Sonus faber Olympica III is a 3-way Passive Bass Reflex Floor-standing speaker by Sonus faber. It was released in September 2019. It features a 1.1" Soft-Dome Tweeter, 1 x 6.5" Midrange and 2 x 6.5" Paper Woofer.
A 3-way ported floorstander with a 1.1 inch tweeter, a 6.5 inch midrange and 2 x 6.5 inch woofers. 90 dB sensitive, 4 ohms, 50-300 W recommended, 42 Hz to 40 kHz. Olympica pairs the lute cabinet with the DAD Arrow Point silk tweeter and Camelia paper cones.
The speaker has a frequency range of 42-40k Hz and a sensitivity of 90 dB. Sonus faber Olympica III has an MSRP of 13500$ per pair.
Room Size Suitability
The size of the room where you plan to use the Sonus faber Olympica III is a crucial factor in your decision. We have assessed its suitability for various room sizes based on its dimensions and maximum power output:
| Listening Environment* |
Suitability |
| Near-field | Poor |
| Small Room | Average |
| Mid-size Room | Good |
| Large Room | Average |
| Very Large Room | Poor |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2, Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: > 400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual listening experience changes depending on floor height, room shape, surface materials, listening position, speaker locations, etc.)
Sonus faber's Olympica Series of Loudspeakers
Olympica III is a member of Sonus faber's Olympica series of Passive speakers. Below you can see the main specs of these speakers.
See all 5 Sonus faber Olympica models compared »
Sonus faber Olympica Series Speakers
Frequency Response of the Sonus faber Olympica III Speaker
Sonus faber Olympica III has a Frequency response range of 42-40k Hz and Power Range of 50-300 watts. With a minimum frequency of 42 Hz, Olympica III delivers deep bass that will likely satisfy most listeners, especially those who enjoy music. However, movie enthusiasts and music fans who prefer a full range of sound may still benefit from adding a subwoofer.
Here we have a comparison of how Olympica III's Low frequency value compares with the average, max and min Low frequency values in its class.
Low Frequency
Floor-standing Speakers
Thinking about a subwoofer for the Sonus faber Olympica III?
Among the speakers in our database with a max MSRP price of 20000$ (Pair), these are the 5 Passive Floor-standing speakers that have the deeper bass levels than the Sonus faber Olympica III's 42Hz:
Crossover frequency of the Sonus faber Olympica III?
Olympica III is a 3-way speaker and its crossover frequency between the woofer and the midrange is set to 365 Hz and the crossover frequency between the midrange and the tweeter is set to 2460 Hz.
Impedance and Sensitivity
Sonus faber Olympica III's nominal impedance level is
4 ohms and has a sensitivity of
90 dB.
Sensitivity
Floor-standing Speakers
Nominal Impedance of the 4 Ohms means that the Sonus faber Olympica III is a difficult to drive speaker from nominal Impedance perspective, make sure that you choose an amplifier than can provide 4 Ohms for this speaker.
Many AVRs (audio/video receiver) in the market may have difficulty when the speakers dip below the 4 Ohms levels (this may cause clipping or even physical damage), so we recommend to not pair the Sonus faber Olympica III with an AVR but use an Integrated Amplifier instead.
Sensitivity
90dB of the Sonus faber Olympica III is an average sensitivity for stereo speaker so it is neither easy nor difficult to drive Sensitivity wise. Work out how loud the Sonus faber Olympica III plays in your room →
Running more than one pair from a single amplifier? Check the load it would present →
What amplifier does the Sonus faber Olympica III need?
At normal listening levels in a medium room, about
15–240 W
per channel into 4 ohms.
Set your own conditions and we will rank every amplifier we cover.
Prefer to browse? See every integrated amplifier we cover.
Input Type
Olympica III has Binding post type connectors and lets bi-amping/bi-wiring. Bi-wiring can enhance the overall transparency of your loudspeakers by using separate speaker wires for the low and high-frequency drivers from a single amplifier. Bi-amping, on the other hand, involves using separate amplifiers for the high and low-frequency drivers, potentially resulting in a greater dynamic range and reduced distortion.
Work out what gauge speaker cable this run needs →
Sonus faber Olympica III External Dimensions and Weight
Sonus faber Olympica III has external dimensions of (Height x Width x Depth) 43-7/16 x 14-13/16 x 18-1/16inch (1104.0 x 376.0 x 459.0mm ).
Base Surface Area
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base area of Sonus faber Olympica III is approximately 1725.8cm2 / 267.5inch2.
Find speakers that fit your shelf or alcove → · Work out where they should sit in the room →
WeightThe Sonus faber Olympica III weighs 35.00kg / 77lbs per piece. Here is a comparison of how Olympica III's weight compares with the average, max and min weights in its class.
Weight
All Floor-standing Speakers
Weight
Floor-standing Speakers under $20000
Cabinet type and Materials
Sonus faber Olympica III has a
Bass Reflex type cabinet. Bass Reflex type loudspeakers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs.
Does the Sonus faber Olympica III come with a Grille?
Olympica III comes with grilles. The purpose of the grille is to protect the delicate driver elements from external impacts while still allowing the sound to pass as clearly as possible.
Recommended Accessories
Here is a list of accessories that we think you may need for the Sonus faber Olympica III.
Official Product Page
Official manufacturer's product page for the Sonus faber Olympica III speaker can be found below:
Official Product Page for Sonus faber Olympica III