SpeakerDecision
  • SPEAKERS
    • By Type
      Passive Bookshelf Speakers Passive Floor-standing Speakers Passive Center Channel Speakers Passive In-wall Speakers All Passive Speakers Powered Subwoofers Powered Stereo Speakers
      By Feature
      HDMI Input Room Correction Subwoofer Output Front Firing Port Handheld Remote Roon Ready
      By Brand
      Acoustic Energy Aperion ATC Audio-Technica Audioengine Bluesound Bowers Wilkins Buchardt Cambridge Audio Canton DALI Definitive Technology Dynaudio ELAC Emotiva Fluance Focal Fyne Audio Genelec GoldenEar Harbeth Jamo JBL Kanto KEF KLH Klipsch Leak Mackie Magnepan MartinLogan McIntosh Mission MoFi Monitor Audio Nuvo Onkyo OSD Paradigm Perlisten Polk Audio PS Audio PSB Q Acoustics REL Revel Russound Sennheiser Sonos Sonus faber Sony Spendor SVS Tannoy Technics Triangle Velodyne Victrola Wharfedale Wilson Audio Yamaha
  • AMPLIFIERS
    • By Type
      All Amplifiers Integrated Amplifiers Stereo Receivers Streaming Amplifiers Power Amplifiers Compact Amplifiers
      By Power
      Up to 60 watts 61 to 90 watts 91 to 120 watts 121 to 180 watts Over 180 watts
      By Feature
      HDMI Input Room Correction Subwoofer Output Handheld Remote Roon Ready
      Home Theater
      All Home Theater Receivers Anthem ARCAM Denon Integra JBL Marantz McIntosh NAD Onkyo Sony Yamaha
      Headphone Amps
      All Headphone Amplifiers Cambridge Audio iFi Audio McIntosh Naim Pro-Ject Rotel Schiit Audio Sennheiser Yamaha
      Multi-Zone
      All Multi-Zone Amplifiers JBL McIntosh OSD Rotel Russound Sonos
      By Brand
      Accuphase Advance Paris Anthem Arcam Audio Research AudioControl Audioengine Audiolab Bluesound Bose Buchardt Cambridge Audio Cayin Denon Devialet ELAC Emotiva Eversolo FiiO Fosi Audio Hegel HiFi Rose Integra JBL Layer Audio Design LEAK Luxman Marantz Mark Levinson McIntosh Michi MISSION MOON Musical Fidelity NAD Naim Onkyo OSD Parasound Pass Labs Peachtree PrimaLuna Primare PS Audio Rega Rogue Audio Roksan Rotel Schiit Audio Sonos Sony SVS T+A TEAC Technics Vincent WiiM Yamaha
  • SMART FIND
  • TOOLS
  • BLOG
  1. Home
  2. Sonus faber Speakers
  3. Sonus faber Olympica I vs Sonus faber Olympica Center

Sonus faber Olympica I vs Sonus faber Olympica Center Comparison

x
Speaker to replace
Change

Sonus faber Olympica I

Passive Bookshelf | 57-40k Hz

Sonus faber Olympica I
Check price atAmazon›
Change
    
Sonus faber Olympica Center

Passive Center Channel | 58-40k Hz

Sonus faber Olympica Center
Check price atAmazon›
Sonus faber Olympica I Sonus faber Olympica...
Check price atAmazon›
Sonus faber Olympica Center Sonus faber Olympica...
Check price atAmazon›
Sonus faber Olympica...
See at AMAZON
Sonus faber Olympica...
See at AMAZON

Sonus faber Olympica I vs Sonus faber Olympica Center Speaker Comparison

In this review, we will be comparing two different types of speakers by Sonus faber. Sonus faber Olympica I is a Bookshelf speaker whereas the Olympica Center is a Center Channel speaker.

Let's have a brief look at the main features of Sonus faber Olympica I and Sonus faber Olympica Center first before getting into our more detailed comparison.

