In this review, we will be comparing two different type of speakers by KEF. KEF Q4 Meta is a Surround speaker whereas the Q11 Meta is a Floor-standing speaker.
Let's have a brief look at the main features
of KEF Q4 Meta and KEF Q11 Meta first before getting into our more
detailed comparison.
KEF Q4 Meta Key Specs
- 2-way Design
- 12th Generation Uni-Q Driver
- 1" Hard-dome Tweeter
- 5.25" Aluminum Woofer
- 65-20k Hz Frequency Response
- 86 dB Sensitivity
- Impedance: 4ohms
- Power Range:Up to 150watts
- Weight:5.73kg
- Dimensions (H x W x D): 400.0" x 9.8" x 5.6"( 400 x 250 x 142 mm )
KEF Q11 Meta Key Specs
- 3-way Design
- 12th Generation Uni-Q Driver
- 0.75" Hard dome Tweeter
- 4" Midrange
- 3 x 6.5" Aluminum Woofer
- 4" Midrange
- 44-20k Hz Frequency Response
- 89 dB Sensitivity
- Impedance: 4ohms
- Power Range:Up to 225watts
- Weight:22.55kg
- Dimensions (H x W x D): 1112.0" x 12.5" x 15"( 1112 x 317 x 380 mm )
Q4 Meta and Q11 Meta are members of KEF's Q Meta series of speakers. Below you can find the loudspeakers from this series.
KEF Q Meta Series
History
What size room are the KEF Q4 Meta and KEF Q11 Meta speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
KEF Q4 Meta |
KEF Q11 Meta |
| Near-field |
Poor |
Are you nuts? |
| Small Room |
Average |
Poor |
| Mid-size Room |
Good |
Average |
| Large Room |
Average |
Good |
| Very Large Room |
Poor |
Good |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the KEF Q4 Meta and KEF Q11 Meta compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
One of the fundamental differences between these two speakers is that Q4 Meta is a 2-way design whereas the Q11 Meta is a 3-way speaker. 3-way designs utilize a midrange driver in addition to the tweeter and woofer on 2-way designs. Designing a crossover for a 3-way speaker is a complicated process and generally increases the overall cost of the speaker.
| Driver |
KEF Q4 Meta |
KEF Q11 Meta |
|
Driver Setup
|
2-way
|
3-way
|
|
Tweeter
|
1-inch
|
0.75-inch
|
|
Midrange
|
- |
1 x 4-inch |
|
Woofer
|
1 x 5.25-inch
|
3 x 6.5-inch
|
Q4 Meta features a 1" vented aluminum dome with MAT absorber Hard-dome Tweeter and 1 x 5.25" Aluminum Woofer with a Crossover frequency at 1.8 kHz. On the other hand, the Q11 Meta features a 0.75" vented aluminum dome with MAT absorber Hard dome Tweeter , a 4" Midrange and 3 x 6.5" Aluminum Woofer with a Crossover frequency at 480 Hz, 2.7 kHz.
Frequency Response
Q4 Meta has a frequency range of 65-20k Hz whereas Q11 Meta has a frequency range of 44-20k Hz. With a minimum frequency of 44Hz, the Q11 Meta can go significantly deeper on the low side and provide stronger bass compared to the Q4 Meta's min frequency of 65Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Surround class in our database.
Low Frequency
Surround Speakers
High Frequency
Surround Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Q4 Meta and Q11 Meta have the same Impedance of 4 ohms but where they differ is the sensitivity levels. Q4 Meta sensitivity is rated at 86 dB and the Q11 Meta's is at 89 dB. This 3 dB difference makes the KEF Q11 Meta a more sensitive speaker compared to KEF Q4 Meta, hence will play louder with the same amount of watts.
One thing to keep in mind that the lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit comared to higher impedance speakers especially at high volume levels, so make sure the amp you pair with the Q4 Meta and the Q4 Meta can provide this impedance level.
Sensitivity
Surround Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using
an amplifier within this range ensures the nominal performance , inputting a power that is higher than the
max wattage can result in a damaged speaker.
Q4 Meta can handle a max power of 225 watts RMS from the amp the whereas Q4 Meta has a max power handling value of 150 watts RMS , 75 watts less than the Q11 Meta.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Q4 Meta features Binding Post type posts and Q11 Meta has a Binding Post type posts. None of these speakers feature bi-amping/bi-wiring.
KEF Q4 Meta's Binding Post terminals
Cabinet Type and Port Position
Q4 Meta has a side firing port whereas Q11 Meta has a rear firing ports.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare KEF Q4 Meta's and KEF Q11 Meta's external dimensions. KEF Q4 Meta has external dimensions of 400 x 250 x 142 mm ( 15.7 x 9.8 x 5.6 in.) whereas KEF Q11 Meta has external dimensions of 1112 x 317 x 380 mm ( 43.8 x 12.5 x 15.0 in.) .
KEF Q11 Meta is clearly the larger of the two speakers. Its body is 67mm wider, 712mm taller and 238mm deeper than KEF Q4 Meta.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the KEF Q4 Meta is approximately 355.0cm2 / 55.0inch2 and base area of the KEF Q11 Meta is approximately 1204.6cm2 / 186.7inch2. The Q4 Meta requires 71% less surface area than the Q11 Meta which gives it a small advantage on placement in tight spaces.
What's in the Box of KEF Q4 Meta?
Here are the items that are included inside the box of Q4 Meta:
Q4 Meta Magnetic grilles (pair) Rubber feet Port bungs User manual and warranty information
What's in the Box of KEF Q11 Meta?
Here are the items that come with the Q11 Meta:
Q11 Meta Magnetic grilles Plinth and rubber feet Port bungs User manual and warranty information