One is a streaming all-in-one and the other is an amplifier. Judge them on how many boxes you want and what you already own, not on the spec sheet alone.
| Area | Better | Why |
|---|
| Power | evenly matched | Effectively the same output - 50W against 60W into 8 ohms is under 1dB, which is not an audible difference in loudness. |
| Grip on hard loads | A | Audiolab 6000A holds up better into a 4-ohm load: its output increases strongly to 75W, where the other increases modestly. That matters with demanding speakers far more than the 8-ohm figure does. |
| Noise floor | B | Marantz PM7000N is the quieter design on paper - 115dB against 76dB. Audible mainly with sensitive speakers in a quiet room. |
| Built-in DAC | evenly matched | Both have a DAC on board with much the same capability. |
| Streaming | B | Only Marantz PM7000N has AirPlay 2, Roon and HEOS. |
| Analogue inputs | A | Audiolab 6000A takes more analogue sources - 4 against 3. |
| Room to grow | A | Only Audiolab 6000A offers a pre-out/main-in loop - which decides whether you can add a subwoofer or a power amplifier later without replacing the box. |
| Price | A | Audiolab 6000A costs less - $899 against $1,299 at list. |
A Audiolab 6000A B Marantz PM7000N
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both amplifiers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
Audiolab 6000A has the edge on paper, though not by much. The rows marked "depends" are more likely to decide this than the score is. If your speakers are a difficult load - 4 ohms nominal, big woofers, or a sensitivity in the low 80s - Audiolab 6000A is the safer partner, because how an amplifier behaves when the impedance drops matters more than its 8-ohm rating. Think about the whole system: the roughly $400 saved by taking the cheaper one would buy better speakers or a subwoofer, which does more for the sound than the difference between two competent amplifiers.
What a spec sheet cannot show: how either sounds with your speakers, how the controls feel day to day, and what the app is like to live with - which is where most all-in-one amplifiers are actually won or lost. Power figures are the manufacturers' own and are not measured to a common standard, so treat small differences as noise. If you can hear both, that will tell you more than any row above.