Fyne Audio Vintage Classic XII is a 2-way Passive Bass Reflex Floor-standing speaker by Fyne Audio. It was released in 2023. It features a Tweeter and x " Woofer.
1 x 11.8" (300 mm) IsoFlare point source driver, multi-fiber bass/ midrange cone, FyneFlute surround with 75 mm titanium dome compression tweeter, fer
The speaker has a frequency range of 25-26k Hz and a sensitivity of 96 dB. Fyne Audio Vintage Classic XII has an MSRP of 11799$ per pair.
Room Size Suitability
The size of the room where you plan to use the Fyne Audio Vintage Classic XII is a crucial factor in your decision. We have assessed its suitability for various room sizes based on its dimensions and maximum power output:
| Listening Environment* |
Suitability |
| Near-field | Poor |
| Small Room | Average |
| Mid-size Room | Good |
| Large Room | Average |
| Very Large Room | Poor |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2, Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: > 400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual listening experience changes depending on floor height, room shape, surface materials, listening position, speaker locations, etc.)
**This post contains affiliate links, and we will be compensated if you make a purchase after clicking through our links. As an Amazon Associate I earn from qualifying purchases.
Frequency Response of the Fyne Audio Vintage Classic XII Speaker
Fyne Audio Vintage Classic XII has a Frequency response range of 25-26k Hz at ±3dB. With a minimum frequency of 25 Hz, Vintage Classic XII delivers deep bass that will likely satisfy most listeners, especially those who enjoy music. However, movie enthusiasts and music fans who prefer a full range of sound may still benefit from adding a subwoofer.
Here we have a comparison of how Vintage Classic XII's Low frequency value compares with the average, max and min Low frequency values in its class.
Low Frequency
Floor-standing Speakers
Fyne Audio Vintage Classic XII
Thinking about a subwoofer for the Fyne Audio Vintage Classic XII?
Among the speakers in our database with a max MSRP price of 20000$ (Pair), there is only one Passive Floor-standing speaker that have the deeper bass levels than the Fyne Audio Vintage Classic XII's 25Hz:
Crossover frequency of the Fyne Audio Vintage Classic XII?
The crossover frequency of the Vintage Classic XII is set to 750 Hz. This is the threshold frequency where the higher frequency signals over this level are sent to the tweeter and the lower-frequency signals are sent to the woofer by the crossover component.
Impedance and Sensitivity
Fyne Audio Vintage Classic XII's nominal impedance level is
8 ohms and has a sensitivity of
96 dB.
Sensitivity
Floor-standing Speakers
Fyne Audio Vintage Classic XII
8 Ohms is pretty much the standard nominal impedance amongst stereo speakers and amplifiers so Fyne Audio Vintage Classic XII is not considered a difficult to drive speaker from nominal Impedance perspective.
Sensitivity
96dB of the Fyne Audio Vintage Classic XII is considered a high sensitivity compared to average stereo speaker which makes Vintage Classic XII an easy to drive from Sensitivity perspective. If you are planning to power your speaker with a Tube amp which are generally very low power, the Fyne Audio Vintage Classic XII will be a good choice. Work out how loud the Fyne Audio Vintage Classic XII plays in your room →
What amplifier does the Fyne Audio Vintage Classic XII need?
At normal listening levels in a medium room, about
1.9–60 W
per channel into 8 ohms.
Set your own conditions and we will rank every amplifier we cover.
Prefer to browse? See every integrated amplifier we cover.
Input Type
Vintage Classic XII features Binding post type connectors. Bi-amping and Bi-wiring are not possible.
Work out what gauge speaker cable this run needs →
Fyne Audio Vintage Classic XII External Dimensions and Weight
Fyne Audio Vintage Classic XII has external dimensions of (Height x Width x Depth) 37.3 x 21.7 x 16.6inch (947.4 x 551.2 x 421.6mm ).
Base Surface Area
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base area of Fyne Audio Vintage Classic XII is approximately 2323.9cm2 / 360.2inch2.
Find speakers that fit your shelf or alcove → · Work out where they should sit in the room →
WeightThe Fyne Audio Vintage Classic XII weighs 54.43kg / 119.7lbs per piece. Here is a comparison of how Vintage Classic XII's weight compares with the average, max and min weights in its class.
Weight
All Floor-standing Speakers
Fyne Audio Vintage Classic XII
Weight
Floor-standing Speakers under $20000
Fyne Audio Vintage Classic XII
Cabinet type and Materials
Fyne Audio Vintage Classic XII has a
Bass Reflex type cabinet. Bass Reflex type loudspeakers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs.
Does the Fyne Audio Vintage Classic XII come with a Grille?
Vintage Classic XII comes with grilles. The purpose of the grille is to protect the delicate driver elements from external impacts while still allowing the sound to pass as clearly as possible.
Recommended Accessories
Here is a list of accessories that we think you may need for the Fyne Audio Vintage Classic XII.
Official Product Page
Official manufacturer's product page for the Fyne Audio Vintage Classic XII speaker can be found below:
Official Product Page for Fyne Audio Vintage Classic XII