The No.534 is a stereo power amplifier by Mark Levinson that delivers 250 watts x 2 channels into 8 ohms and 500 watts x 2 channels into 4 ohms, with 2 ohm stability. It was released in 2016. It is a 2-channel design using a Class A/B output stage. Speakers connect via binding posts. A minimum impedance of 2 ohms makes it compatible with a wide range of loudspeakers. The Mark Levinson No.534 has an MSRP of $25,000.
There are 2 Mark Levinson amplifiers in our database. Below you can see the main specs of these amps.
Mark Levinson Power Amplifier Series
Performance Specs
One of the most important factors when deciding on an integrated amplifier is its power ratings and compatibility with your speaker's impedance requirements. The Mark Levinson No.534 is rated at 250 watts RMS into 8-ohms.
Here are the main highlights of its performance specs:
- 250 watts into 8-ohms
- 500 watts into 4-ohms
How loud will 250 watts actually play in your room? →
Wiring more than one pair of speakers to it? Check the load first →
Which speakers suit the Mark Levinson No.534?
250 W into 8 ohms, 500 W into 4, rated down to 2 ohms.
We rank every passive speaker we cover against it on power, impedance safety and current
delivery.
Need more power?
Mark Levinson No.534 is rated at 250 watts into 8 ohms, which puts it in our Over 180 watts band. That is the top band we cover, so there is no step up from here - if it is not enough, the answer is more sensitive speakers or a smaller room, not more watts.
When pairing the Mark Levinson No.534 with a passive Bookshelf (Stand mount) or Passive Floor Standing (Tower) speaker, you have to check if their Max Power Range is below the max wattage of the amp for the given impedance levels.
Operating your amp outside of this max range may damage the speakers.
What size of room is the Mark Levinson No.534 Amplifier good for?
An essential deciding factor is the size of the room in which you intend to employ the Mark Levinson No.534 amplifier. Here, taking into account its maximum power parameters, we analyzed its applicability to various size environments:
| Listening Environment |
Suitability |
| Near-field | Are you nuts? |
| Small Room | Bad |
| Mid-size Room | Poor |
| Large Room | Good |
| Very Large Room | Good |
Inputs and Outputs
Besides the performance specs of the Mark Levinson No.534, the next important feature set that you have to evaluate is the input and output selections that it offers.
Mark Levinson No.534 has total of 2 Analog inputs .
Inputs
- Total Number of Analog Inputs: 2
Outputs
Bluetooth Connectivity
Mark Levinson No.534 doesn't have bluetooth connectivity feature. In order to stream your music via bluetooth, the easiest way is to connect an external bluetooth receiver to your Mark Levinson No.534. Two bluetooth receivers that we recommend are the
iFi Zen Blue V2 and the
Audioengine B1.
Phono Input
Mark Levinson No.534 doesn't have a phono input so in order to play your vinyl albums, Mark Levinson No.534 has to be paired with a Phono Preamp that is MM (Moving Magnet) or/and MC (Moving COil) depending on your cartridge type.
Balanced connections
Mark Levinson No.534 has a balanced XLR input. A balanced cable carries the signal twice, on two conductors of opposite polarity. Interference picked up along the way lands on both equally and cancels when the two are recombined at the far end, so the longer the cable run and the noisier the surroundings, the more the connection is worth. Whether a balanced connection also yields more power depends on how the amplifier is built inside - some are balanced end to end, others convert to single-ended internally and deliver the same power either way, so it is worth reading the maker's own wording rather than assuming.
Mark Levinson No.534 External Dimensions and Weight
Mark Levinson No.534 has external dimensions of (H x W x D) .
- Width: mm (")
- Height: mm (")
- Depth: mm (")
- Weight: —
- Base Surface Area: ~cm2 / 0.0inch2
- Volume: ~0.0 liter / 0.0 gallon
Available colors
Mark Levinson No.534 is available in Black color options.
| General |
| Brand |
Mark Levinson |
| Full Model Name |
Mark Levinson No.534 |
| Release Date |
2016 |
| Amplifier Type |
Power Amplifier |
| Number of Channels |
2 |
| Amp Class |
Class A/B |
| Amplifier Technology |
Solid State |
| Performance |
| Watts RMS per Channel into 8-ohms |
250 watts |
| Watts RMS per Channel into 6-ohms |
N/A |
| Watts RMS per Channel into 4-ohms |
500 watts |
| Frequency Bandwidth |
|
| THD |
|
| Minimum Impedance |
2 |
| Signal to Noise Ratio |
N/A |
| Digital Music |
| Built-in DAC |
No |
| Bluetooth |
No |
| WiFi |
No |
| CONNECTIONS |
| Total Analog Inputs |
2 |
| Phono Input |
No |
| Headphone Output |
No |
| Removable Power Cord |
|
| Speaker Connectors |
Binding posts |
| PHYSICAL SPECS |
| Height |
mm (") |
| Width |
mm (") |
| Depth |
mm (") |
| Weight |
— |
| Available Colors |
Black |
| OTHER |
| Parts Warranty |
|
| Labor Warranty |
|
How much power does the Mark Levinson No.534 have?
The Mark Levinson No.534 delivers 250 watts x 2 channels into 8 ohms and 500 watts x 2 channels into 4 ohms, with 2 ohm stability. Its output almost doubles into 4 ohms, which points to a strong power supply that can hold its composure with demanding, low-impedance speakers.
Does the Mark Levinson No.534 use vacuum tubes?
No. The Mark Levinson No.534 is a solid-state amplifier - there are no vacuum tubes in it.
What amplifier class is the Mark Levinson No.534?
The Mark Levinson No.534 uses a Class A/B amplifier design. Class A/B is the traditional linear design: it runs warmer and is less efficient than Class D, but it is long valued for its natural, low-distortion sound.
Does the Mark Levinson No.534 have a built-in DAC?
No. The Mark Levinson No.534 has no built-in DAC, so a digital source such as a streamer or CD transport needs its own converter, or you connect it over analogue.
Can I connect a turntable to the Mark Levinson No.534?
No. The Mark Levinson No.534 has no phono input, so a turntable needs an external phono preamp (or a deck with one built in) before it can be connected.
Does the Mark Levinson No.534 have Bluetooth?
No. The Mark Levinson No.534 does not have Bluetooth built in; you would need an external Bluetooth receiver connected to one of its inputs.
Does the Mark Levinson No.534 have a headphone output?
No. The Mark Levinson No.534 does not have a headphone output, so headphone listening needs a separate headphone amplifier.
How much does the Mark Levinson No.534 cost?
The Mark Levinson No.534 has a manufacturer's list price (MSRP) of $25,000.
Was this amplifier review useful?
Tell us what is missing or wrong and we will fix it.