In this review, we will be comparing two different type of speakers by Sonus faber. Sonus faber Olympica III is a Floor-standing speaker whereas the Olympica I is a Bookshelf speaker.
Let's have a brief look at the main features
of Sonus faber Olympica III and Sonus faber Olympica I first before getting into our more
detailed comparison.
Sonus faber Olympica III Key Specs
- 3-way Design
- 1.1" Soft-Dome Tweeter
- 6.5" Midrange
- 2 x 6.5" Paper Woofer
- 42-40k Hz Frequency Response
- 90 dB Sensitivity
- Impedance: 4ohms
- Power Range:50-300watts
- Weight:35.00kg
- Dimensions (H x W x D): 43-7/16" x 14-13/16" x 18-1/16" ( 1104.0 x 376.0 x 459.0mm )
Sonus faber Olympica I Key Specs
- 2-way Design
- 1.1" Soft-Dome Tweeter
- 6.5" Paper Woofer
- 57-40k Hz Frequency Response
- 87 dB Sensitivity
- Impedance: 4ohms
- Power Range:30-250watts
- Weight:11.00kg
- Dimensions (H x W x D): 14-9/16" x 8-1/4" x 14-9/16" ( 370.0 x 210.0 x 370.0mm )
Olympica III and Olympica I are members of Sonus faber's Olympica series of speakers. Below you can find the loudspeakers from this series.
Sonus faber Olympica Series
History
What size room are the Sonus faber Olympica III and Sonus faber Olympica I speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
Sonus faber Olympica III |
Sonus faber Olympica I |
| Near-field |
Poor |
Good |
| Small Room |
Average |
Good |
| Mid-size Room |
Good |
Average |
| Large Room |
Average |
Poor |
| Very Large Room |
Poor |
No way |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the Sonus faber Olympica III and Sonus faber Olympica I compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
One of the fundamental differences between these two speakers is that Olympica III is a 3-way design whereas the Olympica I is a 2-way speaker. 3-way designs utilize a midrange driver in addition to the tweeter and woofer on 2-way designs. Designing a crossover for a 3-way speaker is a complicated process and generally increases the overall cost of the speaker.
| Driver |
Sonus faber Olympica III |
Sonus faber Olympica I |
|
Driver Setup
|
3-way
|
2-way
|
|
Tweeter
|
1.1-inch
|
1.1-inch
|
|
Midrange
|
1 x 6.5-inch |
- |
|
Woofer
|
2 x 6.5-inch
|
1 x 6.5-inch
|
Olympica III features a 1.1" Silk Soft-Dome Tweeter , a 6.5" Midrange and 2 x 6.5" Paper Woofer with a Crossover frequency at 365 - 2460 Hz. On the other hand, the Olympica I features a 1.1" Silk Soft-Dome Tweeter and 1 x 6.5" Paper Woofer with a Crossover frequency at 2300 Hz.
Frequency Response
Olympica III has a frequency range of 42-40k Hz whereas Olympica I has a frequency range of 57-40k Hz. With a minimum frequency of 42Hz, the Olympica III can go significantly deeper on the low side and provide stronger bass compared to the Olympica I's min frequency of 57Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Olympica III and Olympica I have the same Impedance of 4 ohms but where they differ is the sensitivity levels. Olympica III sensitivity is rated at 90 dB and the Olympica I's is at 87 dB. This 3 dB difference makes the Sonus faber Olympica III a more sensitive speaker compared to Sonus faber Olympica I, hence will play louder with the same amount of watts.
One thing to keep in mind that the lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit comared to higher impedance speakers especially at high volume levels, so make sure the amp you pair with the Olympica III and the Olympica III can provide this impedance level.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using
an amplifier within this range ensures the nominal performance , inputting a power that is higher than the
max wattage can result in a damaged speaker.
Olympica III can handle a max power of 300 watts RMS from the amp the whereas Olympica I has a max power handling value of 250 watts RMS, 50 watts less than the Olympica III.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Olympica III features Binding post type posts and Olympica I has a Binding post type posts. None of these speakers feature bi-amping/bi-wiring.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Sonus faber Olympica III's and Sonus faber Olympica I's external dimensions. Sonus faber Olympica III has external dimensions of 1104.0 x 376.0 x 459.0mm ( 43-7/16 x 14-13/16 x 18-1/16inch) whereas Sonus faber Olympica I has external dimensions of 370.0 x 210.0 x 370.0mm ( 14-9/16 x 8-1/4 x 14-9/16inch) .
Sonus faber Olympica III is clearly the larger of the two speakers. Its body is 166mm wider, 734mm taller and 89mm deeper than Sonus faber Olympica I.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Sonus faber Olympica III is approximately 1725.8cm2 / 267.5inch2 and base area of the Sonus faber Olympica I is approximately 777.0cm2 / 120.4inch2. The Olympica III requires 122% more surface area than the Olympica I which gives it a small disadvantage on placement in tight spaces.