In this review, we will be comparing two different type of speakers by KEF. KEF Q7 Meta is a Floor-standing speaker whereas the Q1 Meta is a Bookshelf speaker.
Let's have a brief look at the main features
of KEF Q7 Meta and KEF Q1 Meta first before getting into our more
detailed comparison.
KEF Q7 Meta Key Specs
- 3-way Design
- 12th Generation Uni-Q Driver
- 0.75" Hard dome Tweeter
- 4" Midrange
- 2 x 6.5" Aluminum Woofer
- 46-20k Hz Frequency Response
- 87 dB Sensitivity
- Impedance: 4ohms
- Power Range:Up to 200watts
- Weight:18.45kg
- Dimensions (H x W x D): 1001.0" x 12.5" x 12.4"( 1001 x 317 x 315 mm )
KEF Q1 Meta Key Specs
- 2-way Design
- 12th Generation Uni-Q Driver
- 1" Hard dome Tweeter
- 5.25" Aluminum Woofer
- 51-20k Hz Frequency Response
- 86 dB Sensitivity
- Impedance: 4ohms
- Power Range:Up to 150watts
- Weight:6.09kg
- Dimensions (H x W x D): 302.0" x 7.1" x 10.9"( 302 x 180 x 277 mm )
Q7 Meta and Q1 Meta are members of KEF's Q Meta series of speakers. Below you can find the loudspeakers from this series.
KEF Q Meta Series History
What size room are the KEF Q7 Meta and KEF Q1 Meta speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
| Listening Environment* |
KEF Q7 Meta |
KEF Q1 Meta |
| Near-field |
Bad |
Poor |
| Small Room |
Poor |
Average |
| Mid-size Room |
Average |
Good |
| Large Room |
Good |
Average |
| Very Large Room |
Average |
Poor |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2, Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: > 400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual listening experience changes depending on floor height, room shape, surface materials, listening position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the KEF Q7 Meta and KEF Q1 Meta compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
One of the fundamental differences between these two speakers is that Q7 Meta is a 3-way design whereas the Q1 Meta is a 2-way speaker. 3-way designs utilize a midrange driver in addition to the tweeter and woofer on 2-way designs. Designing a crossover for a 3-way speaker is a complicated process and generally increases the overall cost of the speaker.
| Driver |
KEF Q7 Meta |
KEF Q1 Meta |
|
Driver Setup
|
3-way
|
2-way
|
|
Tweeter
|
0.75-inch
|
1-inch
|
|
Midrange
|
1 x 4-inch |
- |
|
Woofer
|
2 x 6.5-inch
|
1 x 5.25-inch
|
Q7 Meta features a 0.75" vented aluminum dome with MAT absorber Hard dome Tweeter , a 4" Midrange and 2 x 6.5" Aluminum Woofer with a Crossover frequency at 440 Hz, 2.3 kHz. On the other hand, the Q1 Meta features a 1" vented aluminum dome with MAT absorber Hard dome Tweeter and 1 x 5.25" Aluminum Woofer with a Crossover frequency at 2.1 kHz.
Frequency Response
Q7 Meta has a frequency range of 46-20k Hz whereas Q1 Meta has a frequency range of 51-20k Hz. With a minimum frequency of 46Hz, the Q7 Meta can go significantly deeper on the low side and provide stronger bass compared to the Q1 Meta's min frequency of 51Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Q7 Meta and Q1 Meta have the same Impedance of 4 ohms but where they differ is the sensitivity levels. Q7 Meta sensitivity is rated at 87 dB and the Q1 Meta's is at 86 dB. This 1 dB difference makes the KEF Q7 Meta a more sensitive speaker compared to KEF Q1 Meta, hence will play louder with the same amount of watts.
One thing to keep in mind that the lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit comared to higher impedance speakers especially at high volume levels, so make sure the amp you pair with the Q7 Meta and the Q7 Meta can provide this impedance level.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Q7 Meta can handle a max power of 200 watts RMS from the amp the whereas Q1 Meta has a max power handling value of 150 watts RMS, 50 watts less than the Q7 Meta.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Q7 Meta features Binding Post type posts and Q1 Meta has a Binding Post type posts. None of these speakers feature bi-amping/bi-wiring.
KEF Q1 Meta's Binding Post terminals
Cabinet Type and Port Position
Both Q7 Meta and Q1 Meta have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare KEF Q7 Meta's and KEF Q1 Meta's external dimensions. KEF Q7 Meta has external dimensions of 1001 x 317 x 315 mm ( 39.4 x 12.5 x 12.4 in.) whereas KEF Q1 Meta has external dimensions of 302 x 180 x 277 mm ( 11.9 x 7.1 x 10.9 in.) .
KEF Q7 Meta is clearly the larger of the two speakers. Its body is 137mm wider, 699mm taller and 38mm deeper than KEF Q1 Meta.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the KEF Q7 Meta is approximately 998.6cm2 / 154.8inch2 and base area of the KEF Q1 Meta is approximately 498.6cm2 / 77.3inch2. The Q7 Meta requires 100% more surface area than the Q1 Meta which gives it a small disadvantage on placement in tight spaces.
What's in the Box of KEF Q7 Meta?
Here are the items that are included inside the box of Q7 Meta:
Q7 Meta Magnetic grilles Plinth and rubber feet Port bungs User manual and warranty information
What's in the Box of KEF Q1 Meta?
Here are the items that come with the Q1 Meta:
Q1 Meta (pair) Magnetic grilles (pair) Rubber feet Port bungs User manual and warranty information
Max Input Power 
Driver Setup 
Sensitivity 
Woofer Size 
Height 
Base Surface Area 
Price per pair*