In this review, we will be comparing two different type of speakers by Klipsch. Klipsch Reference Premiere RP-500M II is a Bookshelf speaker whereas the RP-500C II is a Center Channel speaker.
Let's have a brief look at the main features
of Klipsch RP-500M II and Klipsch RP-500C II first before getting into our more
detailed comparison.
RP-500M II and RP-500C II are members of Klipsch's Reference Premiere (RP) II series of speakers. Below you can find the loudspeakers from this series.
Klipsch Reference Premiere (RP) II Series History
What size room are the Klipsch RP-500M II and Klipsch RP-500C II speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Klipsch RP-500M II and Klipsch RP-500C II compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both RP-500M II and RP-500C II are 2-way speakers.
| Driver |
Klipsch RP-500M II |
Klipsch RP-500C II |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 5.25-inch
|
2 x 5.25-inch
|
RP-500M II features a 1" titanium Hybrid Tractrix Horn Tweeter and 1 x 5.25" Cerametallic cone Woofer with a Crossover frequency at 1530 Hz. On the other hand, the RP-500C II features a 1" titanium Tractrix Horn Tweeter and 2 x 5.25" Cerametallic cone Woofer with a Crossover frequency at 1630 Hz.
Frequency Response
RP-500M II has a frequency range of 50-25k Hz whereas RP-500C II has a frequency range of 60-25k Hz. With a minimum frequency of 50Hz, the RP-500M II can go significantly deeper on the low side and provide stronger bass compared to the RP-500C II's min frequency of 60Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
RP-500M II and RP-500C II have the same Impedance of 8 ohms but where they differ is the sensitivity levels. RP-500M II sensitivity is rated at 92 dB and the RP-500C II's is at 96 dB. This 4 dB difference makes the Klipsch RP-500C II a more sensitive speaker compared to Klipsch RP-500M II, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
RP-500M II can handle a max power of 100 watts RMS from the amp the whereas RP-500M II has a max power handling value of 75 watts RMS , 25 watts less than the RP-500C II.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
RP-500M II features Binding post type posts and RP-500C II has a Binding post type posts. None of these speakers feature bi-amping/bi-wiring.
Klipsch RP-500M II's Binding post terminals
Cabinet Type and Port Position
Both RP-500M II and RP-500C II have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Klipsch RP-500M II's and Klipsch RP-500C II's external dimensions. Klipsch RP-500M II has external dimensions of 345.0 x 175.0 x 270.0mm ( 13-9/16 x 6-7/8 x 10-5/8inch) whereas Klipsch RP-500C II has external dimensions of 177.0 x 494.0 x 269.0mm ( 6-15/16 x 19-7/16 x 10-9/16inch) .
Klipsch RP-500C II is 168mm shorter and 1mm less deeper than Klipsch RP-500M II but it is also 319mm wider.
Below you can see the front view size comparison of Klipsch RP-500M II and Klipsch RP-500C II in scale.
Comparison image of Klipsch RP-500M II and Klipsch RP-500C II Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Klipsch RP-500M II is approximately 472.5cm2 / 73.2inch2 and base area of the Klipsch RP-500C II is approximately 1328.9cm2 / 206.0inch2. The RP-500M II requires 64% less surface area than the RP-500C II which gives it a small advantage on placement in tight spaces.
What's in the Box of Klipsch RP-500M II?
Here are the items that are included inside the box of RP-500M II:
2 Bookshelf loudspeakers2 GrillesUser ManualImportant Safety InstructionsWarranty Information
What's in the Box of Klipsch RP-500C II?
Here are the items that come with the RP-500C II:
Center channel loudspeakerGrilleTilt rod (attached nut)User ManualImportant Safety InstructionsWarranty Information