In this review, we will be comparing RP-8000F II and RP-5000F II, two Passive Floor-standing speakers by Klipsch Let's have a brief look at the main features
of Klipsch RP-8000F II and Klipsch RP-5000F II first before getting into our more
detailed comparison.
RP-8000F II and RP-5000F II are members of Klipsch's Reference Premiere (RP) II series of speakers. Below you can find the loudspeakers from this series.
Klipsch Reference Premiere (RP) II Series History
What size room are the Klipsch RP-8000F II and Klipsch RP-5000F II speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Klipsch RP-8000F II and Klipsch RP-5000F II compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both RP-8000F II and RP-5000F II are 2-way speakers.
| Driver |
Klipsch RP-8000F II |
Klipsch RP-5000F II |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
2 x 8-inch
|
2 x 5.25-inch
|
RP-8000F II features a 1" titanium Tractrix Horn Tweeter and 2 x 8" Cerametallic cone Woofer with a Crossover frequency at 1630 Hz. On the other hand, the RP-5000F II features a 1" titanium Tractrix Horn Tweeter and 2 x 5.25" Cerametallic cone Woofer with a Crossover frequency at 1900 Hz.
Frequency Response
RP-8000F II has a frequency range of 32-25k Hz whereas RP-5000F II has a frequency range of 35-25k Hz. With a minimum frequency of 32Hz, the RP-8000F II can go slightly deeper then the RP-5000F II's min frequency of 35Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
RP-8000F II and RP-5000F II have the same Impedance of 8 ohms but where they differ is the sensitivity levels. RP-8000F II sensitivity is rated at 98 dB and the RP-5000F II's is at 95 dB. This 3 dB difference makes the Klipsch RP-8000F II a more sensitive speaker compared to Klipsch RP-5000F II, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
RP-8000F II can handle a max power of 150 watts RMS from the amp the whereas RP-5000F II has a max power handling value of 100 watts RMS, 50 watts less than the RP-8000F II.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Both RP-8000F II and RP-5000F II features dual binding post speaker terminals for bi-amping or bi-wiring.
Klipsch RP-8000F II's Binding post terminals allows Bi-amping or bi-wiring
Klipsch RP-5000F II's Binding post terminals allows Bi-amping or bi-wiring
Cabinet Type and Port Position
Both RP-8000F II and RP-5000F II have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Klipsch RP-8000F II's and Klipsch RP-5000F II's external dimensions. Klipsch RP-8000F II has external dimensions of 1097.0 x 277.0 x 447.0mm ( 43-3/16 x 10-7/8 x 17-9/16inch) whereas Klipsch RP-5000F II has external dimensions of 918.0 x 208.0 x 364.0mm ( 36-1/8 x 8-3/16 x 14-5/16inch) .
Klipsch RP-8000F II is clearly the larger of the two speakers. Its body is 69mm wider, 179mm taller and 83mm deeper than Klipsch RP-5000F II.
Below you can see the front view size comparison of Klipsch RP-8000F II and Klipsch RP-5000F II in scale.
Comparison image of Klipsch RP-8000F II and Klipsch RP-5000F II Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Klipsch RP-8000F II is approximately 1238.2cm2 / 191.9inch2 and base area of the Klipsch RP-5000F II is approximately 757.1cm2 / 117.4inch2. The RP-8000F II requires 64% more surface area than the RP-5000F II which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Klipsch RP-8000F II weighs 28.00kg / 61.6lbs and the Klipsch RP-5000F II weighs 17.50kg / 38.5lbs. This makes the RP-8000F II 60% heavier than the RP-5000F II.
Here is a comparison of how RP-8000F II and RP-5000F II's weights compare with the average, max and min weights in Passive Floor-standing class.
Weight
All Floor-standing Speakers
What's in the Box of Klipsch RP-8000F II?
Here are the items that are included inside the box of RP-8000F II:
Floorstanding loudspeakerStabilizer feet (pre-installed)Grille2 Terminal jumpers (pre-installed)Rubber cap (pre-installed)User ManualImportant Safety InstructionsWarranty Information
What's in the Box of Klipsch RP-5000F II?
Here are the items that come with the RP-5000F II:
Floorstanding loudspeakerStabilizer feet (pre-installed)Grille2 Terminal jumpers (pre-installed)Rubber cap (pre-installed)User ManualImportant Safety InstructionsWarranty Information
 Max Input Power |
150 watts
vs
100 watts
|
Handle more power from your amplifier |
 Sensitivity |
98 dB
vs
95 dB
|
Play louder with same amount of amplification power |
 Woofer Size |
8 inches
vs
5.25 inches
|
Larger woofer |
| Low Frequency Response |
32 Hz
vs
35 Hz
|
Generates deeper bass |
 Height |
918mm
vs
1097mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
757cm2 (208x364mm)
vs
1238cm2 (277x447mm)
|
Takes less floor space |
 Price per pair* |
1198USD
vs
1798USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
Klipsch Reference Premiere RP-8000F II |
Klipsch Reference Premiere RP-5000F II |
| Brand |
Klipsch |
Klipsch |
| Speaker Type |
Floor-standing speaker |
Floor-standing speaker |
| Power Range |
up to 150 watts |
up to 100 watts |
| Sensitivity |
98 dB |
95 dB |
| Impedance |
8 ohms |
8 ohms |
| Frequency Response |
32-25k Hz |
35-25k Hz |
Drivers |
|
|
| Woofer Quantity |
2 |
2 |
| Woofer Size |
8" |
5.25" |
| Woofer Composition |
Cerametallic cone |
Cerametallic cone |
| Woofer Surround Material |
Rubber |
Rubber |
| Tweeter Size |
1" |
1" |
| Tweeter Type |
Tractrix Horn |
Tractrix Horn |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
1630 Hz |
1900 Hz |
| Firing Direction |
rear |
rear |
Physical Specs |
|
|
| Height |
1097.0mm (43.2") |
918.0mm (36.1") |
| Width |
277.0mm (10.9") |
208.0mm (8.2") |
| Depth |
447.0mm (17.6") |
364.0mm (14.3") |
| Weight |
28.00kg (61.6lbs) |
17.50kg (38.5lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
MDF/Wood-grain vinyl |
MDF/Wood-grain vinyl |
| Available Colors |
Walnut, Black |
Walnut, Black |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
Yes |
Yes |
Other |
|
|
| Parts Warranty |
5 Years |
5 Years |
| Labor Warranty |
5 Years |
5 Years |