Fyne Audio Vintage Ten is a 2-way Passive Bass Reflex Floor-standing speaker by Fyne Audio. It was released in 2022. It features a Tweeter and x 10" Woofer. Fyne Audio lists the drivers as 1 x 10" IsoFlare point source driver, multi-fiber bass/ midrange cone, FyneFlute surround with 75 mm titanium dome compression tweeter, neodymium magn. The speaker has a frequency range of 26-26k Hz and a sensitivity of 94 dB. Fyne Audio Vintage Ten has an MSRP of 24499$ per pair.
Room Size Suitability
The size of the room where you plan to use the Fyne Audio Vintage Ten is a crucial factor in your decision. We have assessed its suitability for various room sizes based on its dimensions and maximum power output:
| Listening Environment* |
Suitability |
| Near-field | Poor |
| Small Room | Average |
| Mid-size Room | Good |
| Large Room | Average |
| Very Large Room | Poor |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2, Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: > 400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual listening experience changes depending on floor height, room shape, surface materials, listening position, speaker locations, etc.)
Frequency Response of the Fyne Audio Vintage Ten Speaker
Fyne Audio Vintage Ten has a Frequency response range of 26-26k Hz and Power Range of 20 - 280 W watts. With a minimum frequency of 26 Hz, Vintage Ten delivers deep bass that will likely satisfy most listeners, especially those who enjoy music. However, movie enthusiasts and music fans who prefer a full range of sound may still benefit from adding a subwoofer.
Here we have a comparison of how Vintage Ten's Low frequency value compares with the average, max and min Low frequency values in its class.
Low Frequency
Floor-standing Speakers
Thinking about a subwoofer for the Fyne Audio Vintage Ten?
Among the speakers in our database at any price, these are the 2 Passive Floor-standing speakers that have deeper bass than the Fyne Audio Vintage Ten's 26Hz:
Crossover frequency of the Fyne Audio Vintage Ten?
The crossover frequency of the Vintage Ten is set to 750 Hz. This is the threshold frequency where the higher frequency signals over this level are sent to the tweeter and the lower-frequency signals are sent to the woofer by the crossover component.
Impedance and Sensitivity
Fyne Audio Vintage Ten's nominal impedance level is
8 ohms and has a sensitivity of
94 dB.
Sensitivity
Floor-standing Speakers
8 Ohms is pretty much the standard nominal impedance amongst stereo speakers and amplifiers so Fyne Audio Vintage Ten is not considered a difficult to drive speaker from nominal Impedance perspective.
Sensitivity
94dB of the Fyne Audio Vintage Ten is considered a high sensitivity compared to average stereo speaker which makes Vintage Ten an easy to drive from Sensitivity perspective. If you are planning to power your speaker with a Tube amp which are generally very low power, the Fyne Audio Vintage Ten will be a good choice. Work out how loud the Fyne Audio Vintage Ten plays in your room →
What amplifier does the Fyne Audio Vintage Ten need?
At normal listening levels in a medium room, about
3.0–60 W
per channel into 8 ohms.
Set your own conditions and we will rank every amplifier we cover.
Prefer to browse? See every integrated amplifier we cover.
Input Type
Vintage Ten features Binding post type connectors.
Work out what gauge speaker cable this run needs →
Fyne Audio Vintage Ten External Dimensions and Weight
Fyne Audio Vintage Ten has external dimensions of (Height x Width x Depth) 40.9 x 18.4 x 19.3inch (1038.9 x 467.4 x 490.2mm ).
Base Surface Area
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base area of Fyne Audio Vintage Ten is approximately 2291.2cm2 / 355.1inch2.
Find speakers that fit your shelf or alcove → · Work out where they should sit in the room →
WeightThe Fyne Audio Vintage Ten weighs 24.77kg / 54.5lbs per piece. Here is a comparison of how Vintage Ten's weight compares with the average, max and min weights in its class.
Weight
All Floor-standing Speakers
Weight
Floor-standing Speakers over $20,000
Cabinet type and Materials
Fyne Audio Vintage Ten has a
Bass Reflex type cabinet. Bass Reflex type loudspeakers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs.
Does the Fyne Audio Vintage Ten come with a Grille?
Vintage Ten comes with grilles. The purpose of the grille is to protect the delicate driver elements from external impacts while still allowing the sound to pass as clearly as possible.
Recommended Accessories
Here is a list of accessories that we think you may need for the Fyne Audio Vintage Ten.
Official Product Page
Official manufacturer's product page for the Fyne Audio Vintage Ten speaker can be found below:
Official Product Page for Fyne Audio Vintage Ten