Key SpecsSonus faber Olympica ISonus faber Olympica Center
BrandSonus faber
Italy · founded 1983
Sonus faber
Italy · founded 1983
Design2-way3-way
Tweeter1.1" Soft-Dome0.75" Soft-Dome
Midrange—4"
Woofer6.5" Paper2 x 6.5" Paper
Frequency response57-40k Hz58-40k Hz
Sensitivity87 dB90 dB
Impedance4 ohms4 ohms
Power range30-250 watts50-300 watts
Weight11.00kg / 24.2lbs21.00kg / 46.2lbs
Dimensions (H x W x D)14-9/16" x 8-1/4" x 14-9/16"
370.0 x 210.0 x 370.0mm
8-7/8" x 27-3/4" x 16-9/16"
225.0 x 705.0 x 420.0mm

Olympica I and Olympica Center are members of Sonus faber's Olympica series of speakers. Below you can find the loudspeakers from this series.

Sonus faber Olympica Series History
Model Body Frequency SensitivityImpedance Woofer
Sonus faber Olympica I
Bookshelf 57-40k Hz 87 dB4Ω 1 x 6.5"
Sonus faber Olympica III
  
Floor-standing 42-40k Hz 90 dB4Ω 2 x 6.5"
Sonus faber Olympica Center
Center Channel 58-40k Hz 90 dB4Ω 2 x 6.5"
Sonus faber Olympica V
  
Floor-standing 37-40k Hz 90 dB4Ω 3 x 6.5"
Sonus faber Olympica Nova W
  
On-wall 78-40k Hz 89 dB4Ω 1 x 6.5"

What size room are the Sonus faber Olympica I and Sonus faber Olympica Center speakers good for?

The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:

Listening Environment* Sonus faber Olympica I Sonus faber Olympica Center
Near-field Good Good
Small Room Good Good
Mid-size Room Average Average
Large Room Poor Poor
Very Large Room No way No way

(* Approximate Room sizes: Small < 100sq. ft / 9 m2, Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: > 400 sq. ft / 36 m2. Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual listening experience changes depending on floor height, room shape, surface materials, listening position, speaker locations, etc.)

The sections below take each area in turn: drivers, frequency response, physical size and what you get in the box.


Drivers

One of the fundamental differences between these two speakers is that Olympica I is a 2-way design whereas the Olympica Center is a 3-way speaker. 3-way designs utilize a midrange driver in addition to the tweeter and woofer on 2-way designs. Designing a crossover for a 3-way speaker is a complicated process and generally increases the overall cost of the speaker.

Tweeter - 1.1 inchWoofer - 6.5 inch
Sonus faber Olympica I
Woofer - 6.5 inchTweeter - 0.75 inchMidrange - 4 inchWoofer - 6.5 inch
Sonus faber Olympica Center

TweeterMidrangeWoofer

Front view, drawn to scale - cabinets and drivers share one scale, so sizes are directly comparable. Hover a driver for its size.

Driver Sonus faber Olympica I Sonus faber Olympica Center
Driver Setup 2-way 3-way
Tweeter 1.1-inch 0.75-inch
Midrange - 1 x 4-inch
Woofer 1 x 6.5-inch 2 x 6.5-inch

Olympica I features a 1.1" Silk Soft-Dome Tweeter and 1 x 6.5" Paper Woofer with a Crossover frequency at 2300 Hz. On the other hand, the Olympica Center features a 0.75" Silk Soft-Dome Tweeter, a 4" Midrange and 2 x 6.5" Paper Woofer with a Crossover frequency at 600 - 2900 Hz.

Sonus faber Olympica I driver frequency bandsSonus faber Olympica ISonus faber Olympica Center57-2.3k58-600Woofer600-2.9kMidrange2.3k-40k2.9k-40kTweeter20501002005001k2k5k10k20k40kHz, log scale

Frequency Response

Olympica I has a frequency range of 57-40k Hz whereas Olympica Center has a frequency range of 58-40k Hz. With a minimum frequency of 57Hz, the Olympica I can go slightly deeper then the Olympica Center's min frequency of 58Hz.

The graph below depicts how these two speakers compare with the max, min and average Low Frequency values of other speakers in the Bookshelf class in our database.

Low Frequency

Bookshelf Speakers

Olympica I
Olympica Center
Min
Average
Median

Neither pair reaches down to 20Hz, the usual definition of full-range, which is normal for speakers of this size. If you want the bottom octave for movies or bass-heavy music, add a subwoofer to whichever you choose. Visit our Powered Subwoofers section to find out more about the available options.

