In this review, we will be comparing two different type of speakers by KEF. KEF Q1 Meta is a Bookshelf speaker whereas the Q4 Meta is a Surround speaker.
Let's have a brief look at the main features
of KEF Q1 Meta and KEF Q4 Meta first before getting into our more
detailed comparison.
KEF Q1 Meta Key Specs
- 2-way Design
- 12th Generation Uni-Q Driver
- 1" Hard dome Tweeter
- 5.25" Aluminum Woofer
- 51-20k Hz Frequency Response
- 86 dB Sensitivity
- Impedance: 4ohms
- Power Range:Up to 150watts
- Weight:6.09kg
- Dimensions (H x W x D): 302.0" x 7.1" x 10.9"( 302 x 180 x 277 mm )
KEF Q4 Meta Key Specs
- 2-way Design
- 12th Generation Uni-Q Driver
- 1" Hard-dome Tweeter
- 5.25" Aluminum Woofer
- 65-20k Hz Frequency Response
- 86 dB Sensitivity
- Impedance: 4ohms
- Power Range:Up to 150watts
- Weight:5.73kg
- Dimensions (H x W x D): 400.0" x 9.8" x 5.6"( 400 x 250 x 142 mm )
Q1 Meta and Q4 Meta are members of KEF's Q Meta series of speakers. Below you can find the loudspeakers from this series.
KEF Q Meta Series
History
What size room are the KEF Q1 Meta and KEF Q4 Meta speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
KEF Q1 Meta |
KEF Q4 Meta |
| Near-field |
Poor |
Poor |
| Small Room |
Average |
Average |
| Mid-size Room |
Good |
Good |
| Large Room |
Average |
Average |
| Very Large Room |
Poor |
Poor |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the KEF Q1 Meta and KEF Q4 Meta compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Q1 Meta and Q4 Meta are 2-way speakers.
| Driver |
KEF Q1 Meta |
KEF Q4 Meta |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 5.25-inch
|
1 x 5.25-inch
|
Q1 Meta features a 1" vented aluminum dome with MAT absorber Hard dome Tweeter and 1 x 5.25" Aluminum Woofer with a Crossover frequency at 2.1 kHz. On the other hand, the Q4 Meta features a 1" vented aluminum dome with MAT absorber Hard-dome Tweeter and 1 x 5.25" Aluminum Woofer with a Crossover frequency at 1.8 kHz.
Frequency Response
Q1 Meta has a frequency range of 51-20k Hz whereas Q4 Meta has a frequency range of 65-20k Hz. With a minimum frequency of 51Hz, the Q1 Meta can go significantly deeper on the low side and provide stronger bass compared to the Q4 Meta's min frequency of 65Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Q1 Meta and Q4 Meta have the same Impedance of 4 ohms and their sensitivity is also same at 86 dB.
One thing to keep in mind that the lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit comared to higher impedance speakers especially at high volume levels, so make sure the amp you pair with the Q1 Meta and the Q1 Meta can provide this impedance level.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using
an amplifier within this range ensures the nominal performance , inputting a power that is higher than the
max wattage can result in a damaged speaker.
Q1 Meta and Q4 Meta has the same power range of Up to 150 watts.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Q1 Meta features Binding Post type posts and Q4 Meta has a Binding Post type posts. None of these speakers feature bi-amping/bi-wiring.
KEF Q1 Meta's Binding Post terminals
KEF Q4 Meta's Binding Post terminals
Cabinet Type and Port Position
Q1 Meta has a rear firing port whereas Q4 Meta has a side firing ports.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare KEF Q1 Meta's and KEF Q4 Meta's external dimensions. KEF Q1 Meta has external dimensions of 302 x 180 x 277 mm ( 11.9 x 7.1 x 10.9 in.) whereas KEF Q4 Meta has external dimensions of 400 x 250 x 142 mm ( 15.7 x 9.8 x 5.6 in.) .
KEF Q1 Meta is 70mm narrower and 98mm shorter than KEF Q4 Meta but it is also 135mm deeper.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the KEF Q1 Meta is approximately 498.6cm2 / 77.3inch2 and base area of the KEF Q4 Meta is approximately 355.0cm2 / 55.0inch2. The Q1 Meta requires 40% more surface area than the Q4 Meta which gives it a small disadvantage on placement in tight spaces.
What's in the Box of KEF Q1 Meta?
Here are the items that are included inside the box of Q1 Meta:
Q1 Meta (pair) Magnetic grilles (pair) Rubber feet Port bungs User manual and warranty information
What's in the Box of KEF Q4 Meta?
Here are the items that come with the Q4 Meta:
Q4 Meta Magnetic grilles (pair) Rubber feet Port bungs User manual and warranty information