stereo speaker which makes S7t Black Edition an easy to drive from Sensitivity perspective. If you are planning to power your speaker with a Tube amp which are generally very low power, the Perlisten S7t Black Edition will be a good choice. Work out how loud the Perlisten S7t Black Edition plays in your room →
Running more than one pair from a single amplifier? Check the load it would present →
Minimum Impedance of the Perlisten S7t Black Edition
Even though the nominal impedance of the S7t Black Edition is 4 ohms, the minimum impedance level of this speaker according to Perlisten is 3.2 ohms Perlisten S7t Black Edition so while choosing an amplifier, you should ideally check if the unit you are considering can provide this impedance level.
What amplifier does the Perlisten S7t Black Edition need?
At normal listening levels in a medium room, about
12–190 W
per channel into 4 ohms.
Set your own conditions and we will rank every amplifier we cover.
Prefer to browse? See every integrated amplifier we cover.
Input Type
S7t Black Edition features Binding post type connectors. Bi-amping and Bi-wiring are not possible.
Work out what gauge speaker cable this run needs →
Perlisten S7t Black Edition External Dimensions and Weight
Perlisten S7t Black Edition has external dimensions of (Height x Width x Depth) 52.46 x 14.37 x 18.73inch (1332.5 x 365.0 x 475.7mm ).
Base Surface Area
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base area of Perlisten S7t Black Edition is approximately 1736.3cm2 / 269.1inch2.
Find speakers that fit your shelf or alcove → · Work out where they should sit in the room →
WeightThe Perlisten S7t Black Edition weighs 112.30kg / 247.1lbs per piece. Here is a comparison of how S7t Black Edition's weight compares with the average, max and min weights in its class.
Weight
All Bookshelf Speakers
Perlisten S7t Black Edition
Weight
Bookshelf Speakers under $30000
Perlisten S7t Black Edition
Cabinet type and Materials
Perlisten S7t Black Edition has a
Bass Reflex type cabinet. Bass Reflex type loudspeakers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs.
Wall Mounting
S7t Black Edition doesn't sport any built-in mounting bracket, so you need an external structure to mount it on walls.
Does the Perlisten S7t Black Edition come with a Grille?
S7t Black Edition comes with grilles. The purpose of the grille is to protect the delicate driver elements from external impacts while still allowing the sound to pass as clearly as possible.
Recommended Accessories
Here is a list of accessories that we think you may need for the Perlisten S7t Black Edition.
- Speaker Cable and Connectors
- Vibration Isolators: IsoAcoustics isolators are our favorite isolators but you may find more affordable options too.
- Acoustic Panels and Treatments: Your room is as important as your stereo equipment so acoustic treatments goes a long way in improving the overall performance.
- Speaker Stands: Stands bring your bookshelf speakers to ideal height (rule of thumb is to have the tweeter level with your ear in your listening position), helps stability and acoustical isolation.
Official Product Page
Official manufacturer's product page for the Perlisten S7t Black Edition speaker can be found below:
Official Product Page for Perlisten S7t Black Edition