KEF Q7 Meta is a 3-way Passive Bass Reflex Floor-standing speaker by KEF. It features a 0.75" Hard dome Tweeter, 1 x 4" Midrange and 2 x 6.5" Aluminum Woofer. The speaker has a frequency range of 46-20k Hz and a sensitivity of 87 dB. KEF Q7 Meta has an MSRP of 1800$ per pair.
Room Size Suitability
The size of the room where you plan to use the KEF Q7 Meta is a crucial factor in your decision. We have assessed its suitability for various room sizes based on its dimensions and maximum power output:
| Listening Environment* |
Suitability |
| Near-field | Bad |
| Small Room | Poor |
| Mid-size Room | Average |
| Large Room | Good |
| Very Large Room | Average |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2, Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: > 400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual listening experience changes depending on floor height, room shape, surface materials, listening position, speaker locations, etc.)
KEF Q7 Meta Lifestyle
KEF's Q Meta Series of Loudspeakers
Q7 Meta is a member of KEF's Q Meta series of Passive speakers. Below you can see the main specs of these speakers.
KEF Q Meta Series Speakers
KEF Q Meta Series Speakers
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases.
Frequency Response of the KEF Q7 Meta Speaker
KEF Q7 Meta has a Frequency response range of 46-20k Hz at ±3dB and Power Range of Up to 200 watts. With a minimum frequency of 46 Hz, Q7 Meta delivers moderate bass depth so depending on your use case, you might want to consider adding a subwoofer to your system.
To focus on the subwoofers that are in a similar price range with KEF Q7 Meta, check out the Powered Subwoofers under $2000. Alternatively, find the Full list of Powered Subwoofers regardless of the price.
Here we have a comparison of how Q7 Meta's Low and High frequency values compare with the average, max and min Low and High frequency values in its class.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
Crossover frequency of the KEF Q7 Meta?
Q7 Meta is a 3-way speaker and its crossover frequency between the woofer and the midrange set to 440Hz and the Crossover frequency between the midrange and the tweeter is set to 2300Hz.
Impedance and Sensitivity
KEF Q7 Meta's nominal impedance level is
4 ohms but can go down to as low as
3.2 ohms, and has a sensitivity of
87 dB.
Sensitivity
Floor-standing Speakers
Nominal Impedance of the 4 Ohms means that the KEF Q7 Meta is a difficult to drive speaker from nominal Impedance perspective, make sure that you choose an amplifier than can provide 4 Ohms for this speaker.
Many AVRs (audio/video receiver) in the market may have difficulty when the speakers dip below the 4 Ohms levels (this may cause clipping or even physical damage), so we recommend to not pair the KEF Q7 Meta with an AVR but use an Integrated Amplifier instead.
Sensitivity
With a sensitivity level of only 87 dB, KEF Q7 Meta is a difficult to drive speaker from Sensitivity perspective, make sure to choose an amplifier with a high output if you like listening to your music at high volume levels. You may especially have a hard time using Tube amplifiers which are traditionally very low power compared to Class A/B or Class D amps.
Minimum Impedance of the KEF Q7 Meta
Even though the nominal impedance of the Q7 Meta is 4 ohms, the minimum impedance level of this speaker according to KEF is 3.2 ohms KEF Q7 Meta so while choosing an amplifier, you should ideally check if the unit you are considering can provide this impedance level.
Check the amplifiers that are in a similar price range to the KEF Q7 Meta:
Input Type
Q7 Meta features Binding Post type connectors. Bi-amping and Bi-wiring are not possible.
KEF Q7 Meta External Dimensions and Weight
KEF Q7 Meta has external dimensions of (Height x Width x Depth) 39.4 x 12.5 x 12.4 in. (1001 x 317 x 315 mm ).
Base Surface Area
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base area of KEF Q7 Meta is approximately 998.6cm2 / 154.8inch2.
WeightThe KEF Q7 Meta weighs 18.45kg / 40.6lbs per piece. Here is a comparison of how Q7 Meta's weight compares with the average, max and min weights in its class.
Weight
All Floor-standing Speakers
Weight
Floor-standing Speakers under $2000
How does the KEF Q7 Meta compare to the KEF Q11 Meta?
One of the natural alternative to the KEF Q7 Meta is the Q11 Meta which is located one step higher in KEF's Passive Floorstanding selection.
Check the Detailed Comparison of KEF Q7 Meta vs Q11 Meta for more details.
Cabinet type and Materials
KEF Q7 Meta has a
Bass Reflex type cabinet. Bass Reflex type loudspeakers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs.
KEF Q7 Meta Feet
Port Position
KEF Q7 Meta is a rear-firing port speaker so you have to make sure you leave enough space between the back of the speaker and wall or bookshelf so that it has room to breathe.
Available colors
KEF Q7 Meta is available in Satin Black, Satin White and Walnut.
Does the KEF Q7 Meta come with a Grille?
Q7 Meta comes with magnetic grilles. The purpose of the grille is to protect the delicate driver elements from external impacts while still allowing the sound to pass as clearly as possible. Since the included grille of the Q7 Meta is magnetic type, it is very easy to put it on and off.
KEF Q7 Meta with Grille
What's in the Box of KEF Q7 Meta?
Here are the items that are included inside the box of Q7 Meta:
Q7 Meta Magnetic grilles Plinth and rubber feet Port bungs User manual and warranty information
Recommended Accessories
Here is a list of accessories that we think you may need for the KEF Q7 Meta.
User's Manual
For more information about how to setup, use and maintain the KEF Q7 Meta, use the direct link below to download the official manual document:
Download User Manual for KEF Q7 Meta
Official Brochure
Here is a link to download the official brochure for the KEF Q7 Meta speaker:
Official Brochure for KEF Q7 Meta
Official Product Page
Official manufacturer's product page for the KEF Q7 Meta speaker can be found below:
Official Product Page for KEF Q7 Meta
Warranty
5 Years of parts warranty and 5 Years of labor warranty is generally provided by the manufacturer.
Related Videos