Impedance and Sensitivity

Olympica I and Olympica Center have the same Impedance of 4 ohms but where they differ is the sensitivity levels. Olympica I sensitivity is rated at 87 dB and the Olympica Center's is at 90 dB. This 3 dB difference makes the Sonus faber Olympica Center a more sensitive speaker compared to Sonus faber Olympica I, hence will play louder with the same amount of watts.

One thing to keep in mind that the lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit comared to higher impedance speakers especially at high volume levels, so make sure the amp you pair with the Olympica I and the Olympica I can provide this impedance level.

Sensitivity

Bookshelf Speakers

Olympica I
Olympica Center
Min
Average
Median

Power Range

Power range is the range of input power in watts RMS that a loudspeaker is designed to handle. Staying within that range gives nominal performance; driving the speaker beyond its maximum wattage can damage it.

Olympica Center can handle a max power of 300 watts RMS, whereas Olympica I has a max power handling value of 250 watts RMS, 50 watts less than the Olympica Center.

Note that higher power handling does not make a speaker louder: that depends mainly on sensitivity and impedance. The calculator below shows how loud each of these actually plays on a real amplifier.

Which plays louder on your amplifier?

Starting with a popular amplifier - change it to the one you own, or any you are considering, and watch both numbers move.

Sonus faber Olympica I
 
Sonus faber Olympica Center
 

Input Type and Bi-Amping / Bi-Wiring

Both Olympica I and Olympica Center features dual binding post speaker terminals for bi-amping or bi-wiring.

Physical Specs

The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Sonus faber Olympica I's and Sonus faber Olympica Center's external dimensions. Sonus faber Olympica I has external dimensions of 370.0 x 210.0 x 370.0mm (14-9/16 x 8-1/4 x 14-9/16inch) whereas Sonus faber Olympica Center has external dimensions of 225.0 x 705.0 x 420.0mm (8-7/8 x 27-3/4 x 16-9/16inch).

Sonus faber Olympica I is 495mm narrower and 50mm less deeper than Sonus faber Olympica Center but it is also 145mm taller.

Size, drawn to scale

FRONTSonus faber Olympica I front: 210 x 370 mm (8.3 x 14.6 in)Sonus faber Olympica Center front: 705 x 225 mm (27.8 x 8.9 in)Sonus faber Olympica I210 × 370 mmSonus faber Olympica Center705 × 225 mmTOP / FOOTPRINTSonus faber Olympica I footprint: 210 x 370 mm (8.3 x 14.6 in)Sonus faber Olympica Center footprint: 705 x 420 mm (27.8 x 16.5 in)Sonus faber Olympica I210 × 370 mmSonus faber Olympica Center705 × 420 mm
Both speakers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.

One scale for both, standing on the same surface and pushed back to the same wall, so the deeper one visibly sticks out further.

Sonus faber Olympica Center needs about 281% more floor or shelf area. Sonus faber Olympica Center is 50mm deeper, so it stands that much further out from the wall. Sonus faber Olympica I is 145mm taller.

Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited. The base surface area of the Sonus faber Olympica I is approximately 777.0cm2 / 120.4inch2 and base area of the Sonus faber Olympica Center is approximately 2961.0cm2 / 459.0inch2. The Olympica I requires 74% less surface area than the Olympica Center which gives it a small advantage on placement in tight spaces.


Reasons to choose Sonus faber Olympica I over Sonus faber Olympica Center

Low Frequency Response 57 Hz vs 58 Hz Generates deeper bass
Base Surface Area 777cm2 vs 2961cm2 Takes less floor space

Reasons to choose Sonus faber Olympica Center over Sonus faber Olympica I

Max Input Power 300 watts vs 250 watts Handle more power from your amplifier
Driver Setup 3-way vs 2-way Have a dedicated mid-range driver
Sensitivity 90 dB vs 87 dB Play louder with same amount of amplification power
Number of Woofers 2 vs 1 More woofers
Height 225mm vs 370mm Easier to fit in smaller spaces
Price per pair* 4500USD vs 6500USD costs less (*prices may change depending on the seller, location and time)

