In this review, we will be comparing two different type of speakers by Klipsch. Klipsch Reference Premiere RP-600M II is a Bookshelf speaker whereas the RP-8000F II is a Floor-standing speaker.
Let's have a brief look at the main features
of Klipsch RP-600M II and Klipsch RP-8000F II first before getting into our more
detailed comparison.
Klipsch RP-600M II Key Specs
- 2-way Design
- 1" Hybrid Tractrix Horn Tweeter
- 6.5" Cerametallic cone Woofer
- 44-25k Hz Frequency Response
- 94.5 dB Sensitivity
- Impedance: 8ohms
- Power Range:up to 100watts
- Weight:8.20kg
- Dimensions (H x W x D): 402.0" x 8" x 13-1/16"( 402.0 x 204.0 x 332.0mm )
Klipsch RP-8000F II Key Specs
- 2-way Design
- 1" Tractrix Horn Tweeter
- 2 x 8" Cerametallic cone Woofer
- 32-25k Hz Frequency Response
- 98 dB Sensitivity
- Impedance: 8ohms
- Power Range:up to 150watts
- Weight:28.00kg
- Dimensions (H x W x D): 1097.0" x 10-7/8" x 17-9/16"( 1097.0 x 277.0 x 447.0mm )
RP-600M II and RP-8000F II are members of Klipsch's Reference Premiere (RP) II series of speakers. Below you can find the loudspeakers from this series.
Klipsch Reference Premiere (RP) II Series History
What size room are the Klipsch RP-600M II and Klipsch RP-8000F II speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
| Listening Environment* |
Klipsch RP-600M II |
Klipsch RP-8000F II |
| Near-field |
Average |
Bad |
| Small Room |
Good |
Poor |
| Mid-size Room |
Average |
Good |
| Large Room |
Poor |
Good |
| Very Large Room |
Bad |
Poor |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2, Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: > 400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual listening experience changes depending on floor height, room shape, surface materials, listening position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the Klipsch RP-600M II and Klipsch RP-8000F II compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both RP-600M II and RP-8000F II are 2-way speakers.
| Driver |
Klipsch RP-600M II |
Klipsch RP-8000F II |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 6.5-inch
|
2 x 8-inch
|
RP-600M II features a 1" titanium Hybrid Tractrix Horn Tweeter and 1 x 6.5" Cerametallic cone Woofer with a Crossover frequency at 1500 Hz. On the other hand, the RP-8000F II features a 1" titanium Tractrix Horn Tweeter and 2 x 8" Cerametallic cone Woofer with a Crossover frequency at 1630 Hz.
Frequency Response
RP-600M II has a frequency range of 44-25k Hz whereas RP-8000F II has a frequency range of 32-25k Hz. With a minimum frequency of 32Hz, the RP-8000F II can go significantly deeper on the low side and provide stronger bass compared to the RP-600M II's min frequency of 44Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
RP-600M II and RP-8000F II have the same Impedance of 8 ohms but where they differ is the sensitivity levels. RP-600M II sensitivity is rated at 94.5 dB and the RP-8000F II's is at 98 dB. This 4 dB difference makes the Klipsch RP-8000F II a more sensitive speaker compared to Klipsch RP-600M II, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
RP-600M II can handle a max power of 150 watts RMS from the amp the whereas RP-600M II has a max power handling value of 100 watts RMS , 50 watts less than the RP-8000F II.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Both RP-600M II and RP-8000F II features dual binding post speaker terminals for bi-amping or bi-wiring.
Klipsch RP-600M II's Binding post terminals allows Bi-amping or bi-wiring
Klipsch RP-8000F II's Binding post terminals allows Bi-amping or bi-wiring
Cabinet Type and Port Position
Both RP-600M II and RP-8000F II have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Klipsch RP-600M II's and Klipsch RP-8000F II's external dimensions. Klipsch RP-600M II has external dimensions of 402.0 x 204.0 x 332.0mm ( 15-13/16 x 8 x 13-1/16inch) whereas Klipsch RP-8000F II has external dimensions of 1097.0 x 277.0 x 447.0mm ( 43-3/16 x 10-7/8 x 17-9/16inch) .
Klipsch RP-8000F II is clearly the larger of the two speakers. Its body is 73mm wider, 695mm taller and 115mm deeper than Klipsch RP-600M II.
Below you can see the front view size comparison of Klipsch RP-600M II and Klipsch RP-8000F II in scale.
Comparison image of Klipsch RP-600M II and Klipsch RP-8000F II Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Klipsch RP-600M II is approximately 677.3cm2 / 105.0inch2 and base area of the Klipsch RP-8000F II is approximately 1238.2cm2 / 191.9inch2. The RP-600M II requires 45% less surface area than the RP-8000F II which gives it a small advantage on placement in tight spaces.
What's in the Box of Klipsch RP-600M II?
Here are the items that are included inside the box of RP-600M II:
2 Bookshelf loudspeakers2 Grilles4 Terminal jumpers (pre-installed)User ManualImportant Safety InstructionsWarranty Information
What's in the Box of Klipsch RP-8000F II?
Here are the items that come with the RP-8000F II:
Floorstanding loudspeakerStabilizer feet (pre-installed)Grille2 Terminal jumpers (pre-installed)Rubber cap (pre-installed)User ManualImportant Safety InstructionsWarranty Information
Height 
Base Surface Area 
Price per pair* 
Max Input Power 
Sensitivity 
Woofer Size 
Dolby Atmos Drivers