No single best amplifier here. What decides it is what you have to drive, what you need to plug in, and how much of the system you want in one box.
| Area | Better | Why |
|---|
| Power | evenly matched | Effectively the same output - 70W against 60W into 8 ohms is under 1dB, which is not an audible difference in loudness. |
| Room size | depends | We rate Audiolab 7000A the better fit for a mid-size room, a large room and a very large room, and Rotel A12 for desk or near-field listening and a small room. Match the amplifier to the room you actually have, not the one you want. |
| Noise floor | A | Audiolab 7000A is the quieter design on paper - 110dB against 100dB. Audible mainly with sensitive speakers in a quiet room. |
| Built-in DAC | A | Both decode on board, but only Audiolab 7000A handles DSD and MQA. |
| Analogue inputs | B | Rotel A12 takes more analogue sources - 4 against 3. |
| Room to grow | A | Only Audiolab 7000A offers a pre-out/main-in loop - which decides whether you can add a subwoofer or a power amplifier later without replacing the box. |
| Price | B | Rotel A12 costs less - $800 against $999 at list. |
A Audiolab 7000A B Rotel A12
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both amplifiers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
The usual trade-off: Audiolab 7000A measures better, Rotel A12 costs about 20% less. With most speakers in most rooms that gap is smaller in practice than it looks here.
What a spec sheet cannot show: how either sounds with your speakers, how the controls feel day to day, and what the app is like to live with - which is where most all-in-one amplifiers are actually won or lost. Power figures are the manufacturers' own and are not measured to a common standard, so treat small differences as noise. If you can hear both, that will tell you more than any row above.