Sonus faber Olympica I vs Sonus faber Olympica Center Specs Table

Detailed comparison of specifications
General Sonus faber Olympica I Sonus faber Olympica Center
Brand Sonus faber Sonus faber
Speaker Type Bookshelf speakers Center Channel speaker
Power Range 30-250 watts 50-300 watts
Sensitivity 87 dB 90 dB
Impedance 4 ohms 4 ohms
Frequency Response 57-40k Hz 58-40k Hz
Drivers
Woofer Quantity 1 2
Woofer Size 6.5" 6.5"
Woofer Composition Paper Paper
Tweeter Size 1.1" 0.75"
Tweeter Type Soft-Dome Soft-Dome
Aimable Tweeter No No
Midrange Driver No 4"
Crossover Frequency 2300 Hz 600 - 2900 Hz
Physical Specs
Height 370.0mm (14.6") 225.0mm (8.9")
Width 210.0mm (8.3") 705.0mm (27.8")
Depth 370.0mm (14.6") 420.0mm (16.5")
Weight 11.00kg (24.2lbs) 21.00kg (46.2lbs)
Enclosure Bass Reflex Bass Reflex
Mounting Bracket
Grille Yes Yes
Moisture Resistancy No No
Connections
Biamp Inputs Yes Yes
Other
Parts Warranty
Labor Warranty

Verdict

Siblings in Sonus faber's Olympica series, so they share a family sound. It comes down to size, output and price.

AreaBetterWhy
Bassevenly matchedMuch the same reach (57Hz vs 58Hz).
Amplifier needsBSonus faber Olympica Center is more sensitive (90dB vs 87dB), so it goes louder on the same amplifier.
Headroomevenly matchedSimilar power handling (250W vs 300W).
SizedependsSonus faber Olympica I is easier to place; Sonus faber Olympica Center is bigger, which usually goes with fuller bass. Your room decides.
TypedependsA Passive Bookshelf against a Passive Center Channel - a different job rather than a better one.
ExpandabilitydependsSonus faber Olympica I: bi-amping; Sonus faber Olympica Center: bi-amping.
PriceBSonus faber Olympica Center is cheaper - $4,500 against $6,500, about 31% less.

A Sonus faber Olympica I  B Sonus faber Olympica Center
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both speakers are judged; anything missing on either side is left out rather than guessed.

Which should you choose?

Sonus faber Olympica Center has the edge on paper, though the margin is not large. The rows marked "depends" may matter more to you than the score does. In a large or open-plan room, Sonus faber Olympica Center has the cabinet volume to fill it more easily; in a small room, near a wall or at desk distance, Sonus faber Olympica I is the easier speaker to get right. If your amplifier is modest, vintage or valve-based, Sonus faber Olympica Center is the safer partner - the other will want more current or more watts to sound its best.

And remember what a spec sheet cannot show: how each looks in your room and whether the finish suits it, what dealer support and warranty are like where you live, and how they actually sound to you. If you can hear them first - ideally with your own music - that will tell you more than any number above.


Most Popular Speakers
Klipsch Reference R-51M
Klipsch R-51M
2-way | 93 dB | 8 ohms
ELAC Debut 2.0 B6.2
ELAC Debut 2.0 B6.2
2-way | 87 dB | 6 ohms
Wharfedale Elysian 2
Wharfedale Elysian 2
3-way | 89 dB | 4 ohms
KEF Q150
KEF Q150
2-way | 86 dB | 8 ohms
Bowers & Wilkins 606 S2 Anniversary Edition
B&W 606 S2
2-way | 88 dB | 8 ohms
Klipsch Reference Premiere RP-500M
Klipsch RP-500M
2-way | 93 dB | 8 ohms
Wharfedale EVO5.1
Wharfedale EVO5.1
2-way | 87 dB | 4 ohms
Wharfedale EVO4.1
Wharfedale EVO4.1
2-way | 87 dB | 8 ohms
This site contains affiliate links. We may be compensated if you make a purchase after clicking through one of them. As an Amazon Associate we earn from qualifying purchases.
Copyright © 2026 by SpeakerDecision
About Privacy Contact US Camera Decision

Report a Correction