In this review, we will be comparing RP-500M II and RP-600M II, two Passive Bookshelf speakers by Klipsch Let's have a brief look at the main features
of Klipsch RP-500M II and Klipsch RP-600M II first before getting into our more
detailed comparison.
RP-500M II and RP-600M II are members of Klipsch's Reference Premiere (RP) II series of speakers. Below you can find the loudspeakers from this series.
Klipsch Reference Premiere (RP) II Series History
What size room are the Klipsch RP-500M II and Klipsch RP-600M II speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Klipsch RP-500M II and Klipsch RP-600M II compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both RP-500M II and RP-600M II are 2-way speakers.
| Driver |
Klipsch RP-500M II |
Klipsch RP-600M II |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 5.25-inch
|
1 x 6.5-inch
|
RP-500M II features a 1" titanium Hybrid Tractrix Horn Tweeter and 1 x 5.25" Cerametallic cone Woofer with a Crossover frequency at 1530 Hz. On the other hand, the RP-600M II features a 1" titanium Hybrid Tractrix Horn Tweeter and 1 x 6.5" Cerametallic cone Woofer with a Crossover frequency at 1500 Hz.
Frequency Response
RP-500M II has a frequency range of 50-25k Hz whereas RP-600M II has a frequency range of 44-25k Hz. With a minimum frequency of 44Hz, the RP-600M II can go significantly deeper on the low side and provide stronger bass compared to the RP-500M II's min frequency of 50Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
RP-500M II and RP-600M II have the same Impedance of 8 ohms but where they differ is the sensitivity levels. RP-500M II sensitivity is rated at 92 dB and the RP-600M II's is at 94.5 dB. This 2 dB difference makes the Klipsch RP-600M II a more sensitive speaker compared to Klipsch RP-500M II, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
RP-500M II can handle a max power of 100 watts RMS from the amp the whereas RP-500M II has a max power handling value of 75 watts RMS , 25 watts less than the RP-600M II.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
RP-600M II features Binding post posts which make bi-amping or bi-wiring possible. RP-500M II has a Binding post which doesn't feature bi-amping/bi-wiring.
Klipsch RP-500M II's Binding post terminals
Klipsch RP-600M II's Binding post terminals allows Bi-amping or bi-wiring
Cabinet Type and Port Position
Both RP-500M II and RP-600M II have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Klipsch RP-500M II's and Klipsch RP-600M II's external dimensions. Klipsch RP-500M II has external dimensions of 345.0 x 175.0 x 270.0mm ( 13-9/16 x 6-7/8 x 10-5/8inch) whereas Klipsch RP-600M II has external dimensions of 402.0 x 204.0 x 332.0mm ( 15-13/16 x 8 x 13-1/16inch) .
Klipsch RP-600M II is clearly the larger of the two speakers. Its body is 29mm wider, 57mm taller and 62mm deeper than Klipsch RP-500M II.
Below you can see the front view size comparison of Klipsch RP-500M II and Klipsch RP-600M II in scale.
Comparison image of Klipsch RP-500M II and Klipsch RP-600M II Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Klipsch RP-500M II is approximately 472.5cm2 / 73.2inch2 and base area of the Klipsch RP-600M II is approximately 677.3cm2 / 105.0inch2. The RP-500M II requires 30% less surface area than the RP-600M II which gives it a small advantage on placement in tight spaces.
Here is an another comparison that shows both speakers on a BDI Octave Media Cabinet, next to a standard size amplifier and turntable in scale:
Size Comparison image of Klipsch RP-500M II and Klipsch RP-600M II on a Media Console
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Klipsch RP-500M II weighs 6.00kg / 13.2lbs and the Klipsch RP-600M II weighs 8.20kg / 18lbs. This makes the RP-600M II 37% heavier than the RP-500M II.
Here is a comparison of how RP-500M II and RP-600M II's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of Klipsch RP-500M II?
Here are the items that are included inside the box of RP-500M II:
2 Bookshelf loudspeakers2 GrillesUser ManualImportant Safety InstructionsWarranty Information
What's in the Box of Klipsch RP-600M II?
Here are the items that come with the RP-600M II:
2 Bookshelf loudspeakers2 Grilles4 Terminal jumpers (pre-installed)User ManualImportant Safety InstructionsWarranty Information
 Height |
345mm
vs
402mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
472cm2 (175x270mm)
vs
677cm2 (204x332mm)
|
Takes less floor space |
 Max Input Power |
100 watts
vs
75 watts
|
Handle more power from your amplifier |
 Sensitivity |
94 dB
vs
92 dB
|
Play louder with same amount of amplification power |
 Woofer Size |
6.5 inches
vs
5.25 inches
|
Larger woofer |
| Low Frequency Response |
44 Hz
vs
50 Hz
|
Generates deeper bass |
 Bi-Amping and Bi-Wiring |
Yes
vs
No
|
Allows bi-amping and bi-wiring connections |
 Price per pair* |
459USD
vs
599USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
Klipsch Reference Premiere RP-500M II |
Klipsch Reference Premiere RP-600M II |
| Brand |
Klipsch |
Klipsch |
| Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
| Power Range |
up to 75 watts |
up to 100 watts |
| Sensitivity |
92 dB |
94.5 dB |
| Impedance |
8 ohms |
8 ohms |
| Frequency Response |
50-25k Hz |
44-25k Hz |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
5.25" |
6.5" |
| Woofer Composition |
Cerametallic cone |
Cerametallic cone |
| Woofer Surround Material |
Rubber |
Rubber |
| Tweeter Size |
1" |
1" |
| Tweeter Type |
Hybrid Tractrix Horn |
Hybrid Tractrix Horn |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
1530 Hz |
1500 Hz |
| Firing Direction |
rear |
rear |
Physical Specs |
|
|
| Height |
345.0mm (13.6") |
402.0mm (15.8") |
| Width |
175.0mm (6.9") |
204.0mm (8") |
| Depth |
270.0mm (10.6") |
332.0mm (13.1") |
| Weight |
6.00kg (13.2lbs) |
8.20kg (18lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
MDF/Wood-grain vinyl |
MDF/Wood-grain vinyl |
| Available Colors |
Walnut, Black |
Walnut, Black |
| Mounting Bracket |
|
|
| Recommended Stand Height |
24-28" |
22-26" |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
No |
Yes |
Other |
|
|
| Parts Warranty |
5 Years |
5 Years |
| Labor Warranty |
5 Years |
5 